{"id":2947,"date":"2024-06-01T02:48:14","date_gmt":"2024-06-01T02:48:14","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&#038;p=2947"},"modified":"2026-07-08T15:01:11","modified_gmt":"2026-07-08T15:01:11","slug":"lega-di-alluminio-6005","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/it\/prodotto\/lega-di-alluminio-6005\/","title":{"rendered":"Lega di alluminio 6005"},"content":{"rendered":"<h2>What Is 6005 Aluminum?<\/h2>\n<p><strong>Alluminio 6005<\/strong> is a 6xxx-series, heat-treatable alloy built on the magnesium-silicide (Mg2Si) strengthening system. With roughly 0.5% magnesium and 0.6-0.9% silicon, it sits between 6063 (easier, weaker) and 6061 (stronger, less extrudable) in character.<\/p>\n<p>It extrudes well, welds readily, and reaches useful strength after aging, which is why it is common for structural frames, railings, and transport components.<\/p>\n<h2>Available 6005 Aluminum Products<\/h2>\n<h3>6005 Extruded Profiles, Tube and Bar<\/h3>\n<table>\n<thead>\n<tr>\n<th>Forma<\/th>\n<th>Temperamento<\/th>\n<th>Dimension range<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Profile \/ Tube \/ Bar<\/td>\n<td>T1, T4, T5, T6<\/td>\n<td>OD or side 6-400 mm, wall 0.5-40 mm, length 1000-6000 mm; profiles to drawing<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>6005 Sheet and Plate<\/h3>\n<table>\n<thead>\n<tr>\n<th>Forma<\/th>\n<th>Temperamento<\/th>\n<th>Dimension range<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Lastra \/ Piastra<\/td>\n<td>T4, T6<\/td>\n<td>Thickness 0.5-150 mm, width 1000-3000 mm, length 1000-6000 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Specifiche e denominazioni equivalenti<\/h2>\n<ul>\n<li><strong>EN:<\/strong> EN AW-6005 (AlMg0.5Si0.5)<\/li>\n<li><strong>UNS:<\/strong> UNS A96005<\/li>\n<li><strong>JIS:<\/strong> JIS A6005<\/li>\n<li><strong>Series \/ type:<\/strong> heat-treatable (6xxx, Mg+Si)<\/li>\n<\/ul>\n<h2>Composizione chimica<\/h2>\n<p>Typical composition of 6005 aluminum:<\/p>\n<table>\n<thead>\n<tr>\n<th>Elemento<\/th>\n<th>Composizione (%)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Si<\/td>\n<td>0.6-0.9<\/td>\n<\/tr>\n<tr>\n<td>Fe<\/td>\n<td>0.35 max<\/td>\n<\/tr>\n<tr>\n<td>Cu<\/td>\n<td>0,10 max<\/td>\n<\/tr>\n<tr>\n<td>Mn<\/td>\n<td>0,10 max<\/td>\n<\/tr>\n<tr>\n<td>Mg<\/td>\n<td>0.40-0.6<\/td>\n<\/tr>\n<tr>\n<td>Cr<\/td>\n<td>0,10 max<\/td>\n<\/tr>\n<tr>\n<td>Zn<\/td>\n<td>0,10 max<\/td>\n<\/tr>\n<tr>\n<td>Ti<\/td>\n<td>0,10 max<\/td>\n<\/tr>\n<tr>\n<td>Others (each \/ total)<\/td>\n<td>0.05 \/ 0.15<\/td>\n<\/tr>\n<tr>\n<td>Al<\/td>\n<td>Equilibrio<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Propriet\u00e0 meccaniche in base al trattamento termico<\/h2>\n<table>\n<thead>\n<tr>\n<th>Temperamento<\/th>\n<th>Tensile (MPa)<\/th>\n<th>Yield (MPa)<\/th>\n<th>Allungamento (%)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>T1<\/td>\n<td>160 min<\/td>\n<td>90 min<\/td>\n<td>12 min<\/td>\n<\/tr>\n<tr>\n<td>T4<\/td>\n<td>190 min<\/td>\n<td>110 min<\/td>\n<td>14 min<\/td>\n<\/tr>\n<tr>\n<td>T5<\/td>\n<td>200 min<\/td>\n<td>120 min<\/td>\n<td>10 min<\/td>\n<\/tr>\n<tr>\n<td>T6<\/td>\n<td>230 min<\/td>\n<td>190 min<\/td>\n<td>8 min<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Values are typical minimums for extruded sections per EN 755-2 and vary with section thickness.<\/p>\n<h2>Guida alla scelta della tempra<\/h2>\n<p><strong>T5<\/strong> is the common choice for extruded shapes: a fast cooled-and-aged condition giving good strength with efficient production.<\/p>\n<p><strong>T6<\/strong> provides the highest strength for structural parts where load matters more than formability.<\/p>\n<p><strong>T4<\/strong> is used when parts are formed or welded before final aging.<\/p>\n<h2>Caratteristiche principali<\/h2>\n<h3>Estrudibilit\u00e0<\/h3>\n<p>6005 flows well in extrusion, allowing complex profiles at reasonable press speeds.<\/p>\n<h3>Strength-to-weight<\/h3>\n<p>Medium strength after aging suits structural frames without the cost of 6061.<\/p>\n<h3>Resistenza alla corrosione<\/h3>\n<p>Good general corrosion resistance; anodizing further improves surface durability.<\/p>\n<h3>Saldabilit\u00e0<\/h3>\n<p>Readily welded by MIG\/TIG, though the heat-affected zone softens as with all 6xxx alloys.<\/p>\n<h2>Applicazioni<\/h2>\n<ul>\n<li>Structural extrusions and frameworks<\/li>\n<li>Handrails, railings, and balustrades<\/li>\n<li>Truck, trailer, and container frames<\/li>\n<li>Solar panel mounting structures<\/li>\n<li>Automotive and railway structural components<\/li>\n<li>Marine and architectural profiles<\/li>\n<\/ul>\n<h2>Note sulla lavorazione e sulla finitura superficiale<\/h2>\n<p>6005 welds with 4043 or 5356 filler; note the heat-affected zone loses some strength, so design for the welded condition where needed. It anodizes cleanly and machines well in T5\/T6. Forming is best done in T4 before aging.<\/p>\n<h2>Documenti di qualit\u00e0 e ispezione<\/h2>\n<ul>\n<li><strong>Mill Test Certificate (MTC):<\/strong> supplied with every order, reporting actual chemistry and mechanical properties of the delivered lot.<\/li>\n<li><strong>Dimension and visual inspection:<\/strong> size, flatness, surface, and edge condition are checked against the agreed specification.<\/li>\n<li><strong>Third-party inspection:<\/strong> SGS or equivalent reports can be arranged on request for specific orders.<\/li>\n<li><strong>Certificazioni:<\/strong> ISO 9001 (quality), ISO 14001 (environment), ISO 45001 (occupational health and safety).<\/li>\n<\/ul>\n<h2>Why Choose Linsy for 6005 Aluminum<\/h2>\n<p>Linsy Aluminum operates a production base with more than 20 years of experience in rolled and extruded aluminum products across the 1000 to 8000 series. We support buyers with cut-to-size service, CNC machining, laser cutting, and surface finishing (anodizing, polishing, brushing) under one roof.<\/p>\n<p>Every order ships with a mill test certificate (MTC) documenting chemistry and mechanical properties. Our quality system is certified to ISO 9001, ISO 14001, and ISO 45001. Third-party inspection reports (for example SGS) can be arranged on request for specific orders.<\/p>\n<p>We work to ASTM, EN, GB, and JIS specifications and supply customers in Europe, Asia, and other regions. Tell us your form, temper, and dimension requirements and we will return a quotation with lead time.<\/p>\n<h2>Risorse correlate<\/h2>\n<p>These articles help with alloy selection, fabrication, and procurement decisions:<\/p>\n<ul>\n<li><a href=\"https:\/\/premiumalu.com\/it\/proprieta-chiave-dellalluminio-6005-da-conoscere\/\">Capire l'alluminio 6005: Propriet\u00e0 chiave spiegate<\/a><\/li>\n<li><a href=\"https:\/\/premiumalu.com\/it\/guida-essenziale-alla-lega-di-alluminio-6005\/\">Tutto quello che c'\u00e8 da sapere sulla lega di alluminio 6005<\/a><\/li>\n<\/ul>\n<h2>6005 Aluminum FAQ<\/h2>\n<h3>6005 vs 6061 &#8211; what is the difference?<\/h3>\n<p>6061 is stronger and more versatile; 6005 extrudes more easily and is often chosen for complex profiles and structural frames where extreme strength is not required.<\/p>\n<h3>Is 6005 good for anodizing?<\/h3>\n<p>Yes. Its low impurity content gives a consistent anodized finish suitable for architectural and decorative use.<\/p>\n<h3>Which filler for welding 6005?<\/h3>\n<p>4043 or 5356 filler is typical, depending on the service environment and colour-match needs.<\/p>\n<h2>Domande frequenti generali sugli ordini<\/h2>\n<h3>Qual \u00e8 la quantit\u00e0 minima d'ordine?<\/h3>\n<p>Minimum order quantities depend on the form and temper. For common sheet, plate, and extrusion sizes we can often accept small lots; custom sizes and tempers are quoted per request. Contact us with your bill of materials for a firm MOQ.<\/p>\n<h3>What lead time can I expect?<\/h3>\n<p>For stock or regularly produced sizes, typical lead time is 10 to 60 days depending on quantity, temper, and any additional processing. Custom or rarely ordered specs may take longer; we confirm the date in the quotation.<\/p>\n<h3>Do you provide mill test certificates?<\/h3>\n<p>Yes. Every shipment includes an MTC reporting the actual chemistry and mechanical results for the supplied lot. SGS or other third-party inspection reports can be arranged when needed.<\/p>\n<h3>Can you cut to size or add processing?<\/h3>\n<p>Yes. We offer cut-to-length, precision sawing, CNC machining, laser cutting, and surface finishing (anodizing, polishing, brushing) so the material arrives closer to your finished part.<\/p>\n<h3>A quali standard fornite?<\/h3>\n<p>We regularly work to ASTM, EN, GB, and JIS specifications. If your project references a specific standard or designation, mention it in the RFQ so we match the requirement.<\/p>\n<h3>Come posso richiedere un preventivo?<\/h3>\n<p>Send your alloy, temper, form, dimensions, quantity, and required standard. We return a quotation with pricing, lead time, and the inspection documents included.<\/p>","protected":false},"excerpt":{"rendered":"<p><strong>Alluminio 6005<\/strong> is a heat-treatable 6xxx extrusion alloy with magnesium and silicon. It offers good medium strength, weldability, and excellent extrudability for structural and transport applications.<\/p>\n<p>\n<strong>Moduli disponibili:<\/strong> extrusion \/ tube \/ bar \/ profile \/ sheet<br \/>\n<strong>Temperamenti comuni:<\/strong> T1 \/ T4 \/ T5 \/ T6<br \/>\n<strong>Supporto per l'elaborazione:<\/strong> CNC machining \/ laser cutting \/ welding \/ anodizing<br \/>\n<strong>Documenti di qualit\u00e0:<\/strong> Rapporto MTC allegato a ogni ordine<\/p>","protected":false},"featured_media":4722,"template":"","meta":{"_seopress_titles_title":"6005 Aluminum Supplier | EN AW-6005 | ISO 9001","_seopress_titles_desc":"Linsy supplies 6005 aluminum extrusions, tube, plate for structural and transport use. Heat-treatable, weldable, EN AW-6005, MTC per order.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[89],"product_tag":[],"class_list":["post-2947","product","type-product","status-publish","has-post-thumbnail","product_cat-6000-series-aluminum-alloys","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/it\/wp-json\/wp\/v2\/product\/2947","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/it\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/it\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/it\/wp-json\/wp\/v2\/media\/4722"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/it\/wp-json\/wp\/v2\/media?parent=2947"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/it\/wp-json\/wp\/v2\/product_brand?post=2947"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/it\/wp-json\/wp\/v2\/product_cat?post=2947"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/it\/wp-json\/wp\/v2\/product_tag?post=2947"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}