{"id":2944,"date":"2024-06-01T02:47:24","date_gmt":"2024-06-01T02:47:24","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&p=2944"},"modified":"2026-07-08T15:01:11","modified_gmt":"2026-07-08T15:01:11","slug":"6060-aluminiumlegierung","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/de\/produkt\/6060-aluminiumlegierung\/","title":{"rendered":"6060 Aluminium-Legierung"},"content":{"rendered":"

What Is 6060 Aluminum?<\/h2>\n

6060 is a lower-strength member of the 6xxx (Al-Mg-Si) family, closely related to 6063 but with slightly tighter impurity control. Its main advantage is excellent extrudability and a smooth, bright finish after anodizing, which makes it the default choice for decorative and structural architectural profiles.<\/p>\n

Like other heat-treatable alloys, its strength comes from the magnesium-silicide precipitate formed during the T5\/T6 aging treatment. In the O temper it is soft and easy to bend; in T5\/T6 it reaches moderate structural strength.<\/p>\n

Available 6060 Aluminum Products<\/h2>\n

Extruded Profile & Tube<\/h3>\n

Custom cross-sections per drawing; typical section size 5\u2013400 mm, tube outer diameter 6\u2013300 mm, wall 0.5\u201320 mm, length up to 6000 mm (or coil for small sections).<\/p>\n

Sheet & Plate<\/h3>\n

Thickness 0.5\u2013150 mm, width 500\u20132600 mm, length 500\u201312000 mm. Sheet is typically 0.5\u20136 mm; plate 6\u2013150 mm.<\/p>\n

Bar<\/h3>\n

Round bar diameter 6\u2013400 mm, length up to 6000 mm; cut to size on request.<\/p>\n

Technische Daten und gleichwertige Bezeichnungen<\/h2>\n
\n\n\n\n\n\n\n
Bezeichnungssystem<\/th>\n\u00c4quivalent<\/th>\n<\/tr>\n<\/thead>\n
AA 6060<\/td>\nEN AW-6060<\/td>\n<\/tr>\n
UNS A96060<\/td>\nISO Al-MgSi0.5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Common standards:<\/strong> ASTM B221, EN 755, EN 12020, GB\/T 6892.<\/p>\n

Chemische Zusammensetzung<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Element<\/th>\nComposition (wt%)<\/th>\n<\/tr>\n<\/thead>\n
Si<\/td>\n0.30\u20130.60<\/td>\n<\/tr>\n
Fe<\/td>\n0.10\u20130.30<\/td>\n<\/tr>\n
Cu<\/td>\n0,10 max<\/td>\n<\/tr>\n
Mn<\/td>\n0,10 max<\/td>\n<\/tr>\n
Mg<\/td>\n0.35\u20130.60<\/td>\n<\/tr>\n
Cr<\/td>\n0,05 max<\/td>\n<\/tr>\n
Zn<\/td>\n0,15 max<\/td>\n<\/tr>\n
Ti<\/td>\n0,10 max<\/td>\n<\/tr>\n
Sonstige (jeweils)<\/td>\n0,05 max<\/td>\n<\/tr>\n
Sonstige (insgesamt)<\/td>\n0,15 max<\/td>\n<\/tr>\n
Al<\/td>\nBalance (remainder)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Mechanische Eigenschaften je nach Temperierung<\/h2>\n

Values below are typical for extruded or drawn product and should be confirmed against the mill test certificate for the specific temper and section.<\/p>\n

\n\n\n\n\n\n\n\n\n
Temperament<\/th>\nZugfestigkeit (MPa)<\/th>\nStreckgrenze (MPa)<\/th>\nDehnung (%)<\/th>\n<\/tr>\n<\/thead>\n
O<\/td>\n120<\/td>\n55<\/td>\n25<\/td>\n<\/tr>\n
T4<\/td>\n170<\/td>\n90<\/td>\n20<\/td>\n<\/tr>\n
T5<\/td>\n215<\/td>\n180<\/td>\n12<\/td>\n<\/tr>\n
T6<\/td>\n245<\/td>\n215<\/td>\n12<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Leitfaden zur Auswahl der H\u00e4rtung<\/h2>\n
    \n
  • O<\/strong> \u2014 soft, for bending and forming operations.<\/li>\n
  • T4<\/strong> \u2014 naturally aged; moderate strength with good formability.<\/li>\n
  • T5<\/strong> \u2014 cooled from extrusion and artificially aged; the most common architectural temper, good finish.<\/li>\n
  • T6<\/strong> \u2014 solution heat-treated and aged; highest strength of the common 6060 tempers.<\/li>\n<\/ul>\n

    Wesentliche Merkmale<\/h2>\n

    Extrudierbarkeit<\/h3>\n

    6060 flows well in the extrusion press, allowing thin walls and complex shapes at good press speed.<\/p>\n

    Surface Finish After Anodizing<\/h3>\n

    It produces a uniform, bright anodized layer, which is why it dominates window, door, and decorative trim.<\/p>\n

    Korrosionsbest\u00e4ndigkeit<\/h3>\n

    Good in atmospheric and mild industrial environments; suitable for indoor and most outdoor architectural use.<\/p>\n

    Schwei\u00dfeignung<\/h3>\n

    Readily welded by TIG\/MIG; post-weld strength in the heat-affected zone is lower than the parent T6, so design accordingly.<\/p>\n

    M\u00e4\u00dfige St\u00e4rke<\/h3>\n

    Enough for architectural and light structural roles, but not for highly loaded structural members (use 6061\/6082 instead).<\/p>\n

    Anwendungen<\/h2>\n
      \n
    • Window, door, and curtain-wall frames<\/li>\n
    • Railings, handrails, and balustrades<\/li>\n
    • Furniture tubing and decorative trim<\/li>\n
    • Lighting tracks and fixtures<\/li>\n
    • Transport interior profiles<\/li>\n<\/ul>\n

      Hinweise zur Bearbeitung und Oberfl\u00e4chenveredelung<\/h2>\n
        \n
      • Extrusion:<\/strong> primary production route; dies made to customer drawing.<\/li>\n
      • Eloxieren:<\/strong> clear or colored anodizing is the standard finish for 6060 trim.<\/li>\n
      • Pulverbeschichtung:<\/strong> available for color-matched architectural parts.<\/li>\n
      • Welding:<\/strong> TIG\/MIG with 4043 or 5356 filler; minimize heat input to protect the temper.<\/li>\n
      • Machining:<\/strong> fair machinability; use sharp tools and appropriate speeds for the T temper.<\/li>\n<\/ul>\n

        Qualit\u00e4tsdokumente und Qualit\u00e4tspr\u00fcfung<\/h2>\n
          \n
        • Werkstoffpr\u00fcfzeugnis (MTC)<\/strong> supplied with every order, per EN 10204 3.1 where requested.<\/li>\n
        • Dimension and visual inspection<\/strong> on each shipment; ultrasonic or eddy-current testing available on request.<\/li>\n
        • Third-party testing<\/strong> such as SGS can be arranged for composition and mechanical verification when required (SGS provides a test report, not a company certification).<\/li>\n
        • Management system:<\/strong> ISO 9001 (quality), ISO 14001 (environment), ISO 45001 (occupational health and safety) \u2014 no year suffix.<\/li>\n<\/ul>\n

          Why Choose Linsy for 6060 Aluminum<\/h2>\n
            \n
          • Two decades of extrusion and fabrication experience<\/strong> from our Shenzhen facility, serving the 1000\u20138000 series.<\/li>\n
          • Full processing chain<\/strong> \u2014 CNC machining, TIG\/MIG welding, laser cutting, anodizing, polishing, and powder coating handled in-house or with qualified partners.<\/li>\n
          • Documentation you can trust:<\/strong> MTC with every order and SGS test reports available on request.<\/li>\n
          • Cut-to-size and custom dimensions<\/strong> supported for most forms, with lead times typically 10\u201360 days depending on temper and quantity.<\/li>\n<\/ul>\n

            Weiterf\u00fchrende Ressourcen<\/h2>\n

            The following guides cover selection, temper comparison, and machining notes for this alloy. Confirm the live URLs before publishing \u2014 replace any external references with Linsy-owned blog links where available.<\/p>\n

              \n
            • 6060 Aluminium-Legierung: Ein umfassender Leitfaden<\/li>\n<\/ul>\n

              6060 Aluminum FAQ<\/h2>\n

              Is 6060 heat-treatable?<\/h3>\n

              Yes. 6060 is a heat-treatable 6xxx alloy; its strength develops through T5\/T6 aging.<\/p>\n

              6060 vs 6063 \u2014 which should I choose?<\/h3>\n

              They are very similar. 6063 is slightly more common for premium architectural anodizing; 6060 offers comparable finish with marginally different impurity limits. Either works for most trim.<\/p>\n

              Can 6060 be anodized?<\/h3>\n

              Yes, and it anodizes to a bright, even finish \u2014 this is its primary selling point.<\/p>\n

              What tempers are typically stocked?<\/h3>\n

              O, T4, T5, and T6. T5 and T6 dominate architectural extrusion.<\/p>\n

              Allgemeine Fragen zur Bestellung<\/h2>\n

              What is the minimum order quantity?<\/h3>\n

              MOQ depends on form and temper. Standard sections and tempers can start from a few hundred kilograms; custom-dimension or special-temper orders are reviewed case by case.<\/p>\n

              What is the typical lead time?<\/h3>\n

              For stock-available tempers, lead time is typically 10\u201330 days. Custom extrusion or heat-treated conditions may take up to 60 days. Confirm with our sales team at enquiry.<\/p>\n

              Can you supply cut-to-size and processing?<\/h3>\n

              Yes. We offer cutting, CNC machining, welding, anodizing, and polishing. Provide your drawings or dimension list with the enquiry.<\/p>\n

              What documents come with the shipment?<\/h3>\n

              Every order ships with an MTC. SGS or other third-party test reports can be arranged on request.<\/p>","protected":false},"excerpt":{"rendered":"

              6060 aluminum is a heat-treatable Al-Mg-Si alloy widely used for architectural extrusions where a clean surface after anodizing matters. It offers moderate strength, good corrosion resistance, and easy fabrication.<\/p>\n

              \nVerf\u00fcgbare Formulare:<\/strong> sheet \/ plate \/ extruded profile \/ bar \/ tube
              \nH\u00e4ufige Temperamente:<\/strong> O \/ T4 \/ T5 \/ T6
              \nUnterst\u00fctzung bei der Bearbeitung:<\/strong> CNC machining \/ cutting \/ anodizing \/ powder coating
              \nQualit\u00e4tsdokumente:<\/strong> MTC-Bericht bei jeder Bestellung<\/p>","protected":false},"featured_media":4719,"template":"","meta":{"_seopress_titles_title":"6060 Aluminum Supplier | EN AW-6060 | ISO 9001","_seopress_titles_desc":"Linsy supplies 6060 aluminum sheet, plate, extrusion, bar and tube for architecture and transport. EN AW-6060 equivalent, MTC per order, ISO 9001.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[89],"product_tag":[],"class_list":["post-2944","product","type-product","status-publish","has-post-thumbnail","product_cat-6000-series-aluminum-alloys","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/de\/wp-json\/wp\/v2\/product\/2944","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/de\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/de\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/de\/wp-json\/wp\/v2\/media\/4719"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/de\/wp-json\/wp\/v2\/media?parent=2944"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/de\/wp-json\/wp\/v2\/product_brand?post=2944"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/de\/wp-json\/wp\/v2\/product_cat?post=2944"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/de\/wp-json\/wp\/v2\/product_tag?post=2944"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}