{"id":9718,"date":"2026-01-06T12:00:15","date_gmt":"2026-01-06T12:00:15","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&p=9718"},"modified":"2026-07-08T15:01:16","modified_gmt":"2026-07-08T15:01:16","slug":"hlinikova-slitina-6064","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/cs\/produkt\/hlinikova-slitina-6064\/","title":{"rendered":"Hlin\u00edkov\u00e1 slitina 6064"},"content":{"rendered":"

What Is 6064 Aluminum Alloy?<\/h2>\n

6064 aluminum is a lead-free, free-machining 6000-series alloy developed as an environmentally friendlier alternative to 6262. By adding tin and bismuth to the magnesium-silicon base it produces short, manageable chips and holds a good surface finish during high-volume machining. Linsy supplies 6064 in T6 and T6511 tempers for automotive, fluid-power, and precision component production.<\/p>\n

Available 6064 Aluminum Products<\/h2>\n

6064 Aluminum Sheet & Coil<\/h3>\n\n\n\n\n
Formul\u00e1\u0159<\/th>\nTemperament<\/th>\nTlou\u0161\u0165ka (mm)<\/th>\n\u0160\u00ed\u0159ka (mm)<\/th>\nD\u00e9lka (mm)<\/th>\n<\/tr>\n
Plech \/ Svitek<\/td>\nT6, T651, T6511<\/td>\n0,5 \u2013 200<\/td>\n500 \u2013 2600<\/td>\n500 \u2013 12000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6064 Aluminum Tube<\/h3>\n\n\n\n\n
Formul\u00e1\u0159<\/th>\nTemperament<\/th>\nVn\u011bj\u0161\u00ed pr\u016fm\u011br (mm)<\/th>\nTlou\u0161\u0165ka st\u011bny (mm)<\/th>\nD\u00e9lka (mm)<\/th>\n<\/tr>\n
Trubka<\/td>\nT6, T651, T6511<\/td>\n6 \u2013 400<\/td>\n0,5 \u2013 40<\/td>\n1000 \u2013 12000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6064 Aluminum Bar<\/h3>\n\n\n\n\n
Formul\u00e1\u0159<\/th>\nTemperament<\/th>\nPr\u016fm\u011br (mm)<\/th>\nD\u00e9lka (mm)<\/th>\n<\/tr>\n
Ty\u010d (kulat\u00e1 \/ \u010dtvercov\u00e1 \/ ploch\u00e1)<\/td>\nT6, T651, T6511<\/td>\n6 \u2013 400<\/td>\n1000 \u2013 12000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

6064 Aluminum Wire<\/h3>\n\n\n\n\n
Formul\u00e1\u0159<\/th>\nTemperament<\/th>\nPr\u016fm\u011br (mm)<\/th>\nHmotnost svitku<\/th>\n<\/tr>\n
Dr\u00e1t \/ Ty\u010dinka<\/td>\nO, T6<\/td>\n0,8 \u2013 30<\/td>\nmin. 50 kg na svitek<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Rozm\u011bry lze p\u0159izp\u016fsobit. Sd\u011blte n\u00e1m po\u017eadovanou formu, temper a rozm\u011br a my potvrd\u00edme proveditelnost a tolerance.<\/p>\n

Specifikace a ekvivalentn\u00ed ozna\u010den\u00ed<\/h2>\n\n\n\n\n\n\n
Standardn\u00ed<\/th>\nOzna\u010den\u00ed<\/th>\n<\/tr>\n
AA \/ UNS<\/td>\n6064 \/ A96064<\/td>\n<\/tr>\n
CS<\/td>\nEN AW-6064 (AlMg1SiCuBi)<\/td>\n<\/tr>\n
B\u011b\u017en\u00e9 stavy<\/td>\nT6, T651, T6511 (also O)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Chemick\u00e9 slo\u017een\u00ed<\/h2>\n

Typical composition of 6064 is listed below. Bismuth and tin are present for free-machining performance; exact limits should be confirmed against the ordered specification.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Prvek<\/th>\nSlo\u017een\u00ed (hmot. %)<\/th>\n<\/tr>\n
Si<\/td>\n0.40 – 0.80<\/td>\n<\/tr>\n
Fe<\/td>\n0,70 max.<\/td>\n<\/tr>\n
Cu<\/td>\n0.15 – 0.40<\/td>\n<\/tr>\n
Mn<\/td>\n0,15 max<\/td>\n<\/tr>\n
Mg<\/td>\n0.80 – 1.20<\/td>\n<\/tr>\n
Cr<\/td>\n0,15 max<\/td>\n<\/tr>\n
Zn<\/td>\n0,25 max.<\/td>\n<\/tr>\n
Bi<\/td>\n0.40 – 0.70 (typical)<\/td>\n<\/tr>\n
Sn<\/td>\n0.10 – 0.30 (typical)<\/td>\n<\/tr>\n
Ti<\/td>\n0,10 max<\/td>\n<\/tr>\n
Ostatn\u00ed (ka\u017ed\u00fd)<\/td>\n0,05 max<\/td>\n<\/tr>\n
Ostatn\u00ed (celkem)<\/td>\n0,15 max<\/td>\n<\/tr>\n
Al<\/td>\nZbytek<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Mechanick\u00e9 vlastnosti podle zp\u016fsobu temperov\u00e1n\u00ed<\/h2>\n

Values below are typical minimums for extruded 6064 and reflect standard reference ranges; actual results vary with section thickness.<\/p>\n\n\n\n\n
Temperament<\/th>\nPevnost v tahu (MPa)<\/th>\nMez kluzu (MPa)<\/th>\nProdlou\u017een\u00ed (%, min)<\/th>\n<\/tr>\n
T6 \/ T6511<\/td>\n≥ 310<\/td>\n≥ 260<\/td>\n≥ 10<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Pr\u016fvodce v\u00fdb\u011brem tvrzenosti<\/h2>\n

T6 \/ T6511<\/strong> are the standard tempers for 6064, providing the high strength and stable machining behavior needed for valves, fittings, and fasteners. T6511 is the common extrusion temper; choose it unless a specific drawing calls for another condition. Annealed (O) stock is available where maximum formability is required before machining.<\/p>\n

Kl\u00ed\u010dov\u00e9 charakteristiky<\/h2>\n

Free-Machining Performance<\/h3>\n

Bismuth and tin promote short chip formation, improving tool life and surface finish in high-volume turning and milling.<\/p>\n

Odolnost proti korozi<\/h3>\n

6064 keeps good corrosion resistance for a free-machining alloy, suitable for fluid-power and automotive environments.<\/p>\n

Tva\u0159itelnost a sva\u0159itelnost<\/h3>\n

The alloy forms adequately in softer tempers but is primarily selected for machined parts. Welding is possible with standard methods; post-weld strength is lower than the base temper.<\/p>\n

Aplikace<\/h2>\n