8011 is an aluminum–iron–silicon alloy optimized for thin-gauge and formed products. Its iron and silicon content promotes fine grain and good rollability, while keeping enough ductility for deep drawing. It is the workhorse alloy for household and packaging foil, pharmaceutical closure stock, and a range of formed sheet parts.<\/p>\n
Typical production ranges are listed below; custom dimensions are available on request.<\/p>\n
| Formul\u00e1rio<\/th>\n | Temperamento<\/th>\n | Dimension<\/th>\n | Range<\/th>\n | Note<\/th>\n<\/tr>\n<\/thead>\n | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Foil & Coil<\/td>\n | O, H14, H18<\/td>\n | Espessura<\/td>\n | 0.006 – 0.2 mm<\/td>\n | Household & packaging foil<\/td>\n<\/tr>\n | ||||||||||||||||||||||||||||||||||||||||||||
| Folha<\/td>\n | O, H14, H18<\/td>\n | Espessura<\/td>\n | 0.2 – 6 mm<\/td>\n | Closure & formed parts<\/td>\n<\/tr>\n | ||||||||||||||||||||||||||||||||||||||||||||
| Barra redonda<\/td>\n | O, H14, H18<\/td>\n | Di\u00e2metro<\/td>\n | 6 – 200 mm<\/td>\n | Cut to length<\/td>\n<\/tr>\n | ||||||||||||||||||||||||||||||||||||||||||||
| Tubo<\/td>\n | O, H14, H18<\/td>\n | Di\u00e2metro externo<\/td>\n | 10 – 200 mm<\/td>\n | Wall 1 – 20 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n8011 Specifications & Equivalent Designations<\/h2>\nComposi\u00e7\u00e3o qu\u00edmica do alum\u00ednio 8011<\/h2>\n
|
Excellent drawability in O temper makes it the default for foil and closure stock.<\/p>\n
Good, clean rolling surface suitable for lamination and printing after treatment.<\/p>\n
Adequate for indoor and packaging use; not intended for aggressive marine service.<\/p>\n
8011 is well suited to slitting, deep drawing, and laminating. Surface treatments such as coating or printing are common for packaging. It is not a structural alloy and should not be specified where high mechanical load is expected.<\/p>\n
Every shipment is accompanied by an MTC report detailing chemical composition and mechanical test results. Third-party inspection and SGS test reports can be arranged on request. Incoming and outgoing inspection covers dimensions, surface condition, and mechanical properties.<\/p>\n
Linsy operates a Shenzhen production base with over 20 years of aluminum manufacturing experience, supplying 1000–8000 series alloys to global B2B buyers. We support custom dimensions, tempers, and processing for both prototype and production volumes.<\/p>\n
Engineering guides and specification references help with alloy selection and design. The external links below are provided for background reading and should be replaced with Linsy-owned content before publication (verify before use).<\/p>\n