{"id":9333,"date":"2025-10-14T12:24:00","date_gmt":"2025-10-14T12:24:00","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&p=9333"},"modified":"2026-07-08T15:01:16","modified_gmt":"2026-07-08T15:01:16","slug":"6201-t81-t6-t4-fio-de-aluminio","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/pt\/produto\/6201-t81-t6-t4-fio-de-aluminio\/","title":{"rendered":"6201-T81\/T6\/T4 Fio de alum\u00ednio"},"content":{"rendered":"

What Is 6201 Aluminum?<\/h2>\n

6201 belongs to the 6000 series (Al-Mg-Si) and is optimized for electrical conductor use rather than general structural work. Compared with the classic 1350 EC grade, 6201 trades some conductivity for substantially higher strength, letting conductors carry heavier mechanical loads with smaller sags. The T81 temper (solution heat treated, cold worked, and artificially aged) delivers the best combination of strength and conductivity for overhead lines.<\/p>\n

Available 6201 Aluminum Products<\/h2>\n

Wire (Primary Form)<\/h3>\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nRange<\/th>\n<\/tr>\n<\/thead>\n
Di\u00e2metro<\/td>\n0.8 – 30 mm<\/td>\n<\/tr>\n
Coil weight<\/td>\nMinimum 50 kg, custom on request<\/td>\n<\/tr>\n
Tempers<\/td>\nO, T4, T6, T81<\/td>\n<\/tr>\n
Size tolerance<\/td>\n\u00b1 2% (typical)<\/td>\n<\/tr>\n
Standards<\/td>\nASTM B398\/B398M, EN 573, GB\/T 3190<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Other Forms on Request<\/h3>\n

6201 is also available as sheet, coil, tube, bar, and profile for non-conductor applications. Share your drawing or spec to receive a quote for these forms.<\/p>\n

Specifications & Equivalent Designations<\/h2>\n\n\n\n\n\n\n\n\n
Designa\u00e7\u00e3o<\/th>\nReference<\/th>\n<\/tr>\n<\/thead>\n
AA \/ UNS<\/td>\nA96201<\/td>\n<\/tr>\n
EN AW<\/td>\nEN AW-6201<\/td>\n<\/tr>\n
Common standards<\/td>\nASTM B398 (wire), ASTM B211, EN 755, GB\/T 3191<\/td>\n<\/tr>\n
Product form focus<\/td>\nDrawn wire for AAAC conductors<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Composi\u00e7\u00e3o qu\u00edmica<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Elemento<\/th>\nContent (wt%)<\/th>\n<\/tr>\n<\/thead>\n
Sil\u00edcio (Si)<\/td>\n0.50 – 0.90<\/td>\n<\/tr>\n
Ferro (Fe)<\/td>\n0.50 max<\/td>\n<\/tr>\n
Cobre (Cu)<\/td>\n0,10 m\u00e1ximo<\/td>\n<\/tr>\n
Mangan\u00eas (Mn)<\/td>\n0.03 max<\/td>\n<\/tr>\n
Magn\u00e9sio (Mg)<\/td>\n0,60 \u2013 0,90<\/td>\n<\/tr>\n
Cromo (Cr)<\/td>\n0,10 m\u00e1ximo<\/td>\n<\/tr>\n
Zinco (Zn)<\/td>\n0,10 m\u00e1ximo<\/td>\n<\/tr>\n
Tit\u00e2nio (Ti)<\/td>\n0.03 max<\/td>\n<\/tr>\n
Others, each<\/td>\n0,05 m\u00e1ximo<\/td>\n<\/tr>\n
Others, total<\/td>\n0,15 m\u00e1ximo<\/td>\n<\/tr>\n
Alum\u00ednio (Al)<\/td>\nEquil\u00edbrio<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Propriedades Mec\u00e2nicas por T\u00eampera<\/h2>\n\n\n\n\n\n\n\n\n
Temperamento<\/th>\nTensile (MPa)<\/th>\nYield (MPa)<\/th>\nAlongamento (%)<\/th>\nShear (MPa)<\/th>\n<\/tr>\n<\/thead>\n
T81<\/td>\n310 min<\/td>\n275 min<\/td>\n8 min<\/td>\n193<\/td>\n<\/tr>\n
T6<\/td>\n300 – 330<\/td>\n260 – 290<\/td>\n8 – 12<\/td>\n185 – 195<\/td>\n<\/tr>\n
T4<\/td>\n200 – 240<\/td>\n110 – 140<\/td>\n12 – 16<\/td>\n150 – 165<\/td>\n<\/tr>\n
O<\/td>\n\u2264 150<\/td>\n\u2264 90<\/td>\n\u2265 18<\/td>\n\u2264 95<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Temper Selection Guide<\/h2>\n

T81<\/h3>\n

Preferred conductor temper. Maximum strength with stable conductivity for overhead AAAC lines.<\/p>\n

T6<\/h3>\n

Good all-round strength for fittings and structural wire where full T81 cold work is not required.<\/p>\n

T4<\/h3>\n

Softer, more formable; used when bending or forming is needed before aging.<\/p>\n

O<\/h3>\n

Annealed, lowest strength; seldom used for conductors but available for special forming.<\/p>\n

Principais caracter\u00edsticas<\/h2>\n

Strength-to-conductivity balance<\/h3>\n

Higher strength than 1350 EC wire while keeping useful conductivity for power transmission.<\/p>\n

Resist\u00eancia \u00e0 corros\u00e3o<\/h3>\n

Good atmospheric and coastal corrosion resistance, suitable for exposed overhead lines.<\/p>\n

Heat treatable<\/h3>\n

Responds to solution heat treatment and aging for controlled temper properties.<\/p>\n

Strandability<\/h3>\n

Uniform drawn wire strands cleanly into compact AAAC conductors.<\/p>\n

Aplicativos<\/h2>\n
    \n
  • Condutores totalmente em liga de alum\u00ednio (AAAC)<\/li>\n
  • Overhead power transmission and distribution lines<\/li>\n
  • Electrical busbars<\/li>\n
  • High-strength electrical fittings<\/li>\n
  • Structural components for utilities<\/li>\n<\/ul>\n

    **Notas sobre Processamento e Acabamento de Superf\u00edcie**<\/h2>\n

    6201 wire is supplied drawn and aged; further cold working or re-aging is not normally required. It can be stranded, baked, and connectorized using standard utility practices. Anodizing is possible for identification but is uncommon on conductors. Welding of finished conductors is generally avoided; mechanical or compression joints are preferred.<\/p>\n

    Documentos de Qualidade e Inspe\u00e7\u00e3o<\/h2>\n

    Every order ships with a Mill Test Certificate (MTC) recording composition and mechanical results. Our quality system is certified to ISO 9001, ISO 14001, and ISO 45001. Third-party SGS test reports can be arranged on request. Inspection covers dimensions, surface condition, and mechanical verification by temper.<\/p>\n

    Why Choose Linsy for 6201 Aluminum<\/h2>\n

    Linsy Aluminum is a Shenzhen-based aluminum manufacturer with more than 20 years of experience supplying the 1000 to 8000 series in plate, bar, tube, wire, coil, profile, and block forms. For 6201 aluminum, we support both off-the-shelf ranges and made-to-order dimensions.<\/p>\n

      \n
    • Certifica\u00e7\u00f5es:<\/strong> ISO 9001, ISO 14001, and ISO 45001 management systems.<\/li>\n
    • Documents:<\/strong> A Mill Test Certificate (MTC) is issued with every order; third-party SGS test reports are available on request.<\/li>\n
    • Processing:<\/strong> In-house CNC machining, TIG\/MIG welding, laser cutting, and surface finishing (anodizing, polishing, mill finish, powder coating, PVC film).<\/li>\n
    • Lead time:<\/strong> Typical custom lead time is 10 to 60 days depending on temper, size, and quantity.<\/li>\n
    • Export:<\/strong> Shipped to 20+ countries across Europe, Asia, the Middle East, Africa, and the Americas.<\/li>\n<\/ul>\n

      **Recursos Relacionados**<\/h2>\n

      See the blog articles linked below for deeper background, and contact our team for a tailored quote on 6201 aluminum.<\/p>\n

      6201 Aluminum FAQ<\/h2>\n

      What conductivity does 6201 wire offer?<\/h3>\n

      6201 typically provides about 52% IACS, lower than 1350 EC wire (about 61% IACS) but with significantly higher strength, which is the reason it is chosen for AAAC.<\/p>\n

      Is T81 better than T6 for overhead lines?<\/h3>\n

      For conductors, T81 is preferred because the cold-work plus age step gives the highest strength at a stable conductivity. T6 is used where full cold work is not required.<\/p>\n

      Can 6201 wire be welded?<\/h3>\n

      Finished conductors are normally joined with compression or mechanical fittings rather than welding. Welding is not standard practice for strand-in-place lines.<\/p>\n

      What coil sizes are available?<\/h3>\n

      Standard coils start at a 50 kg minimum with custom weights on request. Diameter range is 0.8 to 30 mm.<\/p>\n

      FAQ Geral de Pedidos<\/h2>\n

      What is the typical lead time for custom aluminum orders?<\/h3>\n

      Custom sizes and tempers usually ship within 10 to 60 days. Confirm the exact window when you request a quote, as it depends on alloy, temper, dimensions, and order quantity.<\/p>\n

      What is the minimum order quantity (MOQ)?<\/h3>\n

      MOQ is flexible and reviewed case by case. Small lots and prototypes can often be accommodated; larger or standard runs are more economical. Share your required dimensions and quantity for a firm quote.<\/p>\n

      Which quality documents come with the order?<\/h3>\n

      Every order ships with a Mill Test Certificate (MTC). ISO 9001, ISO 14001, and ISO 45001 certifications apply to our management system. SGS third-party test reports can be arranged on request.<\/p>\n

      Can you cut, machine, or finish the material before shipping?<\/h3>\n

      Yes. We provide CNC machining, laser cutting, TIG\/MIG welding, and surface treatments including anodizing, polishing, powder coating, and PVC film protection.<\/p>\n

      How do I request a quote?<\/h3>\n

      Send your alloy\/temper, required form, dimensions, quantity, and any processing or certificate requirements. Our team returns a quote with lead time and shipping terms.<\/p>","protected":false},"excerpt":{"rendered":"

      6201 aluminum wire is a heat-treatable, electrical-grade alloy that balances high mechanical strength with good conductivity and corrosion resistance. Supplied mainly in the T81 temper, it is the standard choice for All Aluminum Alloy Conductors (AAAC) and overhead power lines. Linsy draws 6201 wire in a range of diameters and supports custom coil weights, tempers, and processing for utility and industrial projects.<\/p>\n

      \nFormul\u00e1rios dispon\u00edveis:<\/strong> wire, sheet \/ coil \/ tube \/ bar \/ profile
      \nTemperamentos comuns:<\/strong> T81, T6, T4, O
      \nSuporte ao processamento:<\/strong> CNC machining, laser cutting, TIG\/MIG welding, anodizing, polishing, powder coating
      \nDocumentos de qualidade:<\/strong> MTC report with every order<\/p>","protected":false},"featured_media":2874,"template":"","meta":{"_seopress_titles_title":"6201 Aluminum Wire Supplier \u2014 T4\/T6\/T81 Tempers | Linsy Aluminum","_seopress_titles_desc":"Source 6201 aluminum wire (T4, T6, T81) for AAAC and overhead conductors. High strength with good conductivity, ASTM B398, MTC with every order.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[196],"product_tag":[],"class_list":["post-9333","product","type-product","status-publish","has-post-thumbnail","product_cat-aluminum-wire","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/pt\/wp-json\/wp\/v2\/product\/9333","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/pt\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/pt\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/pt\/wp-json\/wp\/v2\/media\/2874"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/pt\/wp-json\/wp\/v2\/media?parent=9333"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/pt\/wp-json\/wp\/v2\/product_brand?post=9333"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/pt\/wp-json\/wp\/v2\/product_cat?post=9333"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/pt\/wp-json\/wp\/v2\/product_tag?post=9333"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}