{"id":2920,"date":"2024-06-01T02:39:17","date_gmt":"2024-06-01T02:39:17","guid":{"rendered":"https:\/\/premiumalu.com\/?post_type=product&#038;p=2920"},"modified":"2026-07-07T08:32:48","modified_gmt":"2026-07-07T08:32:48","slug":"1350-%e9%93%9d%e5%90%88%e9%87%91","status":"publish","type":"product","link":"https:\/\/premiumalu.com\/zh\/%e4%ba%a7%e5%93%81\/1350-%e9%93%9d%e5%90%88%e9%87%91\/","title":{"rendered":"1350 \u94dd\u5408\u91d1"},"content":{"rendered":"<h2>What Is 1350 Aluminum Alloy?<\/h2>\n<p>1350 aluminum alloy (UNS A91350) is a commercially pure aluminum grade with a minimum aluminum content of 99.5%. Classified as a 1000 series alloy, 1350 is not heat-treatable and derives its strength through strain hardening (H tempers). It is the primary alloy designation for electrical conductor applications in North America, offering excellent electrical conductivity\u2014typically approximately 62% IACS in the H12 temper\u2014along with good corrosion resistance and high formability. Linsy supplies 1350 aluminum in sheet, coil, plate, bar, tube, wire, and custom profiles in tempers O, H12, H14, H16, and H18, with MTC reports available for every order.<\/p>\n<p>1350 is specified under several key standards including ASTM B230\/B230M (aluminum 1350 drawn wire for electrical purposes), ASTM B233 (aluminum 1350 bus conductor), ASTM B609 (aluminum 1350 sheet and plate for electrical bus), and ASTM B491 (aluminum 1350 extruded tube for electrical bus). It is also designated as EN AW-1350 (Al99.5) under European standards.<\/p>\n<h2>Available 1350 Aluminum Products<\/h2>\n<p>Linsy supplies 1350 aluminum in the full range of standard and custom product forms. Length, width, and dimensional tolerances can be tailored to your project requirements. As 1350 is a pure aluminum grade supplied in strain-hardened tempers (O, H12, H14, H16, H18), typical applications favor formability and electrical conductivity over high mechanical strength.<\/p>\n<h3>1350 Aluminum Sheet &amp; Coil<\/h3>\n<table>\n<thead>\n<tr>\n<th>\u5f62\u5f0f<\/th>\n<th>\u813e\u6c14<\/th>\n<th>\u539a\u5ea6\uff08\u6beb\u7c73\uff09<\/th>\n<th>\u5bbd\u5ea6\uff08\u6beb\u7c73\uff09<\/th>\n<th>\u957f\u5ea6\uff08\u6beb\u7c73\uff09<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1350 Sheet \/ Coil<\/td>\n<td>O\u3001H12\u3001H14\u3001H16\u3001H18<\/td>\n<td>0.3 \u2013 6.0<\/td>\n<td>500 \u2013 2600<\/td>\n<td>500 \u2013 16000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>1350 Aluminum Plate<\/h3>\n<table>\n<thead>\n<tr>\n<th>\u5f62\u5f0f<\/th>\n<th>\u813e\u6c14<\/th>\n<th>\u539a\u5ea6\uff08\u6beb\u7c73\uff09<\/th>\n<th>\u5bbd\u5ea6\uff08\u6beb\u7c73\uff09<\/th>\n<th>\u957f\u5ea6\uff08\u6beb\u7c73\uff09<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1350 Plate<\/td>\n<td>O, H12, H14, H112<\/td>\n<td>6.0 \u2013 80<\/td>\n<td>500 \u2013 2600<\/td>\n<td>500 \u2013 16000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>1350 Aluminum Bar<\/h3>\n<table>\n<thead>\n<tr>\n<th>\u5f62\u5f0f<\/th>\n<th>\u813e\u6c14<\/th>\n<th>\u76f4\u5f84\uff08\u6beb\u7c73\uff09<\/th>\n<th>\u957f\u5ea6\uff08\u6beb\u7c73\uff09<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1350 Round Bar<\/td>\n<td>O, H12, H14<\/td>\n<td>6 \u2013 300<\/td>\n<td>1000 \u2013 6000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>1350 Aluminum Tube<\/h3>\n<table>\n<thead>\n<tr>\n<th>\u5f62\u5f0f<\/th>\n<th>\u813e\u6c14<\/th>\n<th>\u5916\u5f84\uff08\u6beb\u7c73\uff09<\/th>\n<th>\u58c1\u539a\uff08\u6beb\u7c73\uff09<\/th>\n<th>\u957f\u5ea6\uff08\u6beb\u7c73\uff09<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1350 Tube<\/td>\n<td>O, H12<\/td>\n<td>6 \u2013 300<\/td>\n<td>1 \u2013 50<\/td>\n<td>1000 \u2013 6000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>1350 Aluminum Wire<\/h3>\n<table>\n<thead>\n<tr>\n<th>\u5f62\u5f0f<\/th>\n<th>\u813e\u6c14<\/th>\n<th>\u76f4\u5f84\uff08\u6beb\u7c73\uff09<\/th>\n<th>\u91cd\u91cf\/\u7ebf\u5708<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1350 Wire \/ Rod<\/td>\n<td>O, H12, H14, H19<\/td>\n<td>0.8 \u2013 20<\/td>\n<td>\u81f3\u5c11 50 \u516c\u65a4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>\u8bf7\u6ce8\u610f\uff1a<\/strong> All dimensions can be customized. Contact us with your required specifications for a quotation.<\/p>\n<h2>1350 Aluminum Specifications &amp; Equivalent Designations<\/h2>\n<table>\n<thead>\n<tr>\n<th>\u6807\u51c6<\/th>\n<th>\u540d\u79f0<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>UNS<\/td>\n<td>A91350<\/td>\n<\/tr>\n<tr>\n<td>AA\uff08\u94dd\u4e1a\u534f\u4f1a\uff09<\/td>\n<td>1350<\/td>\n<\/tr>\n<tr>\n<td>EN\uff08\u6b27\u6d32\uff09<\/td>\n<td>EN AW-1350 \/ Al99.5<\/td>\n<\/tr>\n<tr>\n<td>\u56fd\u9645\u6807\u51c6\u5316\u7ec4\u7ec7<\/td>\n<td>Al99.5<\/td>\n<\/tr>\n<tr>\n<td>\u7f8e\u56fd\u6750\u6599\u4e0e\u8bd5\u9a8c\u534f\u4f1a<\/td>\n<td>B230, B233, B609, B491<\/td>\n<\/tr>\n<tr>\n<td>Common alternative names<\/td>\n<td>Al99.5, EC aluminum, electrical conductor aluminum<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>1350 \u94dd\u7684\u5316\u5b66\u6210\u5206<\/h2>\n<table>\n<thead>\n<tr>\n<th>\u8981\u7d20<\/th>\n<th>\u5185\u5bb9 (%)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>\u94dd (Al)<\/td>\n<td>99.50 min<\/td>\n<\/tr>\n<tr>\n<td>\u7845 (Si)<\/td>\n<td>\u6700\u5927 0.10<\/td>\n<\/tr>\n<tr>\n<td>\u94c1\uff08Fe\uff09<\/td>\n<td>0.40\uff08\u4e0a\u9650\uff09<\/td>\n<\/tr>\n<tr>\n<td>\u94dc (Cu)<\/td>\n<td>0.05 \u6700\u5927\u503c<\/td>\n<\/tr>\n<tr>\n<td>\u9530 (Mn)<\/td>\n<td>0.01 max<\/td>\n<\/tr>\n<tr>\n<td>\u9541\uff08Mg\uff09<\/td>\n<td>0.01 max<\/td>\n<\/tr>\n<tr>\n<td>\u950c (Zn)<\/td>\n<td>0.05 \u6700\u5927\u503c<\/td>\n<\/tr>\n<tr>\n<td>\u949b (Ti)<\/td>\n<td>0.02 max<\/td>\n<\/tr>\n<tr>\n<td>\u9492 (V)<\/td>\n<td>0.05 \u6700\u5927\u503c<\/td>\n<\/tr>\n<tr>\n<td>\u9553\uff08Ga\uff09<\/td>\n<td>\u6700\u59270.03<\/td>\n<\/tr>\n<tr>\n<td>\u5176\u4ed6\uff08\u6bcf\u9879\uff09<\/td>\n<td>\u6700\u59270.03<\/td>\n<\/tr>\n<tr>\n<td>\u5176\u4ed6\uff08\u5171\u8ba1\uff09<\/td>\n<td>\u6700\u5927 0.10<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The high aluminum content (99.5% minimum) is what gives 1350 its excellent electrical conductivity. Iron and silicon are the most significant impurities; their levels are controlled to maintain conductivity while allowing sufficient formability for drawing and forming operations.<\/p>\n<h2>\u4e0d\u540c\u56de\u706b\u72b6\u6001\u4e0b\u7684\u529b\u5b66\u6027\u80fd<\/h2>\n<table>\n<thead>\n<tr>\n<th>\u813e\u6c14<\/th>\n<th>\u62c9\u4f38\u5f3a\u5ea6\uff08\u5146\u5e15\uff09<\/th>\n<th>\u5c48\u670d\u5f3a\u5ea6\uff08\u5146\u5e15\uff09<\/th>\n<th>\u4f38\u957f\u7387 (%)<\/th>\n<th>\u5178\u578b\u7528\u9014<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>O\uff08\u9000\u706b\uff09<\/td>\n<td>55 \u2013 83<\/td>\n<td>20 \u2013 34<\/td>\n<td>15 \u2013 35<\/td>\n<td>Maximum formability, busbar forming<\/td>\n<\/tr>\n<tr>\n<td>H12 (1\/4 hard)<\/td>\n<td>90 \u2013 110<\/td>\n<td>70 \u2013 95<\/td>\n<td>5 \u2013 15<\/td>\n<td>Electrical busbars, general forming<\/td>\n<\/tr>\n<tr>\n<td>H14 (1\/2 hard)<\/td>\n<td>110 \u2013 130<\/td>\n<td>90 \u2013 110<\/td>\n<td>3 \u2013 8<\/td>\n<td>Structural bus, stamped parts<\/td>\n<\/tr>\n<tr>\n<td>H16 (3\/4 hard)<\/td>\n<td>125 \u2013 150<\/td>\n<td>105 \u2013 125<\/td>\n<td>2 \u2013 5<\/td>\n<td>Wire drawing stock, formed parts<\/td>\n<\/tr>\n<tr>\n<td>H18 (Full hard)<\/td>\n<td>150 \u2013 180<\/td>\n<td>125 \u2013 145<\/td>\n<td>1 \u2013 3<\/td>\n<td>Drawn wire, rigid bus supports<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>Electrical conductivity:<\/strong> Approximately 61.0 \u2013 62.5% IACS (International Annealed Copper Standard) depending on temper and impurity levels. H12 temper is the most common condition for electrical bus conductor applications.<\/p>\n<h2>\u786c\u5ea6\u9009\u62e9\u6307\u5357<\/h2>\n<table>\n<thead>\n<tr>\n<th>\u813e\u6c14<\/th>\n<th>\u4e3b\u8981\u7279\u70b9<\/th>\n<th>\u6700\u9002\u5408<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>O<\/td>\n<td>Fully annealed, maximum ductility, lowest strength<\/td>\n<td>Complex forming operations, busbar bending<\/td>\n<\/tr>\n<tr>\n<td>H12<\/td>\n<td>1\/4 hard, good balance of formability and strength, optimal electrical conductivity<\/td>\n<td>Electrical busbars, general electrical fabrication<\/td>\n<\/tr>\n<tr>\n<td>H14<\/td>\n<td>1\/2 hard, higher strength with moderate formability<\/td>\n<td>Structural bus bars, stamped electrical components<\/td>\n<\/tr>\n<tr>\n<td>H16<\/td>\n<td>3\/4 hard, good strength, limited formability<\/td>\n<td>Wire drawing preparation, rigid bus supports<\/td>\n<\/tr>\n<tr>\n<td>H18<\/td>\n<td>Full hard, highest strength, lowest ductility<\/td>\n<td>Drawn wire, final-form electrical conductors<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Key Characteristics of 1350 Aluminum<\/h2>\n<h3>Excellent Electrical Conductivity<\/h3>\n<p>1350 aluminum is the standard grade for electrical conductor applications in North America. With typical electrical conductivity of 61\u201363% IACS, it provides a cost-effective alternative to copper in power distribution, electrical bus systems, and transformer windings. The conductivity is optimized in the H12 temper, which is the standard supply condition for electrical bus applications.<\/p>\n<h3>\u8010\u8150\u8680\u6027<\/h3>\n<p>As a pure aluminum grade, 1350 offers very good corrosion resistance in atmospheric and many chemical environments. A protective oxide layer forms naturally on the surface, providing long-term durability in indoor and outdoor electrical installations. For harsh environments, anodizing can provide additional protection.<\/p>\n<h3>\u6210\u578b\u6027<\/h3>\n<p>1350 aluminum in the O and H12 tempers exhibits excellent formability. It can be bent, stamped, spun, and drawn without difficulty. This makes it well-suited for busbar fabrication, where complex bending operations are routinely required. The O temper provides maximum formability; H12 offers a practical balance for most busbar applications.<\/p>\n<h3>\u4e0d\u53ef\u70ed\u5904\u7406<\/h3>\n<p>1350 aluminum is a strain-hardening alloy. Strength is developed through cold working (H tempers), not heat treatment. This simplifies processing and allows for custom strain-hardened tempers to be specified for specific forming or strength requirements.<\/p>\n<h2>\u5e38\u89c1\u5e94\u7528<\/h2>\n<table>\n<thead>\n<tr>\n<th>Industry \/ Sector<\/th>\n<th>\u5178\u578b\u5e94\u7528<\/th>\n<th>Why 1350 Is Used<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Electrical Power Distribution<\/td>\n<td>Busbars, bus ducts, electrical switchgear components<\/td>\n<td>High electrical conductivity, good formability for busbar bending<\/td>\n<\/tr>\n<tr>\n<td>Transformers<\/td>\n<td>Transformer windings, coil wire<\/td>\n<td>Consistent electrical properties, drawable to fine wire<\/td>\n<\/tr>\n<tr>\n<td>Electrical Wiring<\/td>\n<td>Overhead conductor wire, building wire (in appropriate designs)<\/td>\n<td>Lightweight, good conductivity, lower material cost vs. copper<\/td>\n<\/tr>\n<tr>\n<td>\u901a\u7528\u5de5\u7a0b<\/td>\n<td>Pins, rivets, fasteners, wire shapes, clips<\/td>\n<td>Good formability, corrosion resistance, low cost<\/td>\n<\/tr>\n<tr>\n<td>\u70ed\u4ea4\u6362\u5668<\/td>\n<td>Fin stock, heat transfer plates<\/td>\n<td>Pure aluminum grade, good thermal conductivity<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>\u52a0\u5de5\u4e0e\u8868\u9762\u5904\u7406\u8bf4\u660e<\/h2>\n<p>Linsy provides in-house processing and surface treatment services for 1350 aluminum products. As a pure, non-heat-treatable alloy, 1350 is straightforward to process, but the following notes apply:<\/p>\n<ul>\n<li><strong>Cutting &amp; Machining:<\/strong> 1350 machines well in H12\u2013H18 tempers. CNC machining, laser cutting, and precision sawing are available for custom busbar and component fabrication.<\/li>\n<li><strong>Forming &amp; Bending:<\/strong> O and H12 tempers offer excellent bend characteristics. Minimum bend radii should be confirmed for H14\u2013H18 tempers to avoid cracking.<\/li>\n<li><strong>\u710a\u63a5\uff1a<\/strong> 1350 can be welded using TIG or MIG processes with 1350 or 4043 filler wire. As a non-heat-treatable alloy, weld strength is not reduced by heat-affected zone softening (unlike heat-treatable alloys). Post-weld annealing may be used to restore maximum ductility if required.<\/li>\n<li><strong>\u9633\u6781\u6c27\u5316\uff1a<\/strong> 1350 anodizes to a clear or slightly gray finish. As a pure grade, the anodized layer is uniform but may show minor variation due to impurity levels. For decorative anodizing, 1350 is less commonly specified than 5000 or 6000 series alloys.<\/li>\n<li><strong>Surface finish options:<\/strong> Mill finish (standard), anodized, polished, PVC protective film. Powder coating (RAL 9016) is available on request.<\/li>\n<\/ul>\n<h2>\u8d28\u91cf\u6587\u4ef6\u4e0e\u68c0\u9a8c<\/h2>\n<p>Linsy issues an MTC (Material Test Certificate) report with every 1350 aluminum order, documenting chemical composition, mechanical properties, and dimensional inspection results. The following additional quality documents are available:<\/p>\n<ul>\n<li><strong>MTC report:<\/strong> Issued per order, includes composition analysis and mechanical test results.<\/li>\n<li><strong>SGS\u6d4b\u8bd5\u62a5\u544a\uff1a<\/strong> Available on request (additional testing cost applies). Available report types include SGS Chemical Composition Report, SGS Mechanical Properties Report, SGS Dimensional Inspection Report, and SGS RoHS + REACH Report.<\/li>\n<li><strong>\u5c3a\u5bf8\u68c0\u9a8c\uff1a<\/strong> Full dimensional reports available for precision busbar and custom-machined components.<\/li>\n<li><strong>Traceability:<\/strong> Material traceability is maintained from raw aluminum ingot to finished product.<\/li>\n<\/ul>\n<h2>Why Choose Linsy for 1350 Aluminum<\/h2>\n<p>Linsy Aluminum is a Shenzhen-based aluminum factory with more than 20 years of industry experience. We specialize in supplying a full range of aluminum alloys in standard and custom specifications, with particular capability in pure aluminum grades for electrical and general engineering applications.<\/p>\n<ul>\n<li><strong>ISO-certified quality:<\/strong> Linsy operates under ISO 9001, ISO 14001, and ISO 45001 certified management systems.<\/li>\n<li><strong>Broad product coverage:<\/strong> 1350 aluminum is supplied in sheet, coil, plate, bar, tube, wire, and custom profiles to match your project requirements.<\/li>\n<li><strong>Custom sizes and tempers:<\/strong> Low-MOQ custom production is available for non-stock items, with typical lead time of 10\u201360 days depending on alloy, dimensions, and processing requirements.<\/li>\n<li><strong>\u5185\u90e8\u5904\u7406\uff1a<\/strong> CNC machining, laser cutting, TIG and MIG welding, anodizing, polishing, and PVC film application are available in-house to support finished-component supply.<\/li>\n<li><strong>\u8d28\u91cf\u6587\u4ef6\uff1a<\/strong> MTC report provided with every order. SGS test reports are available on request.<\/li>\n<li><strong>Inventory and delivery:<\/strong> Broad stock coverage across multiple product forms, with faster response for common specifications and project purchasing requirements.<\/li>\n<\/ul>\n<h2>\u76f8\u5173\u8d44\u6e90<\/h2>\n<p>Learn more about 1350 aluminum properties and applications in our detailed guide:<\/p>\n<ul>\n<li><a href=\"https:\/\/premiumalu.com\/zh\/1350-%e9%93%9d%e7%9a%84%e7%89%b9%e6%80%a7%e5%92%8c%e5%ba%94%e7%94%a8%e8%af%b4%e6%98%8e\/\">1350 \u94dd\u7684\u57fa\u672c\u89c1\u89e3\uff1a\u4e13\u5bb6\u6307\u5357<\/a><\/li>\n<\/ul>\n<h2>1350 Aluminum FAQ<\/h2>\n<dl>\n<dt>What is 1350 aluminum alloy used for?<\/dt>\n<dd>1350 aluminum is primarily used for electrical applications including busbars, transformer windings, and electrical conductor wire. It is also used for pins, rivets, fasteners, and general engineering components where high formability and corrosion resistance are required rather than high strength.<\/dd>\n<dt>Is 1350 aluminum heat-treatable?<\/dt>\n<dd>No. 1350 is a non-heat-treatable, commercially pure aluminum alloy. Strength is developed through strain hardening (H12, H14, H16, H18 tempers) or by supplying in the fully annealed O temper for maximum formability.<\/dd>\n<dt>What is the electrical conductivity of 1350 aluminum?<\/dt>\n<dd>1350 aluminum typically offers electrical conductivity of 61\u201363% IACS (International Annealed Copper Standard), depending on temper and impurity levels. The H12 temper is the standard condition for electrical bus conductor applications and provides optimal conductivity.<\/dd>\n<dt>What tempers are available for 1350 aluminum?<\/dt>\n<dd>Linsy supplies 1350 aluminum in O (annealed), H12 (1\/4 hard), H14 (1\/2 hard), H16 (3\/4 hard), and H18 (full hard) tempers. H12 is the most common temper for electrical busbar applications.<\/dd>\n<dt>Can 1350 aluminum wire be drawn to fine sizes?<\/dt>\n<dd>Yes. 1350 is the standard alloy for aluminum electrical wire and is readily drawable to fine wire sizes. Linsy supplies 1350 wire in diameters from 0.8 mm to 20 mm in O, H12, H14, and H19 tempers.<\/dd>\n<dt>Do you provide MTC for 1350 aluminum orders?<\/dt>\n<dd>Yes. Linsy issues an MTC (Material Test Certificate) report with every order, documenting chemical composition, mechanical properties, and dimensional inspection results. SGS test reports are available on request with additional testing cost.<\/dd>\n<dt>What is the difference between 1350 and 1100 aluminum?<\/dt>\n<dd>Both are pure aluminum grades, but 1350 is specifically controlled for electrical conductivity (max Si 0.10%, max Cu 0.05%) and is the standard grade for electrical applications. 1100 allows higher Si and Cu and is more commonly used for general sheet metal and forming applications where electrical conductivity is not the primary requirement.<\/dd>\n<dt>Can 1350 aluminum be welded?<\/dt>\n<dd>Yes. 1350 can be welded using TIG or MIG welding processes. Recommended filler wires are 1350 (for like-alloy welding) or 4043 (for improved crack resistance in some joint designs). As a non-heat-treatable alloy, welding does not cause heat-affected zone strength loss.<\/dd>\n<\/dl>\n<h2>\u5e38\u89c1\u8ba2\u8d2d\u95ee\u9898\u89e3\u7b54<\/h2>\n<dl>\n<dt>What is the minimum order quantity (MOQ) for 1350 aluminum?<\/dt>\n<dd>Linsy supports low-MOQ custom production for non-stock items. Standard in-stock sizes are available with flexible order quantities. Contact us with your requirements for a specific MOQ.<\/dd>\n<dt>What is the typical lead time for custom 1350 aluminum orders?<\/dt>\n<dd>Typical custom lead time is 10\u201360 days, depending on alloy, dimensions, processing requirements, and order complexity. In-stock standard sizes can be delivered faster.<\/dd>\n<dt>\u5728\u4e0b\u5168\u8ba2\u5355\u524d\u53ef\u4ee5\u7533\u8bf7\u6837\u54c1\u5417\uff1f<\/dt>\n<dd>Yes. Sample pieces or small trial orders are available. Please contact our sales team to discuss your sampling requirements.<\/dd>\n<dt>\u6797\u897f\u63a5\u53d7\u54ea\u4e9b\u4ed8\u6b3e\u65b9\u5f0f\uff1f<\/dt>\n<dd>Linsy accepts T\/T, L\/C, and other standard international payment methods. Specific terms can be confirmed during quotation.<\/dd>\n<dt>Does Linsy ship internationally?<\/dt>\n<dd>Yes. Linsy supplies aluminum products to customers in Europe, South Asia, the Middle East, and other global markets. Shipping terms and incoterms can be specified during ordering.<\/dd>\n<\/dl>","protected":false},"excerpt":{"rendered":"<p>1350 aluminum alloy (UNS A91350) is a commercially pure aluminum grade with a minimum aluminum content of 99.5%. As a non-heat-treatable alloy supplied in strain-hardened tempers (O, H12, H14, H16, H18), 1350 offers excellent electrical conductivity (~62% IACS), good corrosion resistance, and high formability. Linsy supplies 1350 aluminum sheet, coil, plate, bar, tube, wire, and profiles in tempers O, H12, H14, H16, and H18, with custom sizes, surface finishing options, and MTC reports available for every order.<\/p>\n<p>\n<strong>\u53ef\u9009\u683c\u5f0f\uff1a<\/strong> \u677f\u6750 \/ \u677f \/ \u5377\u6750 \/ \u68d2\u6750 \/ \u7ba1\u6750 \/ \u7ebf\u6750 \/ \u578b\u6750<br \/>\n<strong>\u5e38\u89c1\u813e\u6c14\uff1a<\/strong> O \/ H12 \/ H14 \/ H16 \/ H18<br \/>\n<strong>\u5904\u7406\u652f\u6301\uff1a<\/strong> \u6570\u63a7\u52a0\u5de5 \/ \u6fc0\u5149\u5207\u5272 \/ TIG \u548c MIG \u710a\u63a5 \/ \u9633\u6781\u6c27\u5316 \/ \u629b\u5149<br \/>\n<strong>\u8d28\u91cf\u6587\u4ef6\uff1a<\/strong> \u6bcf\u7b14\u8ba2\u5355\u5747\u9644\u5e26MTC\u62a5\u544a\uff0c\u53ef\u6839\u636e\u8981\u6c42\u63d0\u4f9bSGS\u68c0\u6d4b\u62a5\u544a<\/p>","protected":false},"featured_media":4701,"template":"","meta":{"_seopress_titles_title":"1350 Aluminum Alloy \u2014 Pure Aluminum Sheet, Wire & Busbar Supplier | Linsy Aluminum","_seopress_titles_desc":"Source 1350 aluminum alloy (Al99.5, UNS A91350) for electrical and busbar applications. ISO 9001 certified. Sheet, coil, wire, bar, tube. MTC with every order. Custom sizes, 10-60 days lead time.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":""},"product_brand":[],"product_cat":[84],"product_tag":[],"class_list":["post-2920","product","type-product","status-publish","has-post-thumbnail","product_cat-1000-series-aluminum-alloys","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/premiumalu.com\/zh\/wp-json\/wp\/v2\/product\/2920","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/premiumalu.com\/zh\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/premiumalu.com\/zh\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/premiumalu.com\/zh\/wp-json\/wp\/v2\/media\/4701"}],"wp:attachment":[{"href":"https:\/\/premiumalu.com\/zh\/wp-json\/wp\/v2\/media?parent=2920"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/premiumalu.com\/zh\/wp-json\/wp\/v2\/product_brand?post=2920"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/premiumalu.com\/zh\/wp-json\/wp\/v2\/product_cat?post=2920"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/premiumalu.com\/zh\/wp-json\/wp\/v2\/product_tag?post=2920"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}