6023铝合金

What Is 6023 Aluminum Alloy?

6023 aluminum is a lead-free free-machining Al–Mg–Si alloy that uses tin (and related elements) instead of lead to improve chip control. It is aimed at high-volume precision machining of automotive and electronic components where environmental compliance matters.

Available 6023 Aluminum Alloy Products

Bar & Rod

项目	Range
直径（圆形）	6–400 mm
Hex / square	6–200 mm
长度	1000–6000 mm
常见状态	T6, T651, T9

Sheet & Plate

项目	Range
厚度	0.5–120 mm
宽度	1000–2600 mm
长度	1000–6000 mm

管材

项目	Range
外径	10–300 mm
Wall	0.5–30 mm
长度	1000–6000 mm

Profile / Extrusion

Custom profiles supplied against customer drawings; inquire with section geometry and alloy/temper.

规格与等效牌号

体系	名称
AA / UNS	6023 (UNS A96023)
EN AW	EN AW-6023
Family	Al–Mg–Si (6xxx), heat-treatable

化学成分

要素	Weight % (max unless range)
Si	0.70–1.10
铁	最大 0.50
铜	0.20–0.50
锰	0.20–0.50
镁	0.60–1.00
Cr	最大 0.10
锌	0.20（最大值）
Ti	0.15 最大值
Sn	0.05–0.25
Al	平衡

不同回火状态下的力学性能

Values below are typical minimums for common tempers and should be confirmed against the applicable standard before specification.

脾气	Tensile Strength (MPa, min)	屈服强度（MPa，最小值）	Elongation (% min)
O	180	90	20
T6	300	260	10
T651	300	260	10

硬度选择指南

6023 is typically supplied in O, T6, and T651. T6 / T651 are the machining tempers, giving the strength and stability needed for precision turned and milled parts. O is used where forming precedes machining.

主要特点

Lead-Free Machinability

Tin-based composition delivers chip control comparable to leaded alloys while meeting RoHS/REACH.

Optimized Chip Control

Produces short, manageable chips that reduce bird-nesting on automatic lathes.

高强度

T6/T651 tempers support demanding precision components.

良好的耐腐蚀性

Better atmospheric resistance than 2xxx series alternatives.

Excellent Anodizing

Responds well to decorative and hard-coat anodizing for a uniform appearance.

应用

• 汽车 brake components, fuel-injection parts, hydraulic valves
• 电子设备 connector bodies, sensor housings, precision pins
• Pneumatics & hydraulics: manifolds, pistons, fittings
• 紧固件： high-precision nuts, bolts, threaded inserts

加工与表面处理说明

6023 is supplied in heat-treatable tempers and supports standard aluminum fabrication:

• 裁剪： shearing, sawing, and laser cutting to size
• 机加工： CNC turning and milling; free-machining variants suit high-volume automatic lathes
• 焊接： TIG/MIG weldable; note that welding reduces heat-treated strength in the weld zone
• 成型： O and T4 tempers form well; T6/T9 are used near-finished
• 表面处理： anodizing (decorative and hard-coat) and polishing for visible parts

质量文件与检验

Every order ships with a Mill Test Certificate (MTC) that reports the actual chemistry and mechanical results for the supplied lot. Inspection is available against ASTM, EN, or GB standards on request. Typical documents include:

• MTC (EN 10204 3.1): per-heat chemical and mechanical verification
• Dimension report: thickness, width, OD, and length tolerances per ordered specification
• Surface & packaging inspection: finish, edge, and export packaging photos on request

Linsy holds ISO 9001 (quality), ISO 14001 (environment), and ISO 45001 (occupational health and safety) certifications. Third-party SGS or comparable test reports can be arranged when the project requires them.

Why Choose Linsy for 6023 Aluminum Alloy

Linsy Aluminum is a Shenzhen-based manufacturer with more than 20 years of experience supplying 1xxx–8xxx series aluminum to automotive, electronics, general engineering, and construction customers. We support both prototype and production volumes with CNC machining, laser cutting, welding, anodizing, and polishing under one roof.

• Material traceability: MTC with every order, heat and lot documented
• 处理支持： cutting, machining, surface finishing, and assembly-ready parts
• Standards coverage: supply to ASTM, EN, JIS, and GB specifications
• Responsive quoting: engineering review on temper, tolerance, and formability before production

相关资源

The following resources support specification and procurement decisions for this alloy:

• Related alloy and application guides are added as Linsy publishes them.

6023 Aluminum FAQ

Is 6023 lead-free?

Yes. 6023 is a lead-free free-machining alloy that meets RoHS and REACH requirements, using tin instead of lead for chip control.

6023 vs 6262 / 2011?

6023 is the lead-free counterpart aimed at the same free-machining role as 6262 and 2011, offering comparable chip control with better environmental compliance.

Is 6023 heat-treatable?

Yes. It is supplied in O, T6, and T651 tempers, with T6/T651 used for machined parts.

常见订购问题解答

What information should I provide for a quote?

Alloy and temper, required form (sheet, plate, tube, bar, profile), dimensions and tolerances, quantity, and the applicable standard (ASTM, EN, GB, or JIS). Drawing-based profiles need a CAD file or dimension sketch.

What are the typical lead times?

Standard stock sizes are usually shipped within 10–60 days depending on specification and volume. Custom tempers, widths, or machined parts are quoted case by case.

Do you provide Mill Test Certificates?

Yes. An MTC reporting chemistry and mechanical properties for the supplied lot is provided with every order.

Can Linsy handle processing and finishing?

Yes. We offer CNC machining, laser cutting, welding, anodizing, and polishing so parts can be delivered closer to finished form.

Which standards do you supply to?

Commonly ASTM B209/B221/B210, EN 485/573/755, JIS H4000, and GB/T 3190/3880, among others. Confirm the exact standard when requesting a quote.