{"id":9046,"date":"2025-09-01T05:34:24","date_gmt":"2025-09-01T05:34:24","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&#038;p=9046"},"modified":"2026-11-18T03:21:40","modified_gmt":"2026-11-18T03:21:40","slug":"hlinikova-ctvercova-trubka-7075","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/cs\/product\/7075-aluminum-square-tube\/","title":{"rendered":"Hlin\u00edkov\u00e1 \u010dtvercov\u00e1 trubka 7075-O\/T6\/T651\/T73\/T7351"},"content":{"rendered":"<h2>Co je 7075 hlin\u00edkov\u00e1 \u010dtvercov\u00e1 trubka?<\/h2>\n<p>7075 aluminum square tube is a hollow square Al-Zn-Mg-Cu section at 570 MPa in T6 &mdash; the strongest aluminium tube in general supply. It is specified when a square member has to carry a load no 6xxx section can and the weight is fixed by the design: aerospace structure, competition components, high-load machine members. Two limits belong on the drawing: 7075 is not weldable, and it has only moderate corrosion resistance with a stress-corrosion risk in thick walls. Square is also the profile that shows twist most clearly, so straightness matters more here than on round tube. Alloy data: <a href=\"https:\/\/premiumalu.com\/cs\/produkt\/slitina-hliniku-7075\/\">Slitina hlin\u00edku 7075<\/a>.<\/p>\n<h2>Rozsah rozm\u011br\u016f \u2014 strana, st\u011bna a d\u00e9lka<\/h2>\n<table>\n<tr>\n<th>Polo\u017eka<\/th>\n<th>Rozsah<\/th>\n<\/tr>\n<tr>\n<td>Vn\u011bj\u0161\u00ed strana<\/td>\n<td>10 \u2013 300 mm<\/td>\n<\/tr>\n<tr>\n<td>Tlou\u0161\u0165ka st\u011bny<\/td>\n<td>1 &ndash; 30 mm<\/td>\n<\/tr>\n<tr>\n<td>D\u00e9lka<\/td>\n<td>A\u017e 16 000 mm, \u0159ez na m\u00edru<\/td>\n<\/tr>\n<tr>\n<td>Tempery<\/td>\n<td>O \/ T6 \/ T6511 \/ T73511<\/td>\n<\/tr>\n<tr>\n<td>Normy<\/td>\n<td>ASTM B221, ASTM B241<\/td>\n<\/tr>\n<\/table>\n<p><strong>K ozna\u010den\u00ed.<\/strong> Extruded tube is stress relieved to T6511 or T73511. T651 and T7351 are plate designations and cannot appear on a hollow-section certificate &mdash; if a drawing specifies them on tube, the specification and the product form disagree.<\/p>\n<h2>Tempery a mechanick\u00e9 vlastnosti<\/h2>\n<table>\n<tr>\n<th>Temperament<\/th>\n<th>Pevnost v tahu (MPa)<\/th>\n<th>Mez kluzu (MPa)<\/th>\n<th>Prodlou\u017een\u00ed<\/th>\n<th>Smyk (MPa)<\/th>\n<\/tr>\n<tr>\n<td>O<\/td>\n<td>230 \u2013 290<\/td>\n<td>95 \u2013 145<\/td>\n<td>10 \u2013 13%<\/td>\n<td>150<\/td>\n<\/tr>\n<tr>\n<td>T6<\/td>\n<td>540 \u2013 570<\/td>\n<td>480 \u2013 505<\/td>\n<td>8 \u2013 11%<\/td>\n<td>330<\/td>\n<\/tr>\n<tr>\n<td>T6511<\/td>\n<td>540 \u2013 570<\/td>\n<td>480 \u2013 505<\/td>\n<td>8 \u2013 11%<\/td>\n<td>330<\/td>\n<\/tr>\n<tr>\n<td>T73511<\/td>\n<td>470 \u2013 500<\/td>\n<td>390 \u2013 420<\/td>\n<td>8 \u2013 11%<\/td>\n<td>285<\/td>\n<\/tr>\n<\/table>\n<p>Typical AA reference figures; confirm against the MTC. Density 2.81 g\/cm&sup3;, elastic modulus 71.7 GPa. A square section concentrates stress at the inside corners, so in 7075 the T73 tempers are not a luxury on thick walls &mdash; they are what stops a corner crack starting.<\/p>\n<h2>Kter\u00e1 temperace \u2014 T6, T6511 nebo T73511<\/h2>\n<p><strong>T6 je \u0161pi\u010dkov\u00e1 pevnost<\/strong> for a tube machined at the ends and used dry. <strong>T6511 m\u00e1 stejnou pevnost, je zbavena pnut\u00ed a vyrovn\u00e1na<\/strong> &mdash; worth ordering on long square tube, where twist matters and machining is planned.<\/p>\n<p><strong>T73511 is overaged on purpose<\/strong>, giving up about 70 MPa to buy much better resistance to stress-corrosion cracking. For thick walls, sustained tension, or wet and salty service, that trade is usually correct.<\/p>\n<h2>7075 vs 2024 vs 6061 Square Tube<\/h2>\n<table>\n<tr>\n<th>Slitina \/ stav<\/th>\n<th>Pevnost v tahu (MPa)<\/th>\n<th>Mez kluzu (MPa)<\/th>\n<th>Kde se hod\u00ed<\/th>\n<\/tr>\n<tr>\n<td><strong>7075-T6 \/ T6511<\/strong><\/td>\n<td>570<\/td>\n<td>505<\/td>\n<td>Maximum-strength square members, aerospace, competition<\/td>\n<\/tr>\n<tr>\n<td>2024-T3<\/td>\n<td>483<\/td>\n<td>345<\/td>\n<td>Fatigue-critical square structure<\/td>\n<\/tr>\n<tr>\n<td>6061-T6<\/td>\n<td>310<\/td>\n<td>276<\/td>\n<td>R\u00e1my stroj\u016f, reg\u00e1ly, ochrann\u00e9 kryty<\/td>\n<\/tr>\n<\/table>\n<p>7075 is about 85% stronger than 6061 and costs more with fewer suppliers. <strong>Specifikujte ji, kdy\u017e je zat\u00ed\u017een\u00ed d\u00e1no a hmotnost nesm\u00ed nar\u016fst<\/strong>; if a thicker 6061 tube would carry the same load, it is cheaper, weldable and more corrosion-tolerant.<\/p>\n<h2>\u010ctvercov\u00fd nebo obd\u00e9ln\u00edkov\u00fd \u2014 a polom\u011br rohu<\/h2>\n<p><strong>\u010ctvercov\u00fd d\u00e1v\u00e1 stejnou tuhost v obou sm\u011brech<\/strong> a sn\u00e1ze se detailuje v spoj\u00edch; <strong>obd\u00e9ln\u00edkov\u00fd umis\u0165uje materi\u00e1l tam, kde je ohyb<\/strong> and is lighter for a one-direction beam. On 7075 the choice is usually driven by the existing design, because the alloy is specified late in a project rather than at concept stage.<\/p>\n<p><strong>Polom\u011br rohu<\/strong> is where 7075 is harder than 6xxx: it extrudes less cleanly, so corners are less tight and less consistent. If the joint depends on the corner &mdash; a connector or a sliding fit &mdash; send the connector drawing rather than assuming a sharp corner.<\/p>\n<h2>Rovinnost, zkroucen\u00ed a v\u00fdroba<\/h2>\n<p><strong>Twist matters more on square tube than round.<\/strong> A twisted square will not sit flat, will not slide into another section, and pulls a welded frame out of square &mdash; and 7075 cannot be straightened by welding or heat. Specify straightness if the assembly is dimensionally critical.<\/p>\n<p><strong>Oh\u00fdb\u00e1n\u00ed:<\/strong> not practical. Square sections collapse at the corners, and 7075 has low elongation in T6 &mdash; it will crack before it forms. Frames are fabricated from mitred segments.<\/p>\n<p>On incoming inspection, check twist before anything else. Put the tube on a surface plate and look for rock; a straightened 7075 square section should sit flat over its length, and a member that rocks will not assemble into a square frame no matter how the holes are drilled. Thickness and side are easy to measure; twist is the defect that reaches the assembly stage and cannot be fixed there.<\/p>\n<p><strong>\u0158ez\u00e1n\u00ed a spojov\u00e1n\u00ed:<\/strong> sawed square or mitred; 7075 saws with heat, so use coolant and a sharp blade to avoid a hardened burr. <strong>No welding<\/strong> &mdash; design for mechanical fastening or bonding.<\/p>\n<p><strong>Povrch:<\/strong> anodizing protects less than on 6xxx and darkens; use hard anodizing or a coating, and consider T73511 where corrosion matters.<\/p>\n<h2>Aplikace<\/h2>\n<p>Aerospace structure and fittings, competition vehicle frames, high-load machine members, gantry arms, precision instrument frames, defence equipment, sporting goods components where weight is fixed by design.<\/p>\n<h2>Dokumenty kvality a jak specifikovat<\/h2>\n<p>Every order ships with an MTC reporting alloy, temper, side, wall and mechanical results against ASTM B221 or B241. For aerospace or pressure work, state the test and certification requirement on the enquiry. Third-party testing is available on request at additional cost; production runs under ISO 9001, ISO 14001 and ISO 45001 certified systems.<\/p>\n<p>Pro nab\u00eddku v jednom kole po\u0161lete: <strong>strana \u00d7 st\u011bna \u00d7 d\u00e9lka<\/strong>, <strong>stav zpracov\u00e1n\u00ed<\/strong> (T6511 pro obr\u00e1b\u011bn\u00ed, T73511 pro tlust\u00e9 st\u011bny nebo mokr\u00e9 prost\u0159ed\u00ed), <strong>po\u017eadavek na p\u0159\u00edmost<\/strong>, <strong>\u00faprava konc\u016f<\/strong>, a <strong>m\u00edsto ur\u010den\u00ed<\/strong>.<\/p>\n<h2>Pro\u010d si vybrat Linsy<\/h2>\n<p>Hlin\u00edk\u00e1rna se s\u00eddlem v Shenzhenu, v\u00edce ne\u017e 20 let v oboru, dod\u00e1vaj\u00edc\u00ed slitiny \u0159ady 1000\u20138000 ve standardn\u00edch specifikac\u00edch a zak\u00e1zkov\u00fdch rozm\u011brech.<\/p>\n<ul>\n<li>MTC s ka\u017edou objedn\u00e1vkou, uv\u00e1d\u011bj\u00edc\u00ed stranu, tlou\u0161\u0165ku st\u011bny a stav vytvrzen\u00ed<\/li>\n<li>7075 square tube 10&ndash;300 mm side, 1&ndash;30 mm wall, up to 16,000 mm<\/li>\n<li>\u0158ezan\u00e9 a pokosov\u00e9 konce na vy\u017e\u00e1d\u00e1n\u00ed<\/li>\n<li>Technick\u00e1 kontrola temperace a tlou\u0161\u0165ky st\u011bny p\u0159ed p\u0159ijet\u00edm objedn\u00e1vky<\/li>\n<li>Testov\u00e1n\u00ed SGS na vy\u017e\u00e1d\u00e1n\u00ed; objedn\u00e1vky se sm\u00ed\u0161enou specifikac\u00ed a projektov\u00e9 objedn\u00e1vky vy\u0159izov\u00e1ny jako jedna objedn\u00e1vka<\/li>\n<\/ul>\n<h2>Souvisej\u00edc\u00ed zdroje<\/h2>\n<ul>\n<li><a href=\"https:\/\/premiumalu.com\/cs\/produkt\/hlinikova-kulata-trubka-7075\/\">Hlin\u00edkov\u00e1 kulat\u00e1 trubka 7075<\/a> a <a href=\"https:\/\/premiumalu.com\/cs\/produkt\/hlinikova-kulata-tyc-7075\/\">ty\u010d kruhov\u00e9ho pr\u016f\u0159ezu<\/a><\/li>\n<li><a href=\"https:\/\/premiumalu.com\/cs\/produkt\/2024-hlinikova-ctvercova-trubka\/\">2024 hlin\u00edkov\u00e1 \u010dtvercov\u00e1 trubka<\/a> \u2014 lep\u0161\u00ed odolnost proti \u00fanav\u011b<\/li>\n<li><a href=\"https:\/\/premiumalu.com\/cs\/produkt\/hlinikova-ctvercova-trubka-6061\/\">Hlin\u00edkov\u00e1 \u010dtvercov\u00e1 trubka 6061<\/a> \u2014 sva\u0159iteln\u00e1 a korozivzdorn\u00e1<\/li>\n<li><a href=\"https:\/\/premiumalu.com\/cs\/konecny-pruvodce-vlastnostmi-hliniku-7075-t73\/\">Vlastnosti hlin\u00edku 7075-T73<\/a><\/li>\n<\/ul>\n<h2>\u010cast\u00e9 dotazy k 7075 hlin\u00edkov\u00e9 \u010dtvercov\u00e9 trubce<\/h2>\n<p><strong>Q: Is 7075 square tube welded or seamless?<\/strong><br \/>A: Seamless. 7075 does not weld, so a seam-welded product sold as 7075 should be questioned.<\/p>\n<p><strong>Q: Why T6511 and not T651?<\/strong><br \/>A: T651 is a plate designation and cannot appear on a tube certificate. The same applies to T7351 versus T73511.<\/p>\n<p><strong>Q: Can 7075 square tube be bent?<\/strong><br \/>A: No, not practically. Square sections collapse at the corners and 7075 in T6 cracks before it forms. Fabricate from mitred segments.<\/p>\n<p><strong>Q: Does twist matter on square tube?<\/strong><br \/>A: More than on round. A twisted square will not sit flat or slide into another section, and 7075 cannot be straightened afterwards. Specify straightness if the assembly is critical.<\/p>\n<p><strong>Ot\u00e1zka: Jak\u00e9 rozm\u011bry dod\u00e1v\u00e1te?<\/strong><br \/>A: 10&ndash;300 mm side, 1&ndash;30 mm wall, up to 16,000 mm length.<\/p>","protected":false},"excerpt":{"rendered":"<p>7075 aluminum square tube is a hollow square Al-Zn-Mg-Cu section at 570 MPa in T6 &mdash; the strongest aluminium tube in general supply. Specified when a square member must carry a load no 6xxx section can, and weight is fixed. Not weldable; the T73511 tempers address stress corrosion in thick walls.<\/p>\n<p><strong>Strana:<\/strong> 10\u2013300 mm<br \/><strong>Tlou\u0161\u0165ka st\u011bny:<\/strong> 1&ndash;30 mm<br \/><strong>Tempery:<\/strong> O \/ T6 \/ T6511 \/ T73511<br \/><strong>Pouze beze\u0161v\u00e9<\/strong><br \/><strong>Dokumenty t\u00fdkaj\u00edc\u00ed se kvality:<\/strong> Protokol o zkou\u0161ce z materi\u00e1lu (MTC) s ka\u017edou objedn\u00e1vkou<\/p>","protected":false},"featured_media":9069,"template":"","meta":{"_seopress_titles_title":"7075 Aluminum Square Tube \u2014 Supplier | Linsy Aluminum","_seopress_titles_desc":"7075 aluminum square tube in O, T6, T6511 and T73511. High-strength hollow section for aerospace frames, MTC per order.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[191],"product_tag":[],"class_list":["post-9046","product","type-product","status-publish","has-post-thumbnail","product_cat-aluminum-round-tube","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product\/9046","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/media\/9069"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/media?parent=9046"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product_brand?post=9046"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product_cat?post=9046"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product_tag?post=9046"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}