8082 is a general-purpose 8000-series alloy positioned between the soft forming grades and the high-strength structural alloys. Its lean magnesium addition improves strength and corrosion resistance over pure-aluminum grades while keeping good workability, making it useful for welded assemblies, enclosures, and architectural parts.<\/p>\n
Typical production ranges are listed below; custom dimensions are available on request.<\/p>\n
| Formularz<\/th>\n | Temperament<\/th>\n | Dimension<\/th>\n | Zakres<\/th>\n | Note<\/th>\n<\/tr>\n<\/thead>\n | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blacha i kr\u0105g<\/td>\n | O, H14, H18<\/td>\n | Grubo\u015b\u0107<\/td>\n | 0.5 – 100 mm<\/td>\n | Custom widths\/lengths<\/td>\n<\/tr>\n | ||||||||||||||||||||||||||||||||||||||||||||
| P\u0142yta<\/td>\n | O, H14, H18<\/td>\n | Grubo\u015b\u0107<\/td>\n | 6 – 120 mm<\/td>\n | Quarto<\/td>\n<\/tr>\n | ||||||||||||||||||||||||||||||||||||||||||||
| Okr\u0105g\u0142y pr\u0119t<\/td>\n | O, H14, H18<\/td>\n | \u015arednica<\/td>\n | 6 – 300 mm<\/td>\n | Cut to length<\/td>\n<\/tr>\n | ||||||||||||||||||||||||||||||||||||||||||||
| Rura<\/td>\n | O, H14, H18<\/td>\n | \u015arednica zewn\u0119trzna<\/td>\n | 10 – 300 mm<\/td>\n | Wall 1 – 30 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n8082 Specifications & Equivalent Designations<\/h2>\nChemical Composition of 8082 Aluminum<\/h2>\n
|
Good general and atmospheric corrosion resistance, suitable for indoor and light outdoor use.<\/p>\n
Reasonable weldability and formability in O temper support fabricated assemblies.<\/p>\n
Medium strength — above pure aluminum but below 5xxx\/6xxx structural grades; pick per load case.<\/p>\n
8082 can be cut, bent, and welded with standard aluminum practice. Avoid over-aging during welding by controlling heat input. Anodizing gives a uniform decorative finish; specify temper and post-weld treatment for appearance-critical parts.<\/p>\n
Every shipment is accompanied by an MTC report detailing chemical composition and mechanical test results. Third-party inspection and SGS test reports can be arranged on request. Incoming and outgoing inspection covers dimensions, surface condition, and mechanical properties.<\/p>\n
Linsy operates a Shenzhen production base with over 20 years of aluminum manufacturing experience, supplying 1000–8000 series alloys to global B2B buyers. We support custom dimensions, tempers, and processing for both prototype and production volumes.<\/p>\n
Engineering guides and specification references help with alloy selection and design. The external links below are provided for background reading and should be replaced with Linsy-owned content before publication (verify before use).<\/p>\n