7014 aluminum is a high-strength, heat-treatable 7xxx series alloy built around zinc and magnesium, with small manganese and zirconium additions for grain control. It delivers a strong combination of tensile strength, toughness, and corrosion resistance, which is why it is widely specified for aerospace structural parts. 7014 responds well to heat treatment and can be supplied in sheet, plate, tube, bar, and wire. When welding is required, qualified procedures should be confirmed with our technical team. Linsy supplies 7014 in a range of tempers with mill test certificates provided on every order.
可选格式： 板材/片材、管材、棒材/圆棒、线材
常见脾气： T4、T6、T651
处理支持： CNC 加工、激光切割、TIG/MIG 焊接、阳极氧化、抛光、粉末喷涂
质量文件： 每笔订单均附有MTC报告
7014 aluminum is a high-strength, heat-treatable 7xxx series alloy built around zinc and magnesium, with small manganese and zirconium additions for grain control. It delivers a strong combination of tensile strength, toughness, and corrosion resistance, which is why it is widely specified for aerospace structural parts. 7014 responds well to heat treatment and can be supplied in sheet, plate, tube, bar, and wire. When welding is required, qualified procedures should be confirmed with our technical team. Linsy supplies 7014 in a range of tempers with mill test certificates provided on every order.
可提供的状态： T4、T6、T651
| 脾气 | 厚度（毫米） | 宽度（毫米） | 长度（毫米） |
|---|---|---|---|
| T4、T6、T651 | 0.5 – 150 | 500 – 2600 | 500 – 16000（可按需定尺切割） |
可提供的状态： T4、T6、T651
| 脾气 | 外径（毫米） | 壁厚（毫米） | 长度（毫米） |
|---|---|---|---|
| T4、T6、T651 | 6 – 300 | 0.5 – 40 | 500 – 12000 |
可提供的状态： T4、T6、T651
| 脾气 | 直径（毫米） | 长度（毫米） |
|---|---|---|
| T4、T6、T651 | 3 – 300 | 500 – 12000 |
可提供的状态： T6
| 直径（毫米） | 卷材重量 | 宽容 |
|---|---|---|
| 0.8 – 30 | 至少 50 公斤 | ± 0.02 毫米 |
7014 aluminum (EN AW-7014, AlZn5.7Mg2.7Mn) is supplied to common wrought-alloy specifications. Typical standards by form: ASTM B209 (sheet and plate), ASTM B221 (extruded tube, bar, and profiles), ASTM B211 (bar and rod), and ASTM B313 (welded tube). Forging stock follows ASTM B247. Always confirm the exact specification and temper with our team for your order.
| 要素 | 百分比 (%) |
|---|---|
| Si | 最大 0.50 |
| 铁 | 最大 0.50 |
| 铜 | 最大 0.10 |
| 锰 | 最大 0.10 |
| 镁 | 2.2 – 3.3 |
| Cr | 0.05 – 0.30 |
| 锌 | 5.2 – 6.2 |
| Ti | 0.15 最大值 |
| Zr | 最大 0.10 |
| 其他（每项） | 0.05 |
| 其他（共计） | 0.15 |
| Al | 平衡 |
| 脾气 | 拉伸强度（兆帕） | 屈服强度（兆帕） | 伸长率 (%) | 剪切强度（兆帕） |
|---|---|---|---|---|
| T6 | 480 – 520 | 360 – 420 | 11 – 20 | 280 – 380 |
| T651 | 480 – 520 | 360 – 420 | 11 – 20 | 280 – 380 |
数值为指定条件下的典型值。长破折号（—）表示该值在源数据中不可用；请与工厂测试证书确认。带星号的值是待验证的估算值——请参阅审核报告。.
T6 temper reaches 480–520 MPa ultimate tensile strength while staying light.
Better fracture toughness than many higher-zinc 7xxx grades, suited to airframe loads.
Satisfactory in internal structures; exterior use should be clad or anodized.
Responds strongly to precipitation hardening for tailored strength.
Weldable with care;confirm a qualified procedure and post-weld heat treatment with our team.
Linsy machines 7014 on CNC centers and cuts it with fiber laser. For corrosion protection, anodizing or painting is recommended on exposed surfaces. Welding should use a qualified procedure with filler selected for the service environment; post-weld heat treatment can be discussed with our engineers.
Linsy 是一家总部位于深圳的铝材供应商，拥有超过 20 年的经验。我们的质量体系已通过 ISO 9001、ISO 14001 和 ISO 45001 认证。每笔订单均附带工厂测试证书 (MTC)。可根据要求提供 SGS 第三方测试报告。典型的定制交货期为 10-60 天，具体取决于状态、尺寸和数量。.
如需更深入地了解 7xxx 系列的选择和制造，请参阅我们关于铝合金选择和 7000 系合金焊接的指南。（内部链接将连接到已发布的 Linsy 博客文章。）
Common tempers are T4, T6, and T651. T651 is stress-relieved for reduced distortion during machining. Tell us your application and we will recommend a temper.
It can be welded with a qualified procedure, but strength in the heat-affected zone drops. We recommend confirming the welding process and any post-weld treatment with our technical team before production.
7014 offers slightly lower peak strength than 7075 but generally better toughness, making it a good choice for airframe structures where damage tolerance matters.
Every order ships with a mill test certificate (MTC). SGS third-party test reports are available on request.
定制铝材订单通常在 10-60 天内发货，具体取决于合金、状态、尺寸和数量。库存或标准尺寸可能更快——请咨询我们的团队。.
可以。每笔订单均包含 MTC。可根据要求提供 SGS 第三方测试报告。.
是的。我们提供 CNC 加工、激光切割、焊接、阳极氧化、抛光和粉末喷涂服务，以便零件可以以更接近成品的形式交付。.
请发送您的合金、状态、尺寸、数量和所需标准。我们的团队将确认供货情况、交货期和价格。.
林西优势
林西铝业是铝加工产品的领先供应商，服务于航空航天、通用工程、汽车、船舶和其他专业工业应用等多个行业。
我们致力于保持最高标准的质量和环境责任，我们的认证证明了这一点：ISO 9001:2008、ISO 14001:2004 和 SGS 认证。
