{"id":9203,"date":"2025-09-23T09:26:00","date_gmt":"2025-09-23T09:26:00","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&p=9203"},"modified":"2026-07-08T15:01:15","modified_gmt":"2026-07-08T15:01:15","slug":"slitina-hliniku-6201","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/cs\/produkt\/slitina-hliniku-6201\/","title":{"rendered":"Slitina hlin\u00edku 6201"},"content":{"rendered":"

What Is 6201 Aluminum Alloy?<\/h2>\n

6201 aluminum is a heat-treatable 6xxx series alloy developed for electrical conductor applications. With a silicon-magnesium composition and moderate strength, it combines good electrical conductivity with resistance to stress-corrosion cracking. It is most commonly supplied in the T81 temper for busbars, conductor rails, and overhead line hardware where a balance of conductivity and mechanical strength is required.<\/p>\n

Available 6201 Aluminum Products<\/h2>\n

6201 is primarily an electrical conductor alloy, most often supplied as wire and rod for busbar and overhead line use. The following forms and size ranges are typical; custom dimensions can be negotiated.<\/p>\n

6201 Aluminum Wire & Rod<\/h3>\n\n\n\n\n\n
Formul\u00e1\u0159<\/strong><\/td>\nSize Range<\/strong><\/td>\nTemperament<\/strong><\/td>\n<\/tr>\n
Wire (coil)<\/td>\n0.8 \u2013 30 mm diameter<\/td>\nT81, T6<\/td>\n<\/tr>\n
Drawn rod<\/td>\n6 \u2013 60 mm diameter<\/td>\nT81, T6<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6201 Aluminum Bar<\/h3>\n\n\n\n\n
Formul\u00e1\u0159<\/strong><\/td>\nSize Range<\/strong><\/td>\nTemperament<\/strong><\/td>\n<\/tr>\n
Round \/ square bar<\/td>\n6 \u2013 300 mm diameter<\/td>\nT81, T6, T4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6201 Aluminum Sheet & Coil<\/h3>\n\n\n\n\n
Formul\u00e1\u0159<\/strong><\/td>\nSize Range<\/strong><\/td>\nTemperament<\/strong><\/td>\n<\/tr>\n
Sheet \/ coil<\/td>\n0.5 \u2013 10 mm thickness, 500 \u2013 2600 mm width<\/td>\nT6, T4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6201 Aluminum Tube & Profile<\/h3>\n

Extruded tube and profile in T6 temper are available on request; typical outside diameters range from 6 to 300 mm. Length is normally up to 12,000 mm and can be cut to order.<\/p>\n

6201 Specifications & Equivalent Designations<\/h2>\n\n\n\n\n\n\n\n\n
Syst\u00e9m<\/strong><\/td>\nOzna\u010den\u00ed<\/strong><\/td>\n<\/tr>\n
AA (USA)<\/td>\n6201<\/td>\n<\/tr>\n
EN AW<\/td>\nEN AW-6201<\/td>\n<\/tr>\n
UNS<\/td>\nA96201<\/td>\n<\/tr>\n
ISO<\/td>\nAlMg0.7Si<\/td>\n<\/tr>\n
B\u011b\u017en\u00e9 stavy<\/td>\nT4, T6, T81<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Chemical Composition of 6201 Aluminum<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Prvek<\/strong><\/td>\nObsah (%)<\/strong><\/td>\n<\/tr>\n
K\u0159em\u00edk (Si)<\/td>\n0.50 \u2013 0.90<\/td>\n<\/tr>\n
\u017delezo (Fe)<\/td>\nmax 0,50<\/td>\n<\/tr>\n
M\u011b\u010f (Cu)<\/td>\n0,10 max<\/td>\n<\/tr>\n
Mangan (Mn)<\/td>\n0.03 max<\/td>\n<\/tr>\n
Ho\u0159\u010d\u00edk (Mg)<\/td>\n0.60 \u2013 0.90<\/td>\n<\/tr>\n
Zinek (Zn)<\/td>\n0,10 max<\/td>\n<\/tr>\n
Titan (Ti)<\/td>\n0.03 max<\/td>\n<\/tr>\n
Ostatn\u00ed (ka\u017ed\u00fd)<\/td>\n0,05 max<\/td>\n<\/tr>\n
Ostatn\u00ed (celkem)<\/td>\n0,15 max<\/td>\n<\/tr>\n
Hlin\u00edk (Al)<\/td>\nZbytek<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Mechanick\u00e9 vlastnosti podle zp\u016fsobu temperov\u00e1n\u00ed<\/h2>\n

Values below are typical AA reference figures for 6201 and should be confirmed against Linsy mill test data before specification.<\/p>\n\n\n\n\n\n\n
Temperament<\/strong><\/td>\nPevnost v tahu (MPa)<\/strong><\/td>\nMez kluzu (MPa)<\/strong><\/td>\nProdlou\u017een\u00ed (%)<\/strong><\/td>\nPevnost ve smyku (MPa)<\/strong><\/td>\n<\/tr>\n
T4<\/td>\n200<\/td>\n120<\/td>\n15<\/td>\n\u2014<\/td>\n<\/tr>\n
T6<\/td>\n300<\/td>\n260<\/td>\n10<\/td>\n\u2014<\/td>\n<\/tr>\n
T81<\/td>\n310<\/td>\n275<\/td>\n8<\/td>\n193<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Pr\u016fvodce v\u00fdb\u011brem tvrzenosti<\/h2>\n\n\n\n\n\n\n
Temperament<\/strong><\/td>\nKdy pou\u017e\u00edt<\/strong><\/td>\n<\/tr>\n
T4<\/td>\nSolution heat-treated and naturally aged; higher ductility for forming before final use.<\/td>\n<\/tr>\n
T6<\/td>\nSolution heat-treated and artificially aged; higher strength for general structural conductors.<\/td>\n<\/tr>\n
T81<\/td>\nSolution heat-treated, cold-worked, and artificially aged; the standard temper for 6201 busbar and conductor wire offering the best strength-to-conductivity balance.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Key Characteristics of 6201 Aluminum<\/h2>\n

Elektrick\u00e1 vodivost<\/h3>\n

6201 offers good conductivity (approximately 53% IACS in the T81 temper), making it suitable for power transmission and distribution components.<\/p>\n

Strength & Corrosion Resistance<\/h3>\n

Compared with pure aluminum conductor grades, 6201 provides significantly higher strength while retaining good corrosion resistance and resistance to stress-corrosion cracking.<\/p>\n

Formability & Joining<\/h3>\n

The alloy is typically used in the as-supplied temper; welding is uncommon for electrical conductors, and mechanical connections (bolting, crimping) are preferred.<\/p>\n

B\u011b\u017en\u00e9 aplikace<\/h2>\n
    \n
  • Busbars and conductor rails<\/li>\n
  • Transmission tower components<\/li>\n
  • Electrical fittings and connectors<\/li>\n
  • Structural supports in electrical systems<\/li>\n<\/ul>\n

    Pozn\u00e1mky ke zpracov\u00e1n\u00ed a povrchov\u00e9 \u00faprav\u011b<\/h2>\n

    6201 wire and rod are supplied in the drawn or extruded condition. Cutting, bending, and punching are standard fabrication steps. Anodizing is not typical for electrical conductor use; consult our team before specifying a surface finish on conductive parts.<\/p>\n

    Kvalitn\u00ed dokumentace a kontrola<\/h2>\n

    Every 6201 order ships with a Mill Test Certificate (EN 10204 3.1 MTC) covering composition and mechanical properties. SGS or third-party inspection can be arranged on request.<\/p>\n

    Why Choose Linsy for 6201 Aluminum<\/h2>\n
      \n
    • V\u00fdrobn\u00ed z\u00e1kladna v Shenzhenu s v\u00edce ne\u017e 20 lety zku\u0161enost\u00ed s v\u00fdrobou hlin\u00edku.<\/li>\n
    • Full 1000\u20138000 series coverage, including electrical grades such as 6201, 6101, and 1350.<\/li>\n
    • In-house processing: cutting, CNC machining, and custom drawing.<\/li>\n
    • Certifikovan\u00e9 syst\u00e9my \u0159\u00edzen\u00ed kvality a \u017eivotn\u00edho prost\u0159ed\u00ed ISO 9001, ISO 14001 a ISO 45001.<\/li>\n
    • MTC provided with every shipment.<\/li>\n<\/ul>\n

      Souvisej\u00edc\u00ed zdroje<\/h2>\n

      Comparison guides between conductor grades (for example 6101 vs 6201) and general aluminum selection notes can be linked to this page. Blog resources are being consolidated and will be added before launch.<\/p>\n

      6201 Aluminum FAQ<\/h2>\n

      Is 6201 the same as 6101?<\/h3>\n

      No. Both are electrical conductor alloys, but 6201 has a higher magnesium range and is typically used in the T81 temper for busbar, while 6101 is more common for wire and strand.<\/p>\n

      What conductivity can I expect?<\/h3>\n

      In the T81 temper, 6201 typically reaches about 53% IACS. Confirm exact values from the MTC for your specific lot.<\/p>\n

      \u010casto kladen\u00e9 ot\u00e1zky k objedn\u00e1vk\u00e1m obecn\u011b<\/h2>\n

      Jak\u00e1 je typick\u00e1 dodac\u00ed lh\u016fta?<\/h3>\n

      Standardn\u00ed skladov\u00e9 rozm\u011bry jsou obvykle odesl\u00e1ny do 10\u201360 dn\u016f v z\u00e1vislosti na temperu, mno\u017estv\u00ed a p\u0159\u00edpadn\u00e9m zak\u00e1zkov\u00e9m zpracov\u00e1n\u00ed. P\u0159esn\u00fd harmonogram potvr\u010fte s na\u0161\u00edm obchodn\u00edm t\u00fdmem p\u0159i vy\u017e\u00e1d\u00e1n\u00ed cenov\u00e9 nab\u00eddky.<\/p>\n

      M\u016f\u017eete dodat zak\u00e1zkov\u00e9 rozm\u011bry a tempery?<\/h3>\n

      Ano. \u0158e\u017eeme na d\u00e9lku, p\u00edl\u00edme a CNC obr\u00e1b\u00edme podle v\u00fdkresu a na vy\u017e\u00e1d\u00e1n\u00ed m\u016f\u017eeme zajistit specifick\u00e9 tempery. Uve\u010fte po\u017eadovan\u00e9 rozm\u011bry a tolerance v popt\u00e1vce.<\/p>\n

      Poskytujete hutn\u00ed certifik\u00e1ty?<\/h3>\n

      Hutn\u00ed certifik\u00e1t (MTC) je p\u0159ilo\u017een ke ka\u017ed\u00e9 objedn\u00e1vce. V p\u0159\u00edpad\u011b pot\u0159eby lze zajistit inspek\u010dn\u00ed zpr\u00e1vy SGS nebo jin\u00e9 t\u0159et\u00ed strany.<\/p>\n

      Jak\u00e9 povrchov\u00e9 \u00fapravy jsou k dispozici?<\/h3>\n

      Mezi b\u011b\u017en\u00e9 mo\u017enosti pat\u0159\u00ed povrch z v\u00e1lcovny, eloxov\u00e1n\u00ed a le\u0161t\u011bn\u00ed. Konkr\u00e9tn\u00ed povrchov\u00e9 \u00fapravy by m\u011bly b\u00fdt dohodnuty ve f\u00e1zi cenov\u00e9 nab\u00eddky.<\/p>","protected":false},"excerpt":{"rendered":"

      6201 aluminum alloy is a heat-treatable 6xxx series conductor grade combining good electrical conductivity with moderate strength and resistance to stress-corrosion cracking. Linsy supplies 6201 as wire, rod, and bar in T4, T6, and T81 tempers for busbars, conductor rails, and overhead line hardware. Custom sizes, cutting, and MTC documentation are available with every order.<\/p>\n

      \nDostupn\u00e9 formul\u00e1\u0159e:<\/strong> wire \/ rod \/ bar \/ sheet \/ coil \/ tube
      \nB\u011b\u017en\u00e9 typy povah:<\/strong> T4 \/ T6 \/ T81
      \nPodpora zpracov\u00e1n\u00ed:<\/strong> cutting \/ drawing \/ CNC machining \/ custom length
      \nDokumenty t\u00fdkaj\u00edc\u00ed se kvality:<\/strong> Protokol o zkou\u0161ce z materi\u00e1lu (MTC) s ka\u017edou objedn\u00e1vkou<\/p>","protected":false},"featured_media":9228,"template":"","meta":{"_seopress_titles_title":"6201 Aluminum Alloy | EN AW-6201 | ISO 9001","_seopress_titles_desc":"6201 aluminum alloy for busbar and conductor use. T4\/T6\/T81 wire, rod, and bar with custom sizes and MTC on every order.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[89],"product_tag":[],"class_list":["post-9203","product","type-product","status-publish","has-post-thumbnail","product_cat-6000-series-aluminum-alloys","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product\/9203","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/media\/9228"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/media?parent=9203"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product_brand?post=9203"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product_cat?post=9203"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/cs\/wp-json\/wp\/v2\/product_tag?post=9203"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}