{"id":8840,"date":"2025-06-28T08:38:07","date_gmt":"2025-06-28T08:38:07","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&p=8840"},"modified":"2026-07-08T15:01:18","modified_gmt":"2026-07-08T15:01:18","slug":"stop-aluminium-5456","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/pl\/produkt\/stop-aluminium-5456\/","title":{"rendered":"Stop aluminium 5456"},"content":{"rendered":"

What Is 5456 Aluminum?<\/h2>\n

5456 is a high-magnesium (about 5 percent) non-heat-treatable 5xxx alloy and one of the strongest of the work-hardenable grades. It combines high strength with excellent corrosion resistance in marine and aggressive environments, and is used where 5083 is not quite strong enough.<\/p>\n

Available 5456 Aluminum Products<\/h2>\n

Linsy supplies 5456 in plate, sheet, bar, tube, and extruded profiles. The tempers most commonly supplied are O, H111, H112, H116, and H321<\/strong>. Poni\u017csze wymiary to typowe zakresy; inne rozmiary mo\u017cna om\u00f3wi\u0107 na \u017cyczenie.<\/p>\n

Blacha i kr\u0105g<\/h3>\n

5456 sheet and coil are supplied in thicknesses from 0.5 mm to 12 mm, widths up to 2600 mm, and lengths up to 6000 mm or cut to size.<\/p>\n

P\u0142yta<\/h3>\n

5456 plate is available from 6 mm up to 120 mm thick, with standard widths up to 3000 mm, commonly in H321 or H116.<\/p>\n

Pr\u0119t (okr\u0105g\u0142y, p\u0142aski, kwadratowy)<\/h3>\n

Round, flat, and square bars are produced in diameters or side lengths from 6 mm to 300 mm, typically in H111, H112, or O.<\/p>\n

Rura i przew\u00f3d rurowy<\/h3>\n

5456 tube and pipe are supplied in outer diameters from 6 mm to 400 mm with wall thicknesses from 0.5 mm to 40 mm, in H116 or H321 for marine service.<\/p>\n

Profil wyciskany<\/h3>\n

Extruded angles, channels, and custom profiles are available on request, normally in H111 or H112 temper.<\/p>\n

Dane techniczne i odpowiedniki oznacze\u0144<\/h2>\n

5456 is identified by the following common standards and designations.<\/p>\n\n\n\n\n\n\n\n
Standard<\/th>\nOznaczenie<\/th>\n<\/tr>\n<\/thead>\n
AA<\/td>\n5456<\/td>\n<\/tr>\n
UNS<\/td>\nA95456<\/td>\n<\/tr>\n
EN AW<\/td>\nEN AW-AlMg5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sk\u0142ad chemiczny<\/h2>\n

The typical composition of 5456 aluminum is listed below in weight percent, with aluminum as the balance.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Element<\/th>\nSk\u0142ad (%)<\/th>\n<\/tr>\n<\/thead>\n
Krzem (Si)<\/td>\n0,25 maks<\/td>\n<\/tr>\n
\u017belazo (Fe)<\/td>\nmaks. 0,40<\/td>\n<\/tr>\n
Mied\u017a (Cu)<\/td>\n0,10 maks<\/td>\n<\/tr>\n
Mangan (Mn)<\/td>\n0.50 – 1.00<\/td>\n<\/tr>\n
Magnez (Mg)<\/td>\n4.7 – 5.5<\/td>\n<\/tr>\n
Chrom (Cr)<\/td>\n0,05 \u2013 0,20<\/td>\n<\/tr>\n
Cynk (Zn)<\/td>\n0,25 maks<\/td>\n<\/tr>\n
Tytan (Ti)<\/td>\n0,20 maks.<\/td>\n<\/tr>\n
Pozostali \u2013 po jednym<\/td>\n0.05<\/td>\n<\/tr>\n
Pozosta\u0142e \u2013 og\u00f3\u0142em<\/td>\n0.15<\/td>\n<\/tr>\n
Aluminium (Al)<\/td>\nR\u00f3wnowaga<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

W\u0142a\u015bciwo\u015bci mechaniczne w zale\u017cno\u015bci od stanu utwardzenia<\/h2>\n

Poni\u017csze warto\u015bci s\u0105 typowe dla produkt\u00f3w walcowanych i wyciskanych i nale\u017cy je potwierdzi\u0107 na podstawie \u015bwiadectwa kontroli hutniczej dla zam\u00f3wionego stanu i grubo\u015bci.<\/p>\n\n\n\n\n\n\n\n\n\n
Temperament<\/th>\nWytrzyma\u0142o\u015b\u0107 na rozci\u0105ganie (MPa)<\/th>\nGranica plastyczno\u015bci (MPa)<\/th>\nWyd\u0142u\u017cenie (%)<\/th>\n<\/tr>\n<\/thead>\n
O<\/td>\n310 – 340<\/td>\n145 min<\/td>\n18<\/td>\n<\/tr>\n
H111<\/td>\n310 min<\/td>\n180 min<\/td>\n14<\/td>\n<\/tr>\n
H112<\/td>\n310 min<\/td>\n180 min<\/td>\n12<\/td>\n<\/tr>\n
H116<\/td>\n310 min<\/td>\n230 min<\/td>\n12<\/td>\n<\/tr>\n
H321<\/td>\n310 min<\/td>\n230 min<\/td>\n12<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Przewodnik po doborze hartowania<\/h2>\n

Specify H116 or H321 for marine, armor, and structural parts exposed to corrosion. H111 and H112 are used for structural and welded components, while O is chosen for heavy forming.<\/p>\n

Kluczowe cechy charakterystyczne<\/h2>\n

Wysoka wytrzyma\u0142o\u015b\u0107<\/h3>\n

Among work-hardenable alloys, 5456 ranks near the top for as-fabricated strength.<\/p>\n

Odporno\u015b\u0107 na korozj\u0119<\/h3>\n

It performs well in seawater and chemical environments and resists exfoliation and stress corrosion cracking better than many alternatives.<\/p>\n

Spawalno\u015b\u0107<\/h3>\n

It welds with MIG\/TIG using compatible 5xxx fillers, though care is needed to avoid sensitization in thick sections.<\/p>\n

Formowalno\u015b\u0107<\/h3>\n

Formability is moderate; heavily strain-hardened tempers are less formable than O or H111.<\/p>\n

Zastosowania<\/h2>\n