{"id":9042,"date":"2025-09-01T01:57:46","date_gmt":"2025-09-01T01:57:46","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&#038;p=9042"},"modified":"2026-07-07T08:32:46","modified_gmt":"2026-07-07T08:32:46","slug":"3003-aluminyum-kare-cubuk","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/tr\/urun\/3003-aluminyum-kare-cubuk\/","title":{"rendered":"3003-O\/H14\/H22 Al\u00fcminyum Kare \u00c7ubuk"},"content":{"rendered":"<h2>What Is 3003 Aluminum Square Bar?<\/h2>\n<p>3003 aluminum square bar is a bar with a square cross-section, made from 3003 Al-Mn (aluminum-manganese) alloy. As a non-heat-treatable wrought alloy, 3003 derives its strength from cold working rather than precipitation hardening. Square bar is typically produced by extrusion (in H112 or F temper) or fabricated by cutting from strain-hardened sheet or plate stock (in H14, H22, or O temper).<\/p>\n<p>With 1.0\u20131.5% manganese as its primary alloying element, 3003 offers approximately 20% higher strength than commercially pure 1100 aluminum while retaining excellent corrosion resistance, formability, and weldability. Square bar is widely specified for structural framing, machining blanks, decorative applications, tank supports, and general fabrication where a square cross-section is required for ease of fixturing, assembly, or aesthetic preference.<\/p>\n<p>Common tempers for 3003 square bar include <strong>O<\/strong> (tamamen tavlanm\u0131\u015f, maksimum \u015fekillendirilebilirlik), <strong>H14<\/strong> (half hard, good balance of strength and workability), and <strong>H22<\/strong> (strain-hardened then partially annealed, stable strength with good formability). Linsy supplies 3003 square bars in these tempers with custom side dimensions, cut-to-length, surface finishing, and MTC reports available for every order.<\/p>\n<h2>Available 3003 Aluminum Square Bar \u2014 Dimensions &amp; Tempers<\/h2>\n<p>Linsy supplies 3003 aluminum square bars in standard and custom sizes. Both metric and imperial dimensions are available. Custom cut-to-length, edge conditioning (chamfered or radiused edges), and surface finishing (mill finish, anodized, or brushed) can be specified at order.<\/p>\n<h3>3003 Aluminum Square Bar \u2014 Standard Dimensions<\/h3>\n<table>\n<thead>\n<tr>\n<th>Side (mm)<\/th>\n<th>Uzunluk (mm)<\/th>\n<th>kg\/m (Approx.)<\/th>\n<th>Yayg\u0131n Temperler<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>5 \u2013 12<\/td>\n<td>1000 \u2013 4000<\/td>\n<td>0.07 \u2013 0.39<\/td>\n<td>O, H14, H22<\/td>\n<\/tr>\n<tr>\n<td>12 \u2013 25<\/td>\n<td>1000 \u2013 5000<\/td>\n<td>0.39 \u2013 1.69<\/td>\n<td>O, H14, H112<\/td>\n<\/tr>\n<tr>\n<td>25 \u2013 50<\/td>\n<td>1000 \u2013 6000<\/td>\n<td>1.69 \u2013 6.75<\/td>\n<td>O, H22, H112, F<\/td>\n<\/tr>\n<tr>\n<td>50 \u2013 60<\/td>\n<td>1000 \u2013 6000<\/td>\n<td>6.75 \u2013 9.72<\/td>\n<td>H112, F<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><em>Note: Side dimension and length can be customized to your drawing or specification. Non-standard sizes and tighter tolerances are available on request. Contact us with your required dimensions for a quick quote.<\/em><\/p>\n<h2>3003 Al\u00fcminyum Spesifikasyonlar\u0131 ve E\u015fde\u011fer Tan\u0131mlamalar<\/h2>\n<p>3003 aluminum square bar is supplied in accordance with major international standards. If your project requires a specific standard or certificate, please specify it when requesting a quote.<\/p>\n<table>\n<thead>\n<tr>\n<th>Standart<\/th>\n<th>Tan\u0131mlama<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>AA (Al\u00fcminyum Birli\u011fi)<\/td>\n<td>3003<\/td>\n<\/tr>\n<tr>\n<td>UNS<\/td>\n<td>A93003<\/td>\n<\/tr>\n<tr>\n<td>EN \/ DIN<\/td>\n<td>EN AW-3003 \/ AlMn1Cu<\/td>\n<\/tr>\n<tr>\n<td>ISO<\/td>\n<td>AlMn1Cu<\/td>\n<\/tr>\n<tr>\n<td>JIS H 4000<\/td>\n<td>A3003<\/td>\n<\/tr>\n<tr>\n<td>GB\/T 3190<\/td>\n<td>3003<\/td>\n<\/tr>\n<tr>\n<td>ASTM B211<\/td>\n<td>3003 \u00e7ubuk, rod ve tel<\/td>\n<\/tr>\n<tr>\n<td>ASTM B221<\/td>\n<td>3003 ekstr\u00fcde \u00e7ubuk, rod, tel, profiller<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>3003 Al\u00fcminyumun Kimyasal Bile\u015fimi<\/h2>\n<p>A\u015fa\u011f\u0131daki kimyasal bile\u015fim limitleri, ASTM B211 ve EN 573-3'e g\u00f6re 3003 al\u00fcminyum i\u00e7in ge\u00e7erlidir. T\u00fcm de\u011ferler a\u011f\u0131rl\u0131k y\u00fczdesidir (%).<\/p>\n<table>\n<thead>\n<tr>\n<th>Element<\/th>\n<th>Min %<\/th>\n<th>Maks %<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Silisyum (Si)<\/td>\n<td>\u2014<\/td>\n<td>0.6<\/td>\n<\/tr>\n<tr>\n<td>Demir (Fe)<\/td>\n<td>\u2014<\/td>\n<td>0.7<\/td>\n<\/tr>\n<tr>\n<td>Bak\u0131r (Cu)<\/td>\n<td>0.05<\/td>\n<td>0.20<\/td>\n<\/tr>\n<tr>\n<td>Manganez (Mn)<\/td>\n<td>1.0<\/td>\n<td>1.5<\/td>\n<\/tr>\n<tr>\n<td>Magnezyum (Mg)<\/td>\n<td>\u2014<\/td>\n<td>0.05<\/td>\n<\/tr>\n<tr>\n<td>Krom (Cr)<\/td>\n<td>\u2014<\/td>\n<td>0.05<\/td>\n<\/tr>\n<tr>\n<td>\u00c7inko (Zn)<\/td>\n<td>\u2014<\/td>\n<td>0.10<\/td>\n<\/tr>\n<tr>\n<td>Titanyum (Ti)<\/td>\n<td>\u2014<\/td>\n<td>0.05<\/td>\n<\/tr>\n<tr>\n<td>Di\u011ferleri Her Biri<\/td>\n<td>\u2014<\/td>\n<td>0.05<\/td>\n<\/tr>\n<tr>\n<td>Di\u011ferleri Toplam<\/td>\n<td>\u2014<\/td>\n<td>0.15<\/td>\n<\/tr>\n<tr>\n<td>Al\u00fcminyum (Al)<\/td>\n<td>\u2014<\/td>\n<td>Denge<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Temperlere G\u00f6re Mekanik \u00d6zellikler<\/h2>\n<p>The mechanical properties of 3003 square bar depend on the temper and the product form (extruded vs. fabricated from plate). The values below are typical for bar stock. Always request an MTC report for certified values on your specific batch.<\/p>\n<h3>3003-O (Tavlanm\u0131\u015f)<\/h3>\n<table>\n<thead>\n<tr>\n<th>M\u00fclkiyet<\/th>\n<th>Tipik De\u011fer<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>\u00c7ekme Dayan\u0131m\u0131 (MPa)<\/td>\n<td>95 \u2013 130<\/td>\n<\/tr>\n<tr>\n<td>Akma Dayan\u0131m\u0131 (MPa)<\/td>\n<td>\u2265 35<\/td>\n<\/tr>\n<tr>\n<td>Uzama (%)<\/td>\n<td>\u2265 25<\/td>\n<\/tr>\n<tr>\n<td>Sertlik (Brinell)<\/td>\n<td>~ 28<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>3003-H14 (Half Hard)<\/h3>\n<table>\n<thead>\n<tr>\n<th>M\u00fclkiyet<\/th>\n<th>Tipik De\u011fer<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>\u00c7ekme Dayan\u0131m\u0131 (MPa)<\/td>\n<td>140 \u2013 180<\/td>\n<\/tr>\n<tr>\n<td>Akma Dayan\u0131m\u0131 (MPa)<\/td>\n<td>\u2265 115<\/td>\n<\/tr>\n<tr>\n<td>Uzama (%)<\/td>\n<td>\u2265 5<\/td>\n<\/tr>\n<tr>\n<td>Sertlik (Brinell)<\/td>\n<td>~ 40<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>3003-H112 (Ekstr\u00fcde Halinde)<\/h3>\n<table>\n<thead>\n<tr>\n<th>M\u00fclkiyet<\/th>\n<th>Tipik De\u011fer<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>\u00c7ekme Dayan\u0131m\u0131 (MPa)<\/td>\n<td>95 \u2013 145<\/td>\n<\/tr>\n<tr>\n<td>Akma Dayan\u0131m\u0131 (MPa)<\/td>\n<td>\u2265 35<\/td>\n<\/tr>\n<tr>\n<td>Uzama (%)<\/td>\n<td>\u2265 18<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>3003 Aluminum Temper Selection Guide for Square Bar<\/h2>\n<p>Select the right temper for your square bar application based on the required strength, formability, and post-machining stability.<\/p>\n<table>\n<thead>\n<tr>\n<th>Temper<\/th>\n<th>A\u00e7\u0131klama<\/th>\n<th>Temel Fayda<\/th>\n<th>When to Use for Square Bar<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>O<\/td>\n<td>Tavlanm\u0131\u015f \u2014 tamamen yumu\u015fak<\/td>\n<td>Maksimum \u015fekillendirilebilirlik ve s\u00fcneklik<\/td>\n<td>Deep forming, bending to tight radii, or where the square bar will undergo extensive welding or machining with chip control<\/td>\n<\/tr>\n<tr>\n<td>H14<\/td>\n<td>Gerilme sertle\u015fmesi uygulanm\u0131\u015f, 1\/2 sert<\/td>\n<td>Mukavemet ve \u015fekillendirilebilirlik aras\u0131nda iyi denge<\/td>\n<td>General fabrication, brackets, structural members that require moderate strength and can be bent to moderate radii<\/td>\n<\/tr>\n<tr>\n<td>H22<\/td>\n<td>Gerilme sertle\u015fmesi uygulanm\u0131\u015f, ard\u0131ndan k\u0131smen tavlanm\u0131\u015f<\/td>\n<td>\u0130yi \u015fekillendirilebilirlikle birlikte stabil mukavemet<\/td>\n<td>Square bar that will be formed after delivery; better long-term stability than H14<\/td>\n<\/tr>\n<tr>\n<td>H112<\/td>\n<td>Ekstr\u00fcde halinde<\/td>\n<td>No special strain-hardening control \u2014 economical<\/td>\n<td>Structural square bar where surface finish and mechanical property consistency are less critical<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Key Characteristics of 3003 Aluminum Square Bar<\/h2>\n<h3>Korozyon Direnci<\/h3>\n<p>3003 aluminum offers excellent resistance to atmospheric corrosion, including in marine and industrial environments. The manganese addition suppresses intergranular corrosion, making 3003 square bar suitable for outdoor structural applications, chemical storage, and marine non-critical parts. It performs well in contact with fresh water, mild chemicals, and food products without requiring a protective coating.<\/p>\n<h3>\u015eekillendirilebilirlik ve Kaynaklanabilirlik<\/h3>\n<p>3003 square bar in O, H14, or H22 temper can be cold bent, drilled, tapped, and machined with standard tooling. It is rated as highly weldable by TIG (GTAW), MIG (GMAW), and resistance welding. Filler metal 4043 or 1100 is recommended. Note that welding anneals the heat-affected zone in strain-hardened tempers, reducing local strength \u2014 consider using O temper bar if extensive welding is planned.<\/p>\n<h3>\u0130\u015flenebilirlik<\/h3>\n<p>3003 has fair machinability \u2014 softer than heat-treatable alloys like 6061 or 2011. Use sharp tools, positive rake angles, and appropriate cutting speeds to avoid built-up edge. O temper machines more smoothly than H14; chip breakers are recommended for continuous cuts. For square bar used as a machining blank, centerless or blanchard grinding may be specified for tighter tolerance surfaces.<\/p>\n<h2>Common Applications of 3003 Aluminum Square Bar<\/h2>\n<table>\n<thead>\n<tr>\n<th>End\u00fcstri<\/th>\n<th>Uygulamalar<\/th>\n<th>Why 3003 Square Bar Is Used<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Kimyasal \u0130\u015fleme<\/td>\n<td>Tank supports, pipe brackets, walkway framing<\/td>\n<td>Korozyon direnci, kaynaklanabilirlik, orta d\u00fczey mukavemet<\/td>\n<\/tr>\n<tr>\n<td>HVAC ve Kanal Sistemleri<\/td>\n<td>Duct framing, equipment stands, mounting bars<\/td>\n<td>Formability, corrosion resistance, workability<\/td>\n<\/tr>\n<tr>\n<td>Genel \u0130malat<\/td>\n<td>Machining blanks, spacers, fixturing, brackets<\/td>\n<td>Square cross-section for easy clamping\/jigging, cost-effective<\/td>\n<\/tr>\n<tr>\n<td>Decorative &amp; Architectural<\/td>\n<td>Trim, railing components, display stands, furniture components<\/td>\n<td>Clean square edges, good surface finish acceptance, formability<\/td>\n<\/tr>\n<tr>\n<td>Depolama ve Ta\u015f\u0131mac\u0131l\u0131k<\/td>\n<td>Cargo tie-down bars, rack supports, trailer trim<\/td>\n<td>Weldability, corrosion resistance, cost-effective<\/td>\n<\/tr>\n<tr>\n<td>Food &amp; Beverage Equipment<\/td>\n<td>Washdown frames, equipment supports, conveyor guides<\/td>\n<td>Food-safe, corrosion resistant, easy to clean<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Processing &amp; Surface Finish Notes for 3003 Square Bar<\/h2>\n<p>Linsy can supply 3003 square bar with processing and finishing options applied before delivery:<\/p>\n<ul>\n<li><strong>Kesme:<\/strong> CNC band saw, circular saw, or waterjet cutting to custom lengths. Standard cut tolerance is \u00b10.5 mm; tighter tolerance is available on request.<\/li>\n<li><strong>\u0130\u015fleme (Tala\u015fl\u0131 \u0130malat):<\/strong> Drilling, tapping, countersinking, slitting, and light CNC milling are available. 3003 machines best in O temper; H14 may work-harden during cutting.<\/li>\n<li><strong>Y\u00fczey Kaplama:<\/strong> Standart olarak haddelenmi\u015f y\u00fczey (mill finish) sunulur. Eloksal (\u015feffaf veya renkli), f\u0131r\u00e7alama ve parlatma se\u00e7enekleri mevcuttur. Not: 3003, manganez i\u00e7eri\u011fi nedeniyle hafif sar\u0131ms\u0131-gri bir tonda eloksallan\u0131r (6061'in parlak g\u00fcm\u00fc\u015f\u00fc gibi de\u011fil) \u2014 bu normaldir ve hatal\u0131 bir eloksal katman\u0131n\u0131 g\u00f6stermez.<\/li>\n<li><strong>Edge Conditioning:<\/strong> Sharp corners can be chamfered or radiused on request to improve handling safety and appearance.<\/li>\n<li><strong>\u015eekillendirme:<\/strong> O temper square bar can be bent to tight radii without cracking. H14 temper can be bent to moderate radii; always test-bend a sample for tight-bend applications.<\/li>\n<li><strong>Kaynak:<\/strong> 3003 square bar is fully weldable. Post-weld annealing is not required for O temper; H14 and H22 parts may soften in the heat-affected zone after welding.<\/li>\n<\/ul>\n<h2>Kalite Belgeleri ve Denetim<\/h2>\n<p>Linsy provides the following quality documentation with every 3003 square bar order:<\/p>\n<ul>\n<li><strong>MTC Raporu (Malzeme Test Sertifikas\u0131):<\/strong> Her sevkiyata standart olarak dahildir. Parti baz\u0131nda kimyasal bile\u015fim ve mekanik \u00f6zellikleri belgeler.<\/li>\n<li><strong>SGS Test Raporlar\u0131:<\/strong> Malzeme \u00f6zelliklerinin \u00fc\u00e7\u00fcnc\u00fc taraf do\u011frulamas\u0131 i\u00e7in talep \u00fczerine sunulur.<\/li>\n<li><strong>Boyut Muayene Raporu:<\/strong> Hassas veya g\u00fcvenlik a\u00e7\u0131s\u0131ndan kritik uygulamalar i\u00e7in talep \u00fczerine sunulur.<\/li>\n<li><strong>RoHS \/ REACH Uygunlu\u011fu:<\/strong> Malzemenin AB direktiflerine uygunlu\u011funu do\u011frulayan belge talep \u00fczerine sunulur.<\/li>\n<\/ul>\n<p>T\u00fcm Linsy tesisleri <strong>ISO 9001, ISO 14001 ve ISO 45001<\/strong>. sertifikalar\u0131na sahiptir. De\u011firmen test sertifikalar\u0131, \u00fcretimde kullan\u0131lan ge\u00e7erli ASTM veya EN standard\u0131na at\u0131fta bulunur.<\/p>\n<h2>Why Choose Linsy for 3003 Aluminum Square Bar<\/h2>\n<ul>\n<li><strong>ISO Sertifikal\u0131 Kalite:<\/strong> All Linsy production facilities are certified under ISO 9001, ISO 14001, and ISO 45001. Every square bar shipment includes an MTC report as standard.<\/li>\n<li><strong>\u00d6zel Ebatlar ve D\u00fc\u015f\u00fck MOQ:<\/strong> From prototype quantities to full production runs. Custom side dimensions, lengths, and surface finishes are available even at low order volumes.<\/li>\n<li><strong>Geni\u015f Temper Bulunabilirli\u011fi:<\/strong> O, H14, H22, H112 ve F temperleri stokta veya k\u0131sa teslim s\u00fcresiyle temin edilebilir. Projeniz i\u00e7in temperden \u00f6d\u00fcn vermenize gerek yoktur.<\/li>\n<li><strong>\u0130\u015fleme Hizmetleri:<\/strong> Boy kesme, CNC i\u015fleme, y\u00fczey kaplama ve kaynak deste\u011fi \u015firket i\u00e7inde sunulmaktad\u0131r \u2014 bu, sonraki s\u00fcre\u00e7lerinizi ve teslim s\u00fcrenizi azalt\u0131r.<\/li>\n<li><strong>K\u00fcresel Teslimat:<\/strong> Spesifikasyona ve sipari\u015f hacmine ba\u011fl\u0131 olarak 10\u201360 g\u00fcn teslim s\u00fcresi. \u0130hracat standartlar\u0131na uygun paketleme ile 20'den fazla \u00fclkeye sevkiyat yap\u0131l\u0131r.<\/li>\n<li><strong>Teknik Destek:<\/strong> Linsy engineers can assist with temper selection, formability assessment, and welding recommendations for your specific square bar application.<\/li>\n<\/ul>\n<h2>\u0130lgili Kaynaklar<\/h2>\n<ul>\n<li><a href=\"https:\/\/premiumalu.com\/tr\/3003-alumi%cc%87nyum-alasiminda-uzmanlasmak-i%cc%87ci%cc%87n-kapsamli-bi%cc%87r-rehber\/\">3003 Al\u00fcminyum Ala\u015f\u0131m\u0131 Nihai Rehberi<\/a><\/li>\n<li><a href=\"https:\/\/premiumalu.com\/tr\/mukemmel-alumi%cc%87nyum-alasimi-3003-h14u-bugun-bulun\/\">3003 H14 Al\u00fcminyum i\u00e7in Nihai K\u0131lavuz<\/a><\/li>\n<li><a href=\"https:\/\/premiumalu.com\/tr\/mukemmel-alumi%cc%87nyum-levha-seci%cc%87mi%cc%87-3104-vs-3003-vs-3004-alasimlari\/\">Choosing the Perfect Aluminum Sheet: 3104 vs 3003 vs 3004 Alloys<\/a><\/li>\n<li><a href=\"https:\/\/premiumalu.com\/tr\/3003-vs-6061-derinlemesine-kapsamli-karsilastirma\/\">3003 vs 6061 Al\u00fcminyum \u2014 Derinlemesine Kar\u015f\u0131la\u015ft\u0131rma<\/a><\/li>\n<\/ul>\n<h2>3003 Aluminum Square Bar FAQ<\/h2>\n<dl>\n<dt>What is the difference between 3003-H14 and 3003-H22 square bar?<\/dt>\n<dd>H14 yaln\u0131zca gerilimle sertle\u015ftirilmi\u015ftir (daha y\u00fcksek mukavemet, daha az \u015fekillendirilebilirlik). H22, gerilimle sertle\u015ftirilmi\u015f ve ard\u0131ndan k\u0131smen tavlanm\u0131\u015ft\u0131r (hafif daha d\u00fc\u015f\u00fck mukavemet, daha iyi \u015fekillendirilebilirlik ve stabilite). Bar teslimattan sonra \u015fekillendirilecekse H22'yi se\u00e7in.<\/dd>\n<dt>What side dimensions are available for 3003 square bar?<\/dt>\n<dd>Standard side dimensions range from 5 mm to 60 mm. Custom sizes up to 100 mm and beyond can be produced by extrusion to your specification. Contact us with your required dimensions for availability and lead time.<\/dd>\n<dt>Can 3003 square bar be used outdoors or in marine environments?<\/dt>\n<dd>3003 has good atmospheric corrosion resistance and is suitable for outdoor and non-immersed marine applications (handrails, brackets, enclosures). For immersed saltwater service, 5052 or 5083 is recommended due to superior pitting resistance.<\/dd>\n<dt>What filler wire should I use when welding 3003 square bar?<\/dt>\n<dd>3003'\u00fcn TIG ve MIG kayna\u011f\u0131 i\u00e7in 4043 veya 1100 dolgu teli \u00f6nerilir. 4043, eloksal sonras\u0131 daha iyi renk uyumu sa\u011flar; kaynak b\u00f6lgesinde maksimum korozyon direnci gerekti\u011finde 1100 tercih edilir.<\/dd>\n<dt>What is the typical lead time for custom 3003 square bar sizes?<\/dt>\n<dd>Standard sizes are available from stock or with 10\u201360 days lead time. Custom side dimensions or non-standard tempers typically ship within 15\u201345 days depending on volume. Contact us for a lead time estimate on your specific requirement.<\/dd>\n<dt>Does 3003 square bar come with mill test certification?<\/dt>\n<dd>Yes \u2014 every Linsy 3003 square bar shipment includes an MTC (Material Test Certificate) as standard, documenting chemical composition and mechanical properties for the production batch.<\/dd>\n<dt>Can 3003 square bar be anodized for architectural or decorative use?<\/dt>\n<dd>Yes. Note that 3003 anodizes to a slightly yellowish-grey tone rather than the bright silver of anodized 6061, due to its manganese content. For a specific color match in architectural applications, request an anodizing sample before ordering in volume.<\/dd>\n<dt>What is the weight of 3003 square bar? How do I calculate it?<\/dt>\n<dd>Approximate weight is calculated as: side (mm) \u00d7 side (mm) \u00f7 1000 \u00d7 2.7 = kg\/m. For example, a 20 mm square bar weighs approximately 1.08 kg\/m. Request an MTC report for exact weight values on your batch.<\/dd>\n<\/dl>\n<h2>Genel Sipari\u015f SSS<\/h2>\n<dl>\n<dt>What is the minimum order quantity (MOQ) for 3003 square bar?<\/dt>\n<dd>Linsy, standart temperler ve ebatlar i\u00e7in d\u00fc\u015f\u00fck MOQ destekler. \u00d6zel ebatlar veya temperler daha y\u00fcksek minimum miktarlar gerektirebilir. Spesifik bir MOQ teklifi i\u00e7in gereksinimlerinizle birlikte bizimle ileti\u015fime ge\u00e7in.<\/dd>\n<dt>Tam \u00fcretim \u00f6ncesinde prototip i\u00e7in k\u00fc\u00e7\u00fck miktarda sipari\u015f verebilir miyim?<\/dt>\n<dd>Evet \u2014 Linsy, prototip ve k\u00fc\u00e7\u00fck parti sipari\u015flerini memnuniyetle kar\u015f\u0131lar. Bir\u00e7ok standart ebat, an\u0131nda sevkiyat i\u00e7in stokta mevcuttur.<\/dd>\n<dt>What packaging is used for 3003 square bar exports?<\/dt>\n<dd>\u0130hracat standart paketlemesi; PVC sarg\u0131, u\u00e7 kapaklar\u0131 ve deniz veya hava ta\u015f\u0131mac\u0131l\u0131\u011f\u0131na uygun ah\u015fap kasalar veya paletler i\u00e7erir. Y\u00fcksek de\u011ferli veya hassas y\u00fczeyli sipari\u015fler i\u00e7in \u00f6zel paketleme mevcuttur.<\/dd>\n<dt>Linsy, AB veya Kuzey Amerika projeleri i\u00e7in malzeme sertifikas\u0131 sa\u011fl\u0131yor mu?<\/dt>\n<dd>Evet \u2014 MTC raporlar\u0131 standart olarak sunulur. SGS test raporlar\u0131, RoHS\/REACH uygunluk sertifikalar\u0131 ve EN 10204 3.1 \/ 3.2 sertifikasyonu talep \u00fczerine temin edilebilir.<\/dd>\n<dt>Can Linsy supply 3003 square bar cut to a specific length?<\/dt>\n<dd>Yes \u2014 cut-to-length is a standard service. Provide your required length and tolerance when requesting a quote.<\/dd>\n<dt>What information should I include in my inquiry for 3003 square bar?<\/dt>\n<dd>Please include: alloy (3003), temper (O\/H14\/H22\/etc.), side dimension (mm), length (mm), quantity (pieces or weight), required standard (ASTM\/EN\/GB), and any surface finish or processing requirements.<\/dd>\n<\/dl>","protected":false},"excerpt":{"rendered":"<p>3003 aluminum square bar is a non-heat-treatable Al-Mn alloy bar with a square cross-section, widely used in structural framing, machining blanks, decorative trim, chemical equipment supports, and general fabrication. It offers excellent corrosion resistance, good formability and weldability, and moderate strength \u2014 approximately 20% stronger than 1100 aluminum. Linsy supplies 3003 square bars in tempers O, H14, H22, H112, and F, with custom side dimensions, cut-to-length service, surface finishing options, and MTC reports included with every order.<\/p>\n<p>\n<strong>Mevcut formlar:<\/strong> square bar \/ rectangular bar<br \/>\n<strong>Yayg\u0131n temperler:<\/strong> O \/ H14 \/ H22 \/ H112 \/ F<br \/>\n<strong>\u0130\u015fleme deste\u011fi:<\/strong> boya kesim \/ CNC i\u015fleme \/ TIG &amp; MIG kaynak \/ eloksal \/ f\u0131r\u00e7alama \/ parlatma<br \/>\n<strong>Kalite belgeleri:<\/strong> Her sipari\u015fte MTC raporu, talep \u00fczerine SGS testi<\/p>","protected":false},"featured_media":9072,"template":"","meta":{"_seopress_titles_title":"3003 Aluminum Square Bar \u2014 O\/H14\/H22\/H112 Custom Supplier | Linsy Aluminum","_seopress_titles_desc":"Source 3003 aluminum square bar (AlMn1Cu) in O, H14, H22, H112 tempers. Custom side dimensions, MTC report included, ISO 9001 certified. Cut-to-length and machining services available.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[193],"product_tag":[],"class_list":["post-9042","product","type-product","status-publish","has-post-thumbnail","product_cat-aluminum-square-bar","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/tr\/wp-json\/wp\/v2\/product\/9042","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/tr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/tr\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/tr\/wp-json\/wp\/v2\/media\/9072"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/tr\/wp-json\/wp\/v2\/media?parent=9042"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/tr\/wp-json\/wp\/v2\/product_brand?post=9042"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/tr\/wp-json\/wp\/v2\/product_cat?post=9042"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/tr\/wp-json\/wp\/v2\/product_tag?post=9042"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}