{"id":9038,"date":"2025-09-01T01:57:36","date_gmt":"2025-09-01T01:57:36","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&#038;p=9038"},"modified":"2026-11-18T06:02:02","modified_gmt":"2026-11-18T06:02:02","slug":"barre-carree-en-aluminium-2024","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/fr\/product\/2024-aluminum-square-bar\/","title":{"rendered":"Barre carr\u00e9e en aluminium 2024-O\/T3\/T4\/T351\/T851"},"content":{"rendered":"<h2>Qu'est-ce que la barre carr\u00e9e en aluminium 2024 ?<\/h2>\n<p>2024 aluminum square bar is solid square stock in heat-treatable Al-Cu-Mg, the aerospace structural alloy, used for square parts under repeated load rather than a single peak: fittings, ribs, keys in fatigue-critical assemblies, machine components where the stress cycles. Where 7075 wins on absolute strength, 2024 wins on fatigue life. Two limits decide most jobs: bare 2024 corrodes readily and needs anodizing, coating or cladding, and it is not reliably weldable. Alloy data: <a href=\"https:\/\/premiumalu.com\/fr\/produit\/alliage-daluminium-2024\/\">Alliage d'aluminium 2024<\/a>.<\/p>\n<h2>Gamme de dimensions \u2014 C\u00f4t\u00e9 et longueur<\/h2>\n<table>\n<tr>\n<th>\u00c9l\u00e9ment<\/th>\n<th>Plage<\/th>\n<\/tr>\n<tr>\n<td>Longueur du c\u00f4t\u00e9<\/td>\n<td>6 &ndash; 150 mm (custom to 300 mm)<\/td>\n<\/tr>\n<tr>\n<td>Longueur<\/td>\n<td>1 000 \u2013 6 000 mm, coupe sur mesure<\/td>\n<\/tr>\n<tr>\n<td>\u00c9tats<\/td>\n<td>O \/ T3 \/ T4 \/ T351 \/ T851<\/td>\n<\/tr>\n<tr>\n<td>Normes<\/td>\n<td>ASTM B211 (bar and rod), ASTM B221<\/td>\n<\/tr>\n<\/table>\n<p><strong>Sur la d\u00e9signation.<\/strong> T351 and T851 are stress-relieved tempers produced by stretching, and on a sawn solid bar they are legitimate &mdash; which is where square bar differs from tube. Smaller square bar is drawn or extruded and carries T3 or T4. Tell us the side and we will confirm which route and designation apply.<\/p>\n<h2>Revenus et propri\u00e9t\u00e9s m\u00e9caniques<\/h2>\n<table>\n<tr>\n<th>Temp\u00e9rer<\/th>\n<th>R\u00e9sistance \u00e0 la traction (MPa)<\/th>\n<th>Limite d'\u00e9lasticit\u00e9 (MPa)<\/th>\n<th>\u00c9longation<\/th>\n<th>Fatigue (MPa)<\/th>\n<\/tr>\n<tr>\n<td>O<\/td>\n<td>186<\/td>\n<td>76<\/td>\n<td>20%<\/td>\n<td>90<\/td>\n<\/tr>\n<tr>\n<td>T3<\/td>\n<td>483<\/td>\n<td>345<\/td>\n<td>18%<\/td>\n<td>138<\/td>\n<\/tr>\n<tr>\n<td>T4<\/td>\n<td>462<\/td>\n<td>324<\/td>\n<td>17%<\/td>\n<td>138<\/td>\n<\/tr>\n<tr>\n<td>T351<\/td>\n<td>462<\/td>\n<td>324<\/td>\n<td>17%<\/td>\n<td>138<\/td>\n<\/tr>\n<tr>\n<td>T851<\/td>\n<td>517<\/td>\n<td>455<\/td>\n<td>7%<\/td>\n<td>159<\/td>\n<\/tr>\n<\/table>\n<p>Typical AA reference figures; confirm against the MTC. Density 2.78 g\/cm&sup3;, elastic modulus 73 GPa. Fatigue strength barely moves across tempers while elongation collapses from 17% at T351 to 7% at T851 &mdash; on a keyed or threaded part, that ductility is what prevents a brittle failure at the corner.<\/p>\n<h2>Quel \u00e9tat \u2014 T351, T3 ou T851<\/h2>\n<p><strong>T351 est l'\u00e9tat d'usinage<\/strong> on plate-sawn bar: stretched after quenching, so it stays straight when cut. <strong>T3<\/strong> keeps the cold work and is slightly stronger (483 against 462 MPa) &mdash; appropriate for smaller drawn bar worked in one operation. <strong>T851<\/strong> is for higher strength at temperature, at the cost of ductility; do not use it where the part is keyed or threaded.<\/p>\n<h2>2024 vs 7075 vs 6061 Square Bar<\/h2>\n<table>\n<tr>\n<th>Alliage \/ \u00e9tat m\u00e9tallurgique<\/th>\n<th>R\u00e9sistance \u00e0 la traction (MPa)<\/th>\n<th>Limite d'\u00e9lasticit\u00e9 (MPa)<\/th>\n<th>Fatigue<\/th>\n<th>O\u00f9 il s'inscrit<\/th>\n<\/tr>\n<tr>\n<td><strong>2024-T351<\/strong><\/td>\n<td>462<\/td>\n<td>324<\/td>\n<td>Meilleur de sa cat\u00e9gorie<\/td>\n<td>Fatigue-critical fittings, ribs, keys in cycled assemblies<\/td>\n<\/tr>\n<tr>\n<td>7075-T651<\/td>\n<td>570<\/td>\n<td>505<\/td>\n<td>Plus bas<\/td>\n<td>Peak strength, wear blocks, tooling<\/td>\n<\/tr>\n<tr>\n<td>6061-T6511<\/td>\n<td>310<\/td>\n<td>276<\/td>\n<td>Mod\u00e9r\u00e9<\/td>\n<td>Machine parts, spacers, tapped posts<\/td>\n<\/tr>\n<\/table>\n<p><strong>Le 7075 est plus r\u00e9sistant, le 2024 dure plus longtemps sous charge cyclique<\/strong> &mdash; a part that sees many cycles should be specified on fatigue data, not tensile strength. Neither should be welded and both need protection; if the part is welded or left bare outdoors, 6061 is the answer.<\/p>\n<h2>Barre massive, tube carr\u00e9 \u2014 et fili\u00e8re<\/h2>\n<p><strong>Massif versus tube :<\/strong> tube gives more stiffness per kilogram but has no wall to hold a thread or a keyway. A keyed or tapped square part must be solid.<\/p>\n<p><strong>Itin\u00e9raire :<\/strong> small square bar is drawn or extruded (T3\/T4); larger sizes are sawn from stretched plate (T351\/T851). That is why the temper list on this page spans both &mdash; and why the route has to be confirmed before the certificate is written.<\/p>\n<h2>D\u00e9coupe, usinage et \u00e9tat des bords<\/h2>\n<p><strong>D\u00e9coupe :<\/strong> sawn to length; sawn edges are square and can be milled on request.<\/p>\n<p>On the fatigue question specifically: a keyway or a cross-hole in a 2024 square bar is a stress concentration, and the fatigue strength figures quoted above are for smooth specimens. In practice the notch halves them or worse. If the part is cyclically loaded and has a keyway, either design the fillet radius generously or move up to a larger section &mdash; adding material is usually cheaper than changing alloy and rarely as effective as reducing the notch.<\/p>\n<p><strong>Usinage :<\/strong> good, better than 7075 on long-chipping operations, but 2024 makes stringy chips that wrap &mdash; use inserts with a chip breaker and keep coolant flowing. Order T351 so the bar does not relieve stress during machining.<\/p>\n<p><strong>Finition \u2014 le point faible.<\/strong> Bare 2024 corrodes in damp air and cut edges go first. Specify anodizing (it darkens, and protects less than on 6xxx), a conversion coating, or paint &mdash; decided at quotation, not after machining.<\/p>\n<p><strong>Soudage :<\/strong> not recommended. Fusion welding hot-cracks and loses properties in the heat-affected zone.<\/p>\n<h2>Applications<\/h2>\n<p>Aircraft fittings and ribs, fatigue-loaded machine components, keys and splines in cycled assemblies, structural fittings, hydraulic components, racing and motorsport parts, high-load jigs where fatigue governs.<\/p>\n<h2>Documents qualit\u00e9 et comment sp\u00e9cifier<\/h2>\n<p>Every order ships with an MTC reporting alloy, temper, side and mechanical results against ASTM B211 or B221. Third-party testing is available on request at additional cost; production runs under ISO 9001, ISO 14001 and ISO 45001 certified systems.<\/p>\n<p>Pour obtenir un devis en un seul \u00e9change, envoyez : <strong>c\u00f4t\u00e9 \u00d7 longueur<\/strong>, <strong>revenu<\/strong> (T351 for machined parts, T3 for small sections), <strong>fatigue requirement<\/strong> if the part is cyclically loaded, <strong>protection contre la corrosion<\/strong>, <strong>finition des extr\u00e9mit\u00e9s<\/strong>, et la <strong>destination<\/strong>.<\/p>\n<h2>Pourquoi choisir Linsy<\/h2>\n<p>Usine d'aluminium bas\u00e9e \u00e0 Shenzhen, plus de 20 ans d'exp\u00e9rience dans le secteur, fournissant des alliages des s\u00e9ries 1000 \u00e0 8000 en sp\u00e9cifications standard et en dimensions sur mesure.<\/p>\n<ul>\n<li>MTC avec chaque commande, indiquant dimension et \u00e9tat m\u00e9tallurgique<\/li>\n<li>2024 square bar 6&ndash;150 mm side (custom to 300 mm)<\/li>\n<li>Extruded and plate-sawn routes, designation confirmed on the quotation<\/li>\n<li>Anodizing and coating arranged with the material<\/li>\n<li>Tests SGS sur demande ; commandes multi-sp\u00e9cifications et de projet trait\u00e9es comme une seule commande<\/li>\n<\/ul>\n<h2>Ressources connexes<\/h2>\n<ul>\n<li><a href=\"https:\/\/premiumalu.com\/fr\/produit\/barre-ronde-en-aluminium-2024\/\">Barre ronde en aluminium 2024<\/a> et <a href=\"https:\/\/premiumalu.com\/fr\/produit\/tube-carre-en-aluminium-2024\/\">et le tube carr\u00e9<\/a><\/li>\n<li><a href=\"https:\/\/premiumalu.com\/fr\/produit\/barre-carree-en-aluminium-7075\/\">Barre carr\u00e9e en aluminium 7075<\/a> \u2014 lorsque la r\u00e9sistance de pointe est d\u00e9terminante<\/li>\n<li><a href=\"https:\/\/premiumalu.com\/fr\/produit\/barre-carree-en-aluminium-6061\/\">Barre carr\u00e9e en aluminium 6061<\/a> \u2014 soudable et r\u00e9sistant \u00e0 la corrosion<\/li>\n<li><a href=\"https:\/\/premiumalu.com\/fr\/2024-vs-7075-comparaison-complete-et-approfondie\/\">Comparaison 2024 vs 7075<\/a><\/li>\n<\/ul>\n<h2>FAQ sur la barre carr\u00e9e en aluminium 2024<\/h2>\n<p><strong>Q: 2024 or 7075 square bar?<\/strong><br \/>A: 7075 is stronger (570 against 462 MPa); 2024 has better fatigue resistance, which is what governs a cyclically loaded part.<\/p>\n<p><strong>Q: Does 2024 square bar need corrosion protection?<\/strong><br \/>A: Yes. Bare 2024 corrodes readily and cut edges go first. Specify anodizing, a conversion coating or paint at quotation.<\/p>\n<p><strong>Q: Can 2024 square bar be welded?<\/strong><br \/>A: No, not reliably. It hot-cracks and loses properties in the heat-affected zone. Design for mechanical fastening.<\/p>\n<p><strong>Q: Why does the temper list include T351 and T851?<\/strong><br \/>A: Because large square bar is sawn from stretched plate, where those are the correct designations. Smaller bar is drawn and carries T3 or T4.<\/p>\n<p><strong>Q : Quelles dimensions fournissez-vous ?<\/strong><br \/>A: 6&ndash;150 mm side as standard, custom to 300 mm, cut to length from 1,000 to 6,000 mm.<\/p>","protected":false},"excerpt":{"rendered":"<p>2024 aluminum square bar is solid square stock in Al-Cu-Mg, the aerospace structural alloy, for square parts under repeated load. Where 7075 wins on strength, 2024 wins on fatigue life. Not weldable, and bare 2024 needs protection &mdash; both facts belong on the drawing.<\/p>\n<p><strong>C\u00f4t\u00e9 :<\/strong> 6&ndash;150 mm (custom to 300 mm)<br \/><strong>Longueur :<\/strong> 1 000\u20136 000 mm<br \/><strong>Revenus :<\/strong> O \/ T3 \/ T4 \/ T351 \/ T851<br \/><strong>Normes :<\/strong> ASTM B211, ASTM B221<br \/><strong>Documents relatifs \u00e0 la qualit\u00e9 :<\/strong> Rapport MTC joint \u00e0 chaque commande<\/p>","protected":false},"featured_media":9071,"template":"","meta":{"_seopress_titles_title":"2024 Aluminum Square Bar Supplier | T3 T4 T351 T851 | Linsy","_seopress_titles_desc":"2024 aluminum square bar in T3, T4, T351 and T851 tempers, 6-150 mm side. Fatigue-critical aerospace stock, cut to size, MTC with every order.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[193],"product_tag":[],"class_list":["post-9038","product","type-product","status-publish","has-post-thumbnail","product_cat-aluminum-square-bar","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product\/9038","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/media\/9071"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/media?parent=9038"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product_brand?post=9038"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product_cat?post=9038"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product_tag?post=9038"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}