6082-O/T4/T6/T651 铝线

What Is 6082 Aluminum Wire?

6082 aluminum wire (EN AW-6082, AlSi1MgMn) is a heat-treatable 6000-series wire valued for its strength, corrosion resistance, and good fatigue performance. With added manganese, it holds structural integrity better than 6061 in demanding applications, and is commonly drawn in O, T4, T6, and T651 tempers.

It serves as welding wire, rivets, fasteners, and feedstock for stressed structural components where a light, strong, and weldable material is required.

Available 6082 Aluminum Wire

形式	常见状态	典型尺寸范围
Wire (drawn)	O, T4, T6, T651	Diameter 0.8–30 mm
Spool / Coil	O, T4, T6, T651	Min 50 kg per coil; tolerance per spec

Wire is supplied on spools or coils with a minimum of 50 kg per coil. Diameter tolerance follows the agreed specification (for example ASTM B211 or EN 755-2). Custom diameters and tempers can be discussed at order.

6082 Wire Specifications & Equivalent Designations

名称	价值
EN AW	EN AW-6082
UNS	A96082
常用标准	ASTM B211、ASTM B221、AWS A5.10、EN 755-2、GB/T 3191
情绪	O, T4, T6, T651
直径	0.8–30 毫米

Chemical Composition of 6082 Aluminum Wire

要素	成分（重量百分比）
Si	0.70 – 1.30
铁	最大 0.50
铜	最大 0.10
锰	0.40 – 1.00
镁	0.60 – 1.20
Cr	最大 0.25
锌	0.20（最大值）
Ti	0.15 最大值
其他（每项）	0.05 最大值
其他（共计）	0.15 最大值
Al	剩余

不同回火状态下的力学性能

Typical reference values for 6082 wire; confirm against the ordered standard and Linsy’s mill data.

脾气	拉伸强度（兆帕）	屈服强度（兆帕）	伸长率（%，分钟）
O	120	65	22
T4	205	110	16
T6	310	270	10
T651	310	270	10

硬度选择指南

• O： soft, maximum formability for severe forming or further processing.
• T4： naturally aged; balanced formability and strength.
• T6 / T651: peak aged (T651 stress-relieved); highest strength for structural fasteners and welding wire.

Key Characteristics of 6082 Aluminum Wire

Strength & Fatigue

Higher manganese gives 6082 strong performance in cyclic-load applications versus 6061.

耐腐蚀性

Good in atmospheric and many industrial environments.

焊接性

Suitable as welding wire with compatible filler; produces sound joints for structural assemblies.

常见应用

• Welding wire and consumables
• Rivets and fasteners
• Trusses, bridges, and highly stressed structures
• Transportation equipment
• Machined parts

加工与表面处理说明

机械加工

6082 machines well in the soft (O) and solution-heat-treated tempers; T6/T651 tempers are stronger and can work-harden at the cutting edge, so sharp tooling and appropriate feeds are recommended.

焊接

6082 is generally weldable using TIG or MIG processes with matching or 4043/5356 filler, depending on the service requirement. Welded zones lose some strength compared with the base temper — design accordingly for structural use.

成形与热处理

成形最好在O或T4状态下进行。最终强度由指定状态决定；未经确认合金响应情况，请勿重新进行热处理。.

表面处理

常见表面处理包括阳极氧化、抛光和粉末喷涂。阳极氧化质量取决于表面预处理，请在生产前确认表面处理要求。.

质量文件与检验

Every 6082 wire order ships with an MTC reporting chemical composition and mechanical properties. Third-party SGS reports can be arranged on request. Confirm the required standard (ASTM, EN, GB) when ordering.

Why Choose Linsy for 6082 Aluminum

Linsy在深圳设有生产基地，拥有超过20年为全球B2B客户供应铝半成品的经验。我们涵盖1000至8000系列合金，支持标准库存尺寸和按需定制尺寸。.

• 材料范围： 1000–8000 series, including 6082 in the tempers listed above.
• 处理支持： 按图纸提供CNC加工、激光切割、TIG/MIG焊接和去毛刺服务。.
• 表面处理： 可根据要求提供阳极氧化、抛光、粉末喷涂和拉丝表面处理。.
• 质量体系： 运营遵循ISO 9001、ISO 14001及ISO 45001标准。.
• 文件资料： 每份订单均附带MTC（工厂质保书）；如需第三方SGS检测报告，可另行安排。.

相关资源

• 6082-T6 铝材完全指南

6082 Aluminum Wire FAQ

What tempers are available for 6082 wire?

O, T4, T6, and T651, with T6/T651 preferred for high-strength fasteners and welding wire.

What diameter range do you supply?

Typically 0.8–30 mm, with custom sizes available on request.

Is 6082 wire good for welding?

Yes. It welds well by TIG/MIG and is used as welding wire for structural aluminum assemblies.

常见订购问题解答

通常的交货周期是多久？

标准库存产品通常在10至30天内发货。定制尺寸、供货状态或表面处理通常需要30至60天，具体视规格及订单数量而定。.

你们提供工厂测试证书吗？

可以。每份订单均随附MTC，按订购标准报告化学成分及机械性能。.

能否供应定制尺寸和回火状态？

可以。我们供应板材、带材、棒材、管材及型材的标准及按需定制尺寸，并可根据要求安排特定供货状态。.

贵公司遵循哪些质量标准？

运营遵循ISO 9001、ISO 14001及ISO 45001标准。材料可按ASTM、EN、GB或JIS规范供应，视要求而定。.

产品如何包装以供出口？

采用标准适航出口包装并具备防潮措施；具体要求在订单时确认。.