6082 aluminum wire (EN AW-6082, AlSi1MgMn) is a heat-treatable 6000-series wire valued for its strength, corrosion resistance, and good fatigue performance. With added manganese, it holds structural integrity better than 6061 in demanding applications, and is commonly drawn in O, T4, T6, and T651 tempers.<\/p>\n
It serves as welding wire, rivets, fasteners, and feedstock for stressed structural components where a light, strong, and weldable material is required.<\/p>\n
| Formulario<\/th>\n | Temperamentos comunes<\/th>\n | Typical Size Range<\/th>\n<\/tr>\n<\/thead>\n | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wire (drawn)<\/td>\n | O, T4, T6, T651<\/td>\n | Diameter 0.8\u201330 mm<\/td>\n<\/tr>\n | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Spool \/ Coil<\/td>\n | O, T4, T6, T651<\/td>\n | Min 50 kg per coil; tolerance per spec<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Wire is supplied on spools or coils with a minimum of 50 kg per coil. Diameter tolerance follows the agreed specification (for example ASTM B211 or EN 755-2). Custom diameters and tempers can be discussed at order.<\/p>\n 6082 Wire Specifications & Equivalent Designations<\/h2>\n
|
Higher manganese gives 6082 strong performance in cyclic-load applications versus 6061.<\/p>\n
Good in atmospheric and many industrial environments.<\/p>\n
Suitable as welding wire with compatible filler; produces sound joints for structural assemblies.<\/p>\n
6082 machines well in the soft (O) and solution-heat-treated tempers; T6\/T651 tempers are stronger and can work-harden at the cutting edge, so sharp tooling and appropriate feeds are recommended.<\/p>\n
6082 is generally weldable using TIG or MIG processes with matching or 4043\/5356 filler, depending on the service requirement. Welded zones lose some strength compared with the base temper \u2014 design accordingly for structural use.<\/p>\n
Forming is best done in the O or T4 condition. Final strength is developed by the specified temper; do not re-heat-treat without confirming the alloy’s response.<\/p>\n
Common finishes include anodizing, polishing, and powder coating. Anodizing quality depends on surface preparation, so confirm finish requirements before production.<\/p>\n
Every 6082 wire order ships with an MTC reporting chemical composition and mechanical properties. Third-party SGS reports can be arranged on request. Confirm the required standard (ASTM, EN, GB) when ordering.<\/p>\n
Linsy operates a Shenzhen production base with over 20 years of experience supplying aluminum semis to global B2B buyers. We handle the 1000 through 8000 series and support both standard stock sizes and made-to-order dimensions.<\/p>\n