{"id":9846,"date":"2026-02-02T12:09:45","date_gmt":"2026-02-02T12:09:45","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&#038;p=9846"},"modified":"2026-07-07T08:32:48","modified_gmt":"2026-07-07T08:32:48","slug":"2a11-aluminum-alloy","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/fr\/produit\/2a11-aluminum-alloy\/","title":{"rendered":"Alliage d'aluminium 2A11"},"content":{"rendered":"<h2>What Is 2A11 Aluminum Alloy?<\/h2>\n<p>2A11 aluminum alloy is a Chinese GB\/T 3190 designation for a high-strength Al-Cu-Mg wrought aluminum alloy, commonly referred to as &#8220;hard aluminum&#8221; (\u786c\u94dd) in Chinese industrial contexts. It is the GB equivalent of the internationally recognized AA 2017 alloy (AlCu4SiMg), though the two are covered under different national standards and may have slightly different certification scopes.<\/p>\n<p>2A11 is primarily alloyed with copper (3.8\u20134.5%), magnesium (0.4\u20130.8%), and manganese (0.4\u20130.8%), with silicon kept below 0.5%. The copper content provides high tensile strength through precipitation hardening, while magnesium and manganese contribute to additional strength and workability. In the T4 temper (solution heat-treated and naturally aged), 2A11 typically achieves tensile strength exceeding 370 MPa, making it one of the strongest aluminum alloys in the 2000 series for general engineering applications.<\/p>\n<p>A key characteristic of 2A11 is its excellent cold workability in the T4 condition, which makes it the preferred material for aircraft rivets and cold-formed fasteners. It also offers good machinability, especially in the T6 temper. However, like other Al-Cu alloys, 2A11 has relatively poor corrosion resistance compared to 5xxx and 6xxx series alloys, and is not recommended for welding by conventional arc methods due to susceptibility to hot cracking.<\/p>\n<p>2A11 is covered under GB\/T 3190 (China), and is commonly supplied in accordance with internal enterprise specifications aligned with GB standards. For procurement reference, buyers often compare 2A11 with AA 2017 (UNS A92017, EN AW-2017 \/ AlCu4MgSi).<\/p>\n<h2>Available 2A11 Aluminum Products<\/h2>\n<p>Linsy supplies 2A11 aluminum alloy in a range of standard and custom product forms. Length, width, diameter, and dimensional tolerances can be tailored to your project requirements. If your specification is not listed below, please contact our sales team for a custom quotation.<\/p>\n<h3>2A11 Aluminum Sheet &amp; Coil<\/h3>\n<table>\n<thead>\n<tr>\n<th>Formulaire<\/th>\n<th>Temp\u00e9rer<\/th>\n<th>\u00c9paisseur (mm)<\/th>\n<th>Largeur (mm)<\/th>\n<th>Longueur (mm)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>2A11 Sheet \/ Coil<\/td>\n<td>O, T4, T6<\/td>\n<td>0.3 \u2013 6.0<\/td>\n<td>500 \u2013 2600<\/td>\n<td>500 \u2013 16000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>2A11 Aluminum Plate<\/h3>\n<table>\n<thead>\n<tr>\n<th>Formulaire<\/th>\n<th>Temp\u00e9rer<\/th>\n<th>\u00c9paisseur (mm)<\/th>\n<th>Largeur (mm)<\/th>\n<th>Longueur (mm)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>2A11 Plate<\/td>\n<td>O, T4, T6<\/td>\n<td>6.0 \u2013 80<\/td>\n<td>500 \u2013 2600<\/td>\n<td>500 \u2013 16000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>2A11 Aluminum Bar<\/h3>\n<table>\n<thead>\n<tr>\n<th>Formulaire<\/th>\n<th>Temp\u00e9rer<\/th>\n<th>Diam\u00e8tre (mm)<\/th>\n<th>Longueur (mm)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>2A11 Round Bar<\/td>\n<td>O, T4, T6<\/td>\n<td>6 \u2013 300<\/td>\n<td>500 \u2013 6000<\/td>\n<\/tr>\n<tr>\n<td>2A11 Square \/ Flat Bar<\/td>\n<td>O, T4, T6<\/td>\n<td>6 \u2013 200<\/td>\n<td>500 \u2013 6000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>2A11 Aluminum Tube<\/h3>\n<table>\n<thead>\n<tr>\n<th>Formulaire<\/th>\n<th>Temp\u00e9rer<\/th>\n<th>Diam\u00e8tre ext\u00e9rieur (mm)<\/th>\n<th>\u00c9paisseur de la paroi (mm)<\/th>\n<th>Longueur (mm)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>2A11 Round Tube<\/td>\n<td>O, T4, T6<\/td>\n<td>10 \u2013 300<\/td>\n<td>1 \u2013 20<\/td>\n<td>500 \u2013 6000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><em>Note: Length, width, diameter, and wall thickness can be customized. Please provide your drawing or specification for a tailored quotation.<\/em><\/p>\n<h2>2A11 Aluminum Specifications &amp; Equivalent Designations<\/h2>\n<table>\n<thead>\n<tr>\n<th>Standard<\/th>\n<th>D\u00e9signation<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>China (GB\/T 3190)<\/td>\n<td>2A11<\/td>\n<\/tr>\n<tr>\n<td>AA (UNS)<\/td>\n<td>2017 (A92017) \u2014 approximate equivalent<\/td>\n<\/tr>\n<tr>\n<td>European (EN 573-3)<\/td>\n<td>EN AW-2017 \/ AlCu4MgSi \u2014 approximate equivalent<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><em>Note: 2A11 is a Chinese GB designation. AA 2017 (AlCu4MgSi) is the closest international equivalent, but mechanical property certification and dimensional tolerances are issued under GB standards for 2A11 supply.<\/em><\/p>\n<h2>Chemical Composition of 2A11 Aluminum (GB\/T 3190)<\/h2>\n<table>\n<thead>\n<tr>\n<th>\u00c9l\u00e9ment<\/th>\n<th>Contenu (%)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Silicium (Si)<\/td>\n<td>\u2264 0.50<\/td>\n<\/tr>\n<tr>\n<td>Fer (Fe)<\/td>\n<td>\u2264 0.40<\/td>\n<\/tr>\n<tr>\n<td>Cuivre (Cu)<\/td>\n<td>3.8 \u2013 4.5<\/td>\n<\/tr>\n<tr>\n<td>Mangan\u00e8se (Mn)<\/td>\n<td>0.4 - 0.8<\/td>\n<\/tr>\n<tr>\n<td>Magn\u00e9sium (Mg)<\/td>\n<td>0.4 - 0.8<\/td>\n<\/tr>\n<tr>\n<td>Zinc (Zn)<\/td>\n<td>\u2264 0.30<\/td>\n<\/tr>\n<tr>\n<td>Other Elements (Each)<\/td>\n<td>\u2264 0.05<\/td>\n<\/tr>\n<tr>\n<td>Other Elements (Total)<\/td>\n<td>\u2264 0.15<\/td>\n<\/tr>\n<tr>\n<td>Aluminium (Al)<\/td>\n<td>\u00c9quilibre<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Propri\u00e9t\u00e9s m\u00e9caniques selon le traitement thermique<\/h2>\n<table>\n<thead>\n<tr>\n<th>Temp\u00e9rer<\/th>\n<th>R\u00e9sistance \u00e0 la traction (MPa)<\/th>\n<th>Limite d'\u00e9lasticit\u00e9 (MPa)<\/th>\n<th>\u00c9longation (%)<\/th>\n<th>Utilisation typique<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>O<\/td>\n<td>\u2264 245<\/td>\n<td>\u2264 125<\/td>\n<td>\u2265 12<\/td>\n<td>Forming, bending<\/td>\n<\/tr>\n<tr>\n<td>T4<\/td>\n<td>\u2265 370<\/td>\n<td>\u2265 215<\/td>\n<td>\u2265 10<\/td>\n<td>Rivets, fasteners, cold-formed parts<\/td>\n<\/tr>\n<tr>\n<td>T6<\/td>\n<td>\u2265 390<\/td>\n<td>\u2265 245<\/td>\n<td>\u2265 8<\/td>\n<td>High-stress structural components<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><em>Values are typical for GB\/T 3190 2A11 products. Actual values may vary by product form and thickness. MTC reports are provided with every order.<\/em><\/p>\n<h2>Guide de s\u00e9lection des temp\u00e9raments<\/h2>\n<table>\n<thead>\n<tr>\n<th>Temp\u00e9rer<\/th>\n<th>Caract\u00e9ristiques principales<\/th>\n<th>Meilleur pour<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>O (recuit)<\/td>\n<td>Softest condition, highest formability, lowest strength<\/td>\n<td>Cold forming, bending, parts requiring complex shaping before heat treatment<\/td>\n<\/tr>\n<tr>\n<td>T4<\/td>\n<td>Solution heat-treated and naturally aged; excellent strength with good cold workability<\/td>\n<td>Aircraft rivets, cold-formed fasteners, precision mechanical parts<\/td>\n<\/tr>\n<tr>\n<td>T6<\/td>\n<td>Solution heat-treated and artificially aged; highest strength<\/td>\n<td>High-stress structural components, gears, bushings, heavy-duty fasteners<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Key Characteristics of 2A11 Aluminum Alloy<\/h2>\n<h3>Haute r\u00e9sistance<\/h3>\n<p>2A11 achieves tensile strength exceeding 370 MPa in the T4 temper and over 390 MPa in T6, making it suitable for structural applications where weight savings are critical.<\/p>\n<h3>Bonne r\u00e9sistance \u00e0 la fatigue<\/h3>\n<p>The alloy performs well under cyclic loading, which is essential for aerospace fasteners and dynamic-load components.<\/p>\n<h3>Excellente usinabilit\u00e9<\/h3>\n<p>In the T6 temper, 2A11 machines cleanly with good surface finish, making it suitable for automatic screw machine products and precision parts.<\/p>\n<h3>Good Cold Workability (T4 Condition)<\/h3>\n<p>Unlike many high-strength aluminum alloys, 2A11 in T4 condition can be cold-formed and bent without intermediate annealing, which is the reason it is the preferred material for aircraft rivets.<\/p>\n<h3>Corrosion Resistance &amp; Protection<\/h3>\n<p>2A11 has relatively poor corrosion resistance due to its high copper content. For outdoor or corrosive environments, consider Alclad 2A11 (not always available) or apply protective surface treatments such as anodizing or painting. For mating with dissimilar metals, use appropriate insulation to prevent galvanic corrosion.<\/p>\n<h2>Common Applications of 2A11 Aluminum Alloy<\/h2>\n<table>\n<thead>\n<tr>\n<th>Industry \/ Sector<\/th>\n<th>Applications typiques<\/th>\n<th>Why 2A11 Is Used<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>A\u00e9rospatiale<\/td>\n<td>Aircraft rivets, structural fasteners, brackets<\/td>\n<td>High strength-to-weight ratio, good fatigue resistance, excellent cold workability in T4<\/td>\n<\/tr>\n<tr>\n<td>Automobile<\/td>\n<td>High-stress bolts, fasteners, precision machined parts<\/td>\n<td>High strength, good machinability in T6<\/td>\n<\/tr>\n<tr>\n<td>Ing\u00e9nierie de pr\u00e9cision<\/td>\n<td>Gears, bushings, camera components, optical instrument parts<\/td>\n<td>Dimensional stability, good machinability, attractive machined finish<\/td>\n<\/tr>\n<tr>\n<td>General Engineering<\/td>\n<td>Automatic screw machine products, bushings, wear plates<\/td>\n<td>Consistent mechanical properties, readily available in bar form<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Remarques concernant le traitement et la finition de surface<\/h2>\n<ul>\n<li><strong>Usinage :<\/strong> 2A11 has excellent machinability in T6 and T4 tempers. It produces small, manageable chips and accepts high cutting speeds. Use sharp carbide tooling for best results.<\/li>\n<li><strong>Formation :<\/strong> In the O temper, 2A11 can be cold-formed. In T4 condition, limited cold working is possible without intermediate annealing. T6 parts are generally not cold-formed due to high strength.<\/li>\n<li><strong>Soudage :<\/strong> 2A11 is not recommended for welding by conventional arc welding (TIG\/MIG) due to susceptibility to hot cracking in the heat-affected zone and significant strength loss. For joined assemblies, mechanical fastening (rivets, bolts) is preferred. Friction stir welding may be feasible for specialized applications \u2014 please consult our technical team.<\/li>\n<li><strong>Heat Treatment:<\/strong> 2A11 is a heat-treatable alloy. T4 is achieved by solution heat treatment followed by natural aging. T6 uses artificial aging. Proper heat treatment is critical to achieving specified mechanical properties.<\/li>\n<li><strong>Finition de surface :<\/strong> Anodizing (including hard anodizing with appropriate pretreatments), polishing, and painting are all supported. Note that the copper-rich composition may result in a darker or less uniform anodized appearance compared to 6xxx series alloys.<\/li>\n<\/ul>\n<h2>Documents relatifs \u00e0 la qualit\u00e9 et contr\u00f4le qualit\u00e9<\/h2>\n<p>Linsy provides the following quality documents and inspection support for 2A11 aluminum alloy orders:<\/p>\n<ul>\n<li><strong>MTC (Mill Test Certificate):<\/strong> Issued for every order, reporting actual chemical composition and mechanical properties of the supplied batch.<\/li>\n<li><strong>Dimensional inspection report:<\/strong> Available on request for precision-tolerance orders.<\/li>\n<li><strong>SGS test reports:<\/strong> Available on request with additional testing cost. Common reports include chemical composition verification, mechanical properties testing, ultrasonic testing (for thick plates), and RoHS + REACH compliance.<\/li>\n<li><strong>Traceability:<\/strong> All materials are fully traceable to the original cast batch.<\/li>\n<\/ul>\n<h2>Why Choose Linsy for 2A11 Aluminum Alloy<\/h2>\n<p>Linsy Aluminum is a Shenzhen-based aluminum factory with more than 20 years of industry experience. We specialize in supplying a full range of aluminum alloys across the 1000\u20138000 series, including Chinese GB specifications such as 2A11 that are often harder to source through standard international suppliers.<\/p>\n<p>Our advantages for 2A11 aluminum alloy sourcing include:<\/p>\n<ul>\n<li><strong>GB specification expertise:<\/strong> We regularly supply GB\/T 3190 alloys (2A11, 2A12, 2A14, etc.) to buyers who require Chinese standard materials for domestic or export projects.<\/li>\n<li><strong>Flexible order sizes:<\/strong> In addition to standard in-stock sizes, we support low-MOQ custom production for non-stock items, with typical lead time of 10\u201360 days depending on alloy, dimensions, and processing requirements.<\/li>\n<li><strong>In-house processing:<\/strong> Our facility supports CNC machining, laser cutting, TIG and MIG welding (for appropriate alloys), anodizing, polishing, and protective film application \u2014 allowing you to source finished or semi-finished components, not just raw material.<\/li>\n<li><strong>Certified quality system:<\/strong> Linsy operates under ISO 9001, ISO 14001, and ISO 45001 certified management systems. MTC reports are provided with every order.<\/li>\n<li><strong>Global shipping experience:<\/strong> We regularly ship aluminum products to the United States, Europe, Japan, South Korea, and other international markets, with proper export packaging and documentation.<\/li>\n<\/ul>\n<h2>Ressources connexes<\/h2>\n<p>Learn more about 2000 series aluminum alloys and selection guidance:<\/p>\n<ul>\n<li><a href=\"https:\/\/premiumalu.com\/fr\/mastering-2014-alloy-your-ultimate-guide\/\">Tout ce que vous devez savoir sur l'alliage d'aluminium 2014<\/a><\/li>\n<\/ul>\n<h2>2A11 Aluminum Alloy FAQ<\/h2>\n<dl>\n<dt>What is 2A11 aluminum alloy used for?<\/dt>\n<dd>2A11 is primarily used for aircraft rivets, structural fasteners, precision machined parts, gears, bushings, and automatic screw machine products. Its combination of high strength and good cold workability in T4 makes it the preferred choice for cold-formed rivets.<\/dd>\n<dt>Is 2A11 the same as AA 2017?<\/dt>\n<dd>2A11 (GB\/T 3190, China) and AA 2017 (UNS A92017, USA) have very similar chemical composition and mechanical properties, but they are covered under different national standards. When sourcing, confirm which standard your project requires. Linsy can supply 2A11 with GB-standard MTC, and can advise on equivalency for your application.<\/dd>\n<dt>What tempers does Linsy supply for 2A11 aluminum?<\/dt>\n<dd>We commonly supply 2A11 in O, T4, and T6 tempers. T4 is the most popular for rivets and cold-formed fasteners. T6 is used for high-stress structural parts requiring maximum strength. O temper is available for forming operations prior to heat treatment.<\/dd>\n<dt>Can 2A11 aluminum be welded?<\/dt>\n<dd>Conventional arc welding (TIG\/MIG) is not recommended for 2A11 due to hot cracking susceptibility and strength loss in the heat-affected zone. Most 2A11 assemblies are joined by mechanical fastening (rivets, bolts). If welding is required for your application, please consult our technical team to evaluate feasibility.<\/dd>\n<dt>Does Linsy provide MTC for 2A11 aluminum orders?<\/dt>\n<dd>Yes, a Mill Test Certificate (MTC) report is provided with every order, documenting the actual chemical composition and mechanical properties of the supplied material. SGS test reports are also available on request with additional testing cost.<\/dd>\n<dt>What is the typical lead time for 2A11 aluminum products?<\/dt>\n<dd>For in-stock standard sizes, delivery can be arranged within 10\u201360 days depending on order volume and destination. For custom sizes or non-stock tempers, typical production lead time is also within the 10\u201360 day range. Please contact our sales team for a specific delivery estimate based on your requirement.<\/dd>\n<dt>Can 2A11 aluminum be anodized?<\/dt>\n<dd>Yes, 2A11 can be anodized. However, due to its copper content, the anodized layer may appear darker or less uniform compared to 6xxx series alloys. For decorative applications where appearance is critical, please request sample panels before bulk ordering.<\/dd>\n<dt>What product forms does Linsy supply for 2A11 aluminum?<\/dt>\n<dd>We supply 2A11 aluminum in sheet, plate, coil, round bar, flat bar, square bar, and tube. Custom profiles and wire can also be produced on request. Please provide your specification or drawing for a tailored quotation.<\/dd>\n<dt>Is 2A11 suitable for marine applications?<\/dt>\n<dd>2A11 has relatively poor corrosion resistance due to its high copper content and is not generally recommended for unsupervised marine environments. If your application involves moisture or salt exposure, please consult our technical team \u2014 we may recommend 5xxx or 6xxx series alloys, or propose protective measures for 2A11 parts.<\/dd>\n<\/dl>\n<h2>FAQ g\u00e9n\u00e9rale sur les commandes<\/h2>\n<dl>\n<dt>What is the minimum order quantity (MOQ) for 2A11 aluminum?<\/dt>\n<dd>We support low-MOQ orders for custom sizes. For standard in-stock specifications, MOQ is typically one piece or one coil. Please contact our sales team for details based on your specific requirement.<\/dd>\n<dt>Does Linsy ship internationally?<\/dt>\n<dd>Yes, we regularly ship aluminum products to the United States, Europe, Japan, South Korea, and other international markets. Export-standard packaging and full documentation are provided.<\/dd>\n<dt>Can I request a sample before placing a bulk order?<\/dt>\n<dd>Yes, sample pieces can be arranged. Please contact our sales team to discuss sample size, temper, and shipping arrangements.<\/dd>\n<\/dl>","protected":false},"excerpt":{"rendered":"<p>2A11 aluminum alloy (GB\/T 3190) is a high-strength Al-Cu-Mg wrought aluminum alloy, commonly referred to as &#8220;hard aluminum.&#8221; Known for its excellent tensile strength, good fatigue resistance, and superior cold workability in the T4 temper, 2A11 is the preferred material for aircraft rivets, precision fasteners, and high-stress structural components. Linsy supplies 2A11 aluminum sheet, plate, coil, bar, and tube in tempers O, T4, and T6, with custom sizes, processing support, and MTC reports available.<\/p>\n<p>\n<strong>Formulaires disponibles :<\/strong> sheet \/ plate \/ coil \/ bar \/ tube \/ custom profile<br \/>\n<strong>Temp\u00e9raments courants :<\/strong> O \/ T4 \/ T6<br \/>\n<strong>Assistance technique :<\/strong> CNC machining \/ laser cutting \/ anodizing \/ polishing \/ cutting<br \/>\n<strong>Documents relatifs \u00e0 la qualit\u00e9 :<\/strong> Rapport MTC fourni avec chaque commande ; rapports d'essais SGS disponibles sur demande<\/p>","protected":false},"featured_media":9848,"template":"","meta":{"_seopress_titles_title":"2A11 Aluminum Alloy \u2014 Sheet, Plate, Bar & Tube Supplier | Linsy Aluminum","_seopress_titles_desc":"Source 2A11 aluminum alloy (GB\/T 3190) sheet, plate, bar, and tube in O, T4, T6 tempers. ISO 9001 certified. Custom sizes, MTC reports, low MOQ. Delivery within 10\u201360 days.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[85],"product_tag":[],"class_list":["post-9846","product","type-product","status-publish","has-post-thumbnail","product_cat-2000-series-aluminum-alloys","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product\/9846","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/media\/9848"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/media?parent=9846"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product_brand?post=9846"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product_cat?post=9846"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/fr\/wp-json\/wp\/v2\/product_tag?post=9846"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}