{"id":8837,"date":"2025-06-28T08:28:04","date_gmt":"2025-06-28T08:28:04","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&p=8837"},"modified":"2026-07-08T15:01:14","modified_gmt":"2026-07-08T15:01:14","slug":"5356-aluminiumlegering","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/nl\/product\/5356-aluminiumlegering\/","title":{"rendered":"5356 aluminiumlegering"},"content":{"rendered":"

What Is 5356 Aluminum Alloy Aluminum?<\/h2>\n

5356 Aluminum Alloy (AlMg5CrTiMn) is a non-heat-treatable aluminum-magnesium (5xxx) alloy. Its strength comes from magnesium in solid solution and strain hardening, not heat treatment. It offers good corrosion resistance\u2014especially in marine and industrial environments\u2014and welds well, which makes it a common choice for structures exposed to water, chemicals, or cycling loads.<\/p>\n

Available 5356 Aluminum Alloy Aluminum Products<\/h2>\n

5356 Aluminum Alloy is supplied in several forms and tempers. Standard size ranges are below; other dimensions can be discussed with our team.<\/p>\n

Sheet & Plate<\/h3>\n\n\n\n\n\n\n\n
Item<\/th>\nRange<\/th>\n<\/tr>\n
Dikte<\/td>\n0.5 \u2013 150 mm<\/td>\n<\/tr>\n
Breedte<\/td>\n1000 \u2013 3000 mm<\/td>\n<\/tr>\n
Lengte<\/td>\n1000 \u2013 6000 mm<\/td>\n<\/tr>\n
Common tempers<\/td>\nO, H22<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Bar (Round \/ Flat \/ Square)<\/h3>\n\n\n\n\n\n\n
Item<\/th>\nRange<\/th>\n<\/tr>\n
Diameter \/ side<\/td>\n6 \u2013 400 mm<\/td>\n<\/tr>\n
Lengte<\/td>\n1000 \u2013 6000 mm<\/td>\n<\/tr>\n
Common tempers<\/td>\nO, H22<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Tube & Pipe<\/h3>\n\n\n\n\n\n\n\n
Item<\/th>\nRange<\/th>\n<\/tr>\n
Outer diameter<\/td>\n6 \u2013 400 mm<\/td>\n<\/tr>\n
Wall thickness<\/td>\n0.5 \u2013 40 mm<\/td>\n<\/tr>\n
Lengte<\/td>\n1000 \u2013 6000 mm<\/td>\n<\/tr>\n
Common tempers<\/td>\nO, H22<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Wire & Coil<\/h3>\n\n\n\n\n\n\n\n
Item<\/th>\nRange<\/th>\n<\/tr>\n
Diameter<\/td>\n0.8 \u2013 12 mm<\/td>\n<\/tr>\n
Coil weight<\/td>\n10 \u2013 500 kg<\/td>\n<\/tr>\n
Size tolerance<\/td>\n\u00b1 0.05 mm<\/td>\n<\/tr>\n
Common tempers<\/td>\nO, H22<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Specificaties en gelijkwaardige benamingen<\/h2>\n\n\n\n\n\n\n
Standaard<\/th>\nBenaming<\/th>\n<\/tr>\n
AA (USA)<\/td>\n5356 aluminiumlegering<\/td>\n<\/tr>\n
EN AW<\/td>\nAlMg5CrTiMn<\/td>\n<\/tr>\n
Serie<\/td>\n5000 (Al-Mg, non-heat-treatable)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Chemische samenstelling<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n
Element<\/th>\nGewicht %<\/th>\n<\/tr>\n
Si<\/td>\n0,25 max<\/td>\n<\/tr>\n
Fe<\/td>\n0,40 max<\/td>\n<\/tr>\n
Cu<\/td>\n0,10 max<\/td>\n<\/tr>\n
Mn<\/td>\n0.05 - 0.20<\/td>\n<\/tr>\n
Mg<\/td>\n4.5 - 5.5<\/td>\n<\/tr>\n
Cr<\/td>\n0.05 - 0.20<\/td>\n<\/tr>\n
Zn<\/td>\n0,10 max<\/td>\n<\/tr>\n
Ti<\/td>\n0.06 - 0.20<\/td>\n<\/tr>\n
Al<\/td>\nSaldo<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Values are typical AA composition ranges; confirm against the ordered specification and the supplied MTC.<\/p>\n

Mechanische eigenschappen per hardingsgraad<\/h2>\n\n\n\n\n\n
Temper<\/th>\nTensile (MPa)<\/th>\nYield (MPa)<\/th>\nRek (%)<\/th>\nBrinell<\/th>\n<\/tr>\n
O<\/td>\n290<\/td>\n130<\/td>\n18<\/td>\n65<\/td>\n<\/tr>\n
H22<\/td>\n320<\/td>\n200<\/td>\n12<\/td>\n75<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Mechanical values are representative room-temperature typicals for plate, sheet, or bar and should be confirmed against the ordered thickness and the supplied MTC.<\/p>\n

Gids voor het kiezen van de juiste temperatuur<\/h2>\n