7075 aluminum is the best-known high-strength 7xxx series alloy, with zinc as the principal hardener and copper and magnesium as major additions. In the T6 and T651 tempers it reaches strength comparable to many steels while staying light, which is why it has been the aerospace and performance-engineering standard for decades. Its corrosion resistance is lower than 6xxx grades, so exterior use usually calls for cladding or coating. Linsy supplies 7075 across the full form range — sheet, plate, tube, bar, wire, and profile — with mill test certificates on every order.
可选格式： 板材/片材、管材、棒材/圆棒、线材
常见脾气： F, H112, O, T6, T651, T7451
处理支持： CNC 加工、激光切割、TIG/MIG 焊接、阳极氧化、抛光、粉末喷涂
质量文件： 每笔订单均附有MTC报告
7075 aluminum is the best-known high-strength 7xxx series alloy, with zinc as the principal hardener and copper and magnesium as major additions. In the T6 and T651 tempers it reaches strength comparable to many steels while staying light, which is why it has been the aerospace and performance-engineering standard for decades. Its corrosion resistance is lower than 6xxx grades, so exterior use usually calls for cladding or coating. Linsy supplies 7075 across the full form range — sheet, plate, tube, bar, wire, and profile — with mill test certificates on every order.
可提供的状态： F、O、T6、T651、T7451、H112
| 脾气 | 厚度（毫米） | 宽度（毫米） | 长度（毫米） |
|---|---|---|---|
| F、O、T6、T651、T7451、H112 | 0.5 – 200 | 500 – 2600 | 500 – 16000（可按需定尺切割） |
可提供的状态： F、O、T6、T651、T7451、H112
| 脾气 | 外径（毫米） | 壁厚（毫米） | 长度（毫米） |
|---|---|---|---|
| F、O、T6、T651、T7451、H112 | 6 – 300 | 0.5 – 40 | 500 – 12000 |
可提供的状态： F、O、T6、T651、T7451、H112
| 脾气 | 直径（毫米） | 长度（毫米） |
|---|---|---|
| F、O、T6、T651、T7451、H112 | 3 – 300 | 500 – 12000 |
可提供的状态： T6, T651
| 直径（毫米） | 卷材重量 | 宽容 |
|---|---|---|
| 0.8 – 30 | 至少 50 公斤 | ± 0.02 毫米 |
7075 aluminum (EN AW-7075, AlZn5.5MgCu) is supplied to common wrought-alloy specifications. Typical standards by form: ASTM B209 (sheet and plate), ASTM B221 (extruded tube, bar, and profiles), ASTM B211 (bar and rod), ASTM B247 (forging stock), and ASTM B313 (welded tube). Always confirm the exact specification and temper with our team for your order.
| 要素 | 百分比 (%) |
|---|---|
| Si | 0.40（上限） |
| 铁 | 最大 0.50 |
| 铜 | 1.2 - 2.0 |
| 锰 | 0.30（上限） |
| 镁 | 2.1 - 2.9 |
| Cr | 0.18 - 0.28 |
| 锌 | 5.1 - 6.1 |
| Ti | 0.20（最大值） |
| Zr | 最大 0.25 |
| 其他（每项） | 0.05 |
| 其他（共计） | 0.15 |
| Al | 平衡 |
| 脾气 | 拉伸强度（兆帕） | 屈服强度（兆帕） | 伸长率 (%) | 剪切强度（兆帕） |
|---|---|---|---|---|
| O | 230 – 290 | 95 – 145 | 10 – 13 | 150 |
| T6 | 540 – 570 | 480 – 505 | 8 – 11 | 330 |
| T651 | 540 – 570 | 480 – 505 | 8 – 11 | 330 |
| T73 / T7451 | 470 – 500 | 390 – 420 | 8 – 11 | 285 |
Values are typical AA 7075 figures by temper; the soft O condition and peak T6 / overaged T73 differ widely. Confirm exact numbers with the mill certificate.
Decades of use as the reference strong aluminum alloy.
Steel-like strength at a fraction of the mass.
Clad sheet or coatings recommended for exterior service.
Generally supplied machined or bonded, not welded.
Linsy machines 7075 on CNC centers and laser-cuts plate and sheet. Anodizing or painting improves corrosion resistance; clad sheet is available for exterior use. Welding is not recommended — for joints, consider 6061 or a welding-grade 7xxx with our team.
Linsy 是一家总部位于深圳的铝材供应商，拥有超过 20 年的经验。我们的质量体系已通过 ISO 9001、ISO 14001 和 ISO 45001 认证。每笔订单均附带工厂测试证书 (MTC)。可根据要求提供 SGS 第三方测试报告。典型的定制交货期为 10-60 天，具体取决于状态、尺寸和数量。.
Explore these in-depth guides from our technical library:
Applications where maximum strength-to-weight matters: aircraft structures, performance automotive, bike frames, and tooling.
T651 is stress-relieved and the usual choice for plate and bar where machining stability matters; T6 is the peak-aged baseline.
Less so than 6xxx alloys. Use T73/T7451 tempers or cladding/coating for corrosive environments.
It welds poorly and loses strength in the heat-affected zone. For welded builds, ask us about 6061 or a qualified welding-grade alternative.
每笔订单均附带 MTC，可根据要求提供 SGS 第三方测试报告。.
定制铝材订单通常在 10-60 天内发货，具体取决于合金、状态、尺寸和数量。库存或标准尺寸可能更快——请咨询我们的团队。.
可以。每笔订单均包含 MTC。可根据要求提供 SGS 第三方测试报告。.
是的。我们提供 CNC 加工、激光切割、焊接、阳极氧化、抛光和粉末喷涂服务，以便零件可以以更接近成品的形式交付。.
请发送您的合金、状态、尺寸、数量和所需标准。我们的团队将确认供货情况、交货期和价格。.
林西优势
林西铝业是铝加工产品的领先供应商，服务于航空航天、通用工程、汽车、船舶和其他专业工业应用等多个行业。
我们致力于保持最高标准的质量和环境责任，我们的认证证明了这一点：ISO 9001:2008、ISO 14001:2004 和 SGS 认证。
