{"id":8918,"date":"2025-07-19T06:50:22","date_gmt":"2025-07-19T06:50:22","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&p=8918"},"modified":"2026-07-08T15:01:14","modified_gmt":"2026-07-08T15:01:14","slug":"stop-aluminium-5657","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/pl\/produkt\/stop-aluminium-5657\/","title":{"rendered":"Stop aluminium 5657"},"content":{"rendered":"

What Is 5657 Aluminum?<\/h2>\n

5657 is a non-heat-treatable 5xxx alloy with about 1 percent magnesium, developed for high-quality anodized surfaces. It provides an excellent anodizing response, good corrosion resistance, and moderate strength, and is widely used for decorative and architectural finishes.<\/p>\n

Available 5657 Aluminum Products<\/h2>\n

Linsy supplies 5657 mainly as sheet and coil for anodized decorative finishes, with bar and profiles available on request. The tempers most commonly supplied are O, H25, H28, and H38<\/strong>. Poni\u017csze wymiary to typowe zakresy; inne rozmiary mo\u017cna om\u00f3wi\u0107 na \u017cyczenie.<\/p>\n

Blacha i kr\u0105g<\/h3>\n

5657 is supplied primarily as thin-gauge sheet and coil in thicknesses from 0.3 mm to 4 mm, widths up to 2000 mm, and lengths up to 6000 mm or cut to size.<\/p>\n

P\u0142yta<\/h3>\n

Thick plate is not a standard 5657 product; thin rolled coil and sheet are the typical forms. Other gauges can be discussed on request.<\/p>\n

Pr\u0119t (okr\u0105g\u0142y, p\u0142aski, kwadratowy)<\/h3>\n

Pr\u0119ty okr\u0105g\u0142e, p\u0142askie i kwadratowe mog\u0105 by\u0107 produkowane o \u015brednicach lub d\u0142ugo\u015bciach boku od 6 mm do 200 mm, zazwyczaj w stanie O lub H25.<\/p>\n

Rura i przew\u00f3d rurowy<\/h3>\n

5657 tube can be supplied in outer diameters from 6 mm to 200 mm with wall thicknesses from 0.5 mm to 20 mm, usually in O or H25 temper.<\/p>\n

Profil wyciskany<\/h3>\n

Profile wyciskane i ci\u0105gnione do listew s\u0105 dost\u0119pne na \u017cyczenie.<\/p>\n

Dane techniczne i odpowiedniki oznacze\u0144<\/h2>\n

5657 is identified by the following common standards and designations.<\/p>\n\n\n\n\n\n\n\n
Standard<\/th>\nOznaczenie<\/th>\n<\/tr>\n<\/thead>\n
AA<\/td>\n5657<\/td>\n<\/tr>\n
UNS<\/td>\nA95657<\/td>\n<\/tr>\n
EN AW<\/td>\nEN AW-AlMg1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sk\u0142ad chemiczny<\/h2>\n

The typical composition of 5657 aluminum is listed below in weight percent, with aluminum as the balance.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Element<\/th>\nSk\u0142ad (%)<\/th>\n<\/tr>\n<\/thead>\n
Krzem (Si)<\/td>\n0,25 maks<\/td>\n<\/tr>\n
\u017belazo (Fe)<\/td>\nmaks. 0,40<\/td>\n<\/tr>\n
Mied\u017a (Cu)<\/td>\n0,10 maks<\/td>\n<\/tr>\n
Mangan (Mn)<\/td>\n0.15 – 0.35<\/td>\n<\/tr>\n
Magnez (Mg)<\/td>\n0,8 \u2013 1,2<\/td>\n<\/tr>\n
Chrom (Cr)<\/td>\n0.05 max<\/td>\n<\/tr>\n
Cynk (Zn)<\/td>\n0,10 maks<\/td>\n<\/tr>\n
Tytan (Ti)<\/td>\n0.03 max<\/td>\n<\/tr>\n
Pozostali \u2013 po jednym<\/td>\n0.05<\/td>\n<\/tr>\n
Pozosta\u0142e \u2013 og\u00f3\u0142em<\/td>\n0.15<\/td>\n<\/tr>\n
Aluminium (Al)<\/td>\nR\u00f3wnowaga<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

W\u0142a\u015bciwo\u015bci mechaniczne w zale\u017cno\u015bci od stanu utwardzenia<\/h2>\n

Poni\u017csze warto\u015bci s\u0105 typowe dla produkt\u00f3w walcowanych i wyciskanych i nale\u017cy je potwierdzi\u0107 na podstawie \u015bwiadectwa kontroli hutniczej dla zam\u00f3wionego stanu i grubo\u015bci.<\/p>\n\n\n\n\n\n\n\n\n
Temperament<\/th>\nWytrzyma\u0142o\u015b\u0107 na rozci\u0105ganie (MPa)<\/th>\nGranica plastyczno\u015bci (MPa)<\/th>\nWyd\u0142u\u017cenie (%)<\/th>\n<\/tr>\n<\/thead>\n
O<\/td>\n115 – 160<\/td>\n45 min<\/td>\n18<\/td>\n<\/tr>\n
H25<\/td>\n180 – 220<\/td>\n150 min<\/td>\n8<\/td>\n<\/tr>\n
H28<\/td>\n215 – 260<\/td>\n180 min<\/td>\n5<\/td>\n<\/tr>\n
H38<\/td>\n230 \u2013 270<\/td>\n200 min.<\/td>\n4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Przewodnik po doborze hartowania<\/h2>\n

Choose O or H25 for bright decorative trim that is formed before anodizing; H28 and H38 give higher strength for anodized parts that are not heavily formed.<\/p>\n

Kluczowe cechy charakterystyczne<\/h2>\n

Anodizing response<\/h3>\n

5657 is valued for a clear, consistent, and attractive anodized finish, its main selection reason.<\/p>\n

Odporno\u015b\u0107 na korozj\u0119<\/h3>\n

Odporno\u015b\u0107 na korozj\u0119 jest dobra w przypadku ekspozycji wewn\u0119trznej i architektonicznej.<\/p>\n

Formowalno\u015b\u0107<\/h3>\n

In O and H25 tempers it forms and bends well for panels and trim.<\/p>\n

Si\u0142a<\/h3>\n

Strength is moderate; the grade is chosen for appearance more than load capacity.<\/p>\n

Zastosowania<\/h2>\n