{"id":9256,"date":"2025-09-27T07:11:51","date_gmt":"2025-09-27T07:11:51","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&#038;p=9256"},"modified":"2026-07-07T08:32:45","modified_gmt":"2026-07-07T08:32:45","slug":"1050-o-h14-drut-aluminiowy","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/pl\/produkt\/1050-o-h14-drut-aluminiowy\/","title":{"rendered":"Drut aluminiowy 1050-O\/H14"},"content":{"rendered":"<h2>What Is 1050 Aluminum Wire?<\/h2>\n<p>1050 aluminum wire is a commercially pure aluminum alloy belonging to the 1000 series, with a minimum aluminum content of 99.5%. As a non-heat-treatable alloy, 1050 derives its strength primarily from cold working (H14 temper) or exists in a fully annealed soft state (O temper). The high purity of 1050 gives it excellent electrical conductivity\u2014typically 60\u201362% IACS (International Annealed Copper Standard)\u2014making it one of the most cost-effective conductive aluminum grades available.<\/p>\n<p>In addition to electrical performance, 1050 aluminum wire offers superior corrosion resistance due to its pure aluminum composition, which forms a protective oxide layer in most atmospheric and chemical environments. It is highly formable in the O temper and retains good workability in H14, making it suitable for drawing, bending, and forming into finished wire products.<\/p>\n<p>1050 aluminum wire is supplied in two primary tempers: O (annealed, maximum ductility) and H14 (strain hardened to half hard). Linsy stocks and supplies 1050 wire in diameters ranging from 0.8 mm to 30 mm, with custom sizes available upon request.<\/p>\n<h2>1050 Aluminum Wire Specifications<\/h2>\n<h3>Dost\u0119pne temperatury<\/h3>\n<table>\n<thead>\n<tr>\n<th>Temperament<\/th>\n<th>Stan<\/th>\n<th>Typowe zastosowanie<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>O<\/td>\n<td>Annealed (soft)<\/td>\n<td>Maximum formability, drawing, flexible connections<\/td>\n<\/tr>\n<tr>\n<td>H14<\/td>\n<td>Strain hardened to half hard<\/td>\n<td>Structural wire, moderate strength, good formability<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>Wire Diameter Range<\/h3>\n<table>\n<thead>\n<tr>\n<th>Specyfikacja<\/th>\n<th>Warto\u015b\u0107<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Diameter range<\/td>\n<td>0,8 \u2013 30 mm<\/td>\n<\/tr>\n<tr>\n<td>Diameter tolerance<\/td>\n<td>\u00b1 0.02 \u2013 0.10 mm (depending on diameter)<\/td>\n<\/tr>\n<tr>\n<td>Coil weight<\/td>\n<td>Minimum 50 kg per coil<\/td>\n<\/tr>\n<tr>\n<td>Surface finish<\/td>\n<td>Mill finish \/ bright drawn \/ oxidation treated (optional)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>Sk\u0142ad chemiczny<\/h3>\n<table>\n<thead>\n<tr>\n<th>Element<\/th>\n<th>Percentage (Max, unless noted)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Si<\/td>\n<td>0.25% Max<\/td>\n<\/tr>\n<tr>\n<td>Fe<\/td>\n<td>0.40% Max<\/td>\n<\/tr>\n<tr>\n<td>Cu<\/td>\n<td>0.05% Max<\/td>\n<\/tr>\n<tr>\n<td>Mn<\/td>\n<td>0.05% Max<\/td>\n<\/tr>\n<tr>\n<td>Mg<\/td>\n<td>0.05% Max<\/td>\n<\/tr>\n<tr>\n<td>Zn<\/td>\n<td>0.07% Max<\/td>\n<\/tr>\n<tr>\n<td>Ti<\/td>\n<td>0.05% Max<\/td>\n<\/tr>\n<tr>\n<td>Inni (ka\u017cdy)<\/td>\n<td>0.03% Max<\/td>\n<\/tr>\n<tr>\n<td>Inne (\u0142\u0105cznie)<\/td>\n<td>0.10% Max<\/td>\n<\/tr>\n<tr>\n<td>Al<\/td>\n<td>99.5% Min<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><em>Values per ASTM B233 \/ EN 573-3 for 1050 \/ EN AW-1050A.<\/em><\/p>\n<h3>W\u0142a\u015bciwo\u015bci mechaniczne w zale\u017cno\u015bci od stanu utwardzenia<\/h3>\n<table>\n<thead>\n<tr>\n<th>Nieruchomo\u015b\u0107<\/th>\n<th>O Temper<\/th>\n<th>H14 Temper<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Tensile strength (MPa)<\/td>\n<td>60 \u2013 95<\/td>\n<td>100 \u2013 135<\/td>\n<\/tr>\n<tr>\n<td>Yield strength (MPa)<\/td>\n<td>20 \u2013 35<\/td>\n<td>70 \u2013 110<\/td>\n<\/tr>\n<tr>\n<td>Wyd\u0142u\u017cenie (%)<\/td>\n<td>20 \u2013 35%<\/td>\n<td>5 \u2013 15%<\/td>\n<\/tr>\n<tr>\n<td>Electrical conductivity (% IACS)<\/td>\n<td>61 \u2013 62%<\/td>\n<td>60 \u2013 62%<\/td>\n<\/tr>\n<tr>\n<td>Thermal conductivity (W\/m\u00b7K)<\/td>\n<td>222<\/td>\n<td>222<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>1050 Aluminum Wire Applications<\/h2>\n<p>1050 aluminum wire is specified wherever high electrical conductivity, corrosion resistance, and formability are required. Typical applications include:<\/p>\n<ul>\n<li><strong>Electrical conductors:<\/strong> Busbars, flexible jumpers, transformer windings, and grounding conductors where 60\u201362% IACS conductivity is sufficient.<\/li>\n<li><strong>Flexible connections:<\/strong> Braided or stranded aluminum wire for electrical cabinets, switchgear, and battery interconnects.<\/li>\n<li><strong>Chemical processing:<\/strong> Wire mesh, screens, and filtering elements exposed to corrosive chemicals where high-purity aluminum resists attack.<\/li>\n<li><strong>Heat exchanger fins:<\/strong> Thin 1050 wire or strand used in finned-tube heat exchangers.<\/li>\n<li><strong>General forming and drawing:<\/strong> O-temper 1050 wire is excellent for cold heading, rivet wire, and further drawing into finer gauges.<\/li>\n<\/ul>\n<h2>Equivalent Designations<\/h2>\n<table>\n<thead>\n<tr>\n<th>Standard<\/th>\n<th>Oznaczenie<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>AA (Stowarzyszenie Aluminium)<\/td>\n<td>1050<\/td>\n<\/tr>\n<tr>\n<td>UNS<\/td>\n<td>A91050<\/td>\n<\/tr>\n<tr>\n<td>EN (europejski)<\/td>\n<td>EN AW-1050A \/ Al 99.5<\/td>\n<\/tr>\n<tr>\n<td>ISO<\/td>\n<td>Al99.5<\/td>\n<\/tr>\n<tr>\n<td>JIS (Japonia)<\/td>\n<td>A1050<\/td>\n<\/tr>\n<tr>\n<td>GB\/T (China)<\/td>\n<td>1050<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Processing and Surface Finish Notes<\/h2>\n<p>1050 aluminum wire is typically supplied in mill finish condition. For electrical applications, bright drawn or lightly oxidized surfaces are available to improve contact resistance. When specifying 1050 wire for further drawing or forming:<\/p>\n<ul>\n<li>O temper wire offers maximum ductility and is the preferred starting condition for cold heading and deep drawing.<\/li>\n<li>H14 temper provides a balance of strength and formability; it can be bent and formed with reasonable radii but will not accept the same severe deformation as O temper.<\/li>\n<li>1050 has excellent weldability using TIG or MIG processes with 1050 or 4043 filler wire. The weld zone will have lower strength than the base wire.<\/li>\n<li>For anodizing, 1050 produces a clear, translucent oxide layer. However, due to the absence of alloying elements, the anodized layer is softer than on 5000 or 6000 series alloys.<\/li>\n<\/ul>\n<h2>Quality Documents and Inspection<\/h2>\n<p>Linsy provides the following quality documentation with every 1050 aluminum wire order:<\/p>\n<ul>\n<li><strong>MTC (certyfikat z bada\u0144 fabrycznych):<\/strong> Included with every shipment, reporting actual chemical composition and mechanical test results for the production lot.<\/li>\n<li><strong>Raporty z bada\u0144 SGS:<\/strong> Dost\u0119pne na \u017cyczenie w celu niezale\u017cnej weryfikacji sk\u0142adu i w\u0142a\u015bciwo\u015bci przez stron\u0119 trzeci\u0105.<\/li>\n<li><strong>RoHS and REACH compliance:<\/strong> Declaration available confirming 1050 aluminum wire is free from restricted substances.<\/li>\n<\/ul>\n<p>All 1050 wire is produced under Linsy&#8217;s ISO 9001-certified quality management system. In-process inspections verify diameter tolerance, surface quality, and coil weight before shipment.<\/p>\n<h2>Why Choose Linsy for 1050 Aluminum Wire?<\/h2>\n<p>Linsy Aluminum is a direct manufacturer and supplier of 1050 aluminum wire, serving B2B buyers across 20+ countries. Our 1050 wire production is certified under ISO 9001, ISO 14001, and ISO 45001, ensuring consistent quality, environmental responsibility, and workplace safety.<\/p>\n<p>Key advantages of sourcing 1050 aluminum wire from Linsy:<\/p>\n<ul>\n<li><strong>Consistent purity:<\/strong> 99.5% minimum aluminum content verified by spectrochemical analysis on every production batch.<\/li>\n<li><strong>Custom diameters:<\/strong> In addition to standard 0.8\u201330 mm range, Linsy can draw custom diameters to your specification.<\/li>\n<li><strong>Flexible coil packaging:<\/strong> Coils are properly packaged to prevent deformation during transport, with optional wooden spools or plastic reels.<\/li>\n<li><strong>Low MOQ:<\/strong> Linsy supports both prototype and production-volume orders with competitive minimum order quantities.<\/li>\n<li><strong>Delivery:<\/strong> Most standard sizes ship within 10\u201360 days. Expedited production can be arranged for urgent requirements.<\/li>\n<li><strong>Technical support:<\/strong> Our engineering team can assist with temper selection, diameter tolerance, and application-specific recommendations.<\/li>\n<\/ul>\n<h2>Ordering FAQ<\/h2>\n<p><strong>What is the difference between O and H14 temper for 1050 wire?<\/strong><br \/>\nO temper is fully annealed and soft, with maximum ductility \u2014 ideal for further drawing or forming. H14 is strain hardened to approximately half the full hard condition, offering higher strength but lower formability. Choose O if you need to form the wire further; choose H14 if the wire will be used in its supplied condition.<\/p>\n<p><strong>Can 1050 wire be used for electrical conductors?<\/strong><br \/>\nYes. 1050 aluminum wire has 60\u201362% IACS electrical conductivity, making it suitable for many electrical applications including busbars, jumpers, and grounding. For higher conductivity, 1350 alloy (EC grade, 61.5% min IACS) may be considered.<\/p>\n<p><strong>What coil weights are available?<\/strong><br \/>\nStandard coils are a minimum of 50 kg. Larger coils or multiple smaller coils can be supplied depending on diameter and packaging requirements.<\/p>\n<p><strong>Does Linsy provide MTC reports?<\/strong><br \/>\nYes, an MTC (Mill Test Certificate) is provided with every order, reporting actual chemical composition and mechanical properties for the supplied lot.<\/p>\n<p><strong>Can 1050 wire be welded?<\/strong><br \/>\nYes, 1050 has excellent weldability using TIG or MIG processes. Use 1050 or 4043 filler wire. Note that the weld zone will have lower strength than the base material.<\/p>\n<h2>Powi\u0105zane materia\u0142y<\/h2>\n<p>For more technical background on this alloy, read our complete guide:<\/p>\n<ul>\n<li><a href=\"https:\/\/premiumalu.com\/pl\/kompletny-przewodnik-po-stopie-aluminium-1050\/\">Wszystko, co musisz wiedzie\u0107 o stopie aluminium 1050<\/a><\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>1050 aluminum wire is a non-heat-treatable high-purity alloy with a minimum aluminum content of 99.5%. This purity gives 1050 wire excellent electrical conductivity (60\u201362% IACS) and superior corrosion resistance, making it a preferred choice for electrical conductors, flexible connections, and chemical processing applications. Linsy supplies 1050 aluminum wire in O (annealed) and H14 tempers, with diameters from 0.8 mm to 30 mm, custom sizes available, MTC reports provided, and SGS test reports available on request.<\/p>\n<p>\n<strong>Available form:<\/strong> wire \/ coil<br \/>\n<strong>Typowe temperamenty:<\/strong> O \/ H14<br \/>\n<strong>Diameter range:<\/strong> 0,8 \u2013 30 mm<br \/>\n<strong>Wsparcie w zakresie przetwarzania:<\/strong> custom drawing \/ coil packaging \/ cut-to-length<br \/>\n<strong>Dokumenty dotycz\u0105ce jako\u015bci:<\/strong> MTC report with every order, SGS test reports on request<\/p>","protected":false},"featured_media":2874,"template":"","meta":{"_seopress_titles_title":"1050 Aluminum Wire \u2014 O & H14 Temper Supplier | Linsy Aluminum","_seopress_titles_desc":"Source 1050 aluminum wire in O and H14 tempers. 99.5% pure, 60-62% IACS conductivity. Diameters 0.8-30 mm. ISO 9001 certified. MTC with every order. Low MOQ.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[196],"product_tag":[],"class_list":["post-9256","product","type-product","status-publish","has-post-thumbnail","product_cat-aluminum-wire","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/pl\/wp-json\/wp\/v2\/product\/9256","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/pl\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/pl\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/pl\/wp-json\/wp\/v2\/media\/2874"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/pl\/wp-json\/wp\/v2\/media?parent=9256"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/pl\/wp-json\/wp\/v2\/product_brand?post=9256"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/pl\/wp-json\/wp\/v2\/product_cat?post=9256"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/pl\/wp-json\/wp\/v2\/product_tag?post=9256"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}