6951 aluminum is a heat-treatable 6000-series alloy developed as a brazing-sheet core material for radiators and heat exchangers. Its balanced silicon and magnesium content gives good strength after brazing while resisting core erosion during vacuum or controlled-atmosphere brazing. Linsy supplies 6951 as sheet, coil, tube, bar, and wire in O, T4, and T6 tempers.
可选格式： sheet / coil, tube, bar / rod, wire
常见脾气： T6, T4, O
处理支持： CNC 加工、激光切割、TIG/MIG 焊接、阳极氧化、抛光、粉末喷涂
质量文件： 每笔订单均附有MTC报告
6951 is commonly used as the core layer of clad brazing sheet, paired with a cladding alloy such as 4343 or 4045 on one or both faces. During the brazing cycle the cladding melts and flows to seal joints, while the 6951 core keeps the assembly strong and formable. It is widely specified in automotive and HVAC heat exchangers.
| 参数 | Range |
|---|---|
| 厚度 | 0.3 – 150 mm |
| 宽度 | 500 – 2600 mm |
| 长度 | 500 – 16000 mm |
| 情绪 | O, T4, T6, T651 |
| 参数 | Range |
|---|---|
| 外径 | 6 – 300 mm |
| 壁厚 | 0.5 – 40 mm |
| 长度 | up to 12000 mm |
| 情绪 | O, T4, T6 |
| 参数 | Range |
|---|---|
| 直径 | 3 – 300 mm |
| 长度 | up to 12000 mm |
| 情绪 | O, T4, T6 |
| 参数 | Range |
|---|---|
| 直径 | 0.8 – 30 mm |
| 卷材重量 | min 50 kg |
| 情绪 | O、T6 |
| 名称 | Reference |
|---|---|
| AA / UNS | A96951 |
| EN AW | EN AW-6951 |
| Common standards | ASTM B209, ASTM B210, EN 573, GB/T 3190 |
| 系列 | 6000 (Al-Mg-Si brazing core) |
| 要素 | Content (wt%) |
|---|---|
| 硅 (Si) | 0.20 – 0.50 |
| 铁（Fe） | 0.80（最大值） |
| 铜 (Cu) | 0.15 – 0.40 |
| 锰 (Mn) | 最大 0.10 |
| 镁（Mg） | 0.40 – 0.80 |
| 铬 (Cr) | 0.05 – 0.20 |
| 锌 (Zn) | 0.20（最大值） |
| 钛 (Ti) | 0.15 最大值 |
| 其他，各 | 0.05 最大值 |
| 其他，合计 | 0.15 最大值 |
| 铝 (Al) | 平衡 |
| 脾气 | Tensile (MPa) | Yield (MPa) | 伸长率 (%) |
|---|---|---|---|
| T6 | 270 – 310 | 230 – 270 | 8 – 12 |
| T4 | 200 – 240 | 120 – 160 | 14 – 18 |
| O | ≤ 160 | ≤ 70 | ≥ 18 |
Soft core for maximum formability before brazing; often the as-clad supplied condition.
Solution heat treated and naturally aged; good forming plus moderate strength.
Peak strength after artificial aging; used where the core must carry load after brazing.
Engineered to survive vacuum and controlled-atmosphere brazing with low core erosion.
Good heat transfer for compact cooling systems.
Resists atmospheric and chemical attack for long service life.
Forms into fins, manifolds, and intricate heat-exchanger shapes.
6951 is normally supplied as clad brazing sheet (core plus 4343/4045 cladding) for furnace brazing. It forms well and can be welded where cladding is absent, but the brazing cladding must be protected from contamination. Anodizing is possible but less common than for decorative 6xxx alloys.
Every order ships with a Mill Test Certificate (MTC) recording composition and mechanical results. Our quality system is certified to ISO 9001, ISO 14001, and ISO 45001. Third-party SGS test reports can be arranged on request. Inspection covers dimensions, surface condition, and mechanical verification by temper.
Linsy Aluminum is a Shenzhen-based aluminum manufacturer with more than 20 years of experience supplying the 1000 to 8000 series in plate, bar, tube, wire, coil, profile, and block forms. For 6951 aluminum, we support both off-the-shelf ranges and made-to-order dimensions.
See the blog articles linked below for deeper background, and contact our team for a tailored quote on 6951 aluminum.
Almost always as the core of clad brazing sheet, with a lower-melting cladding alloy such as 4343 or 4045 on one or both faces. Specify cladding when requesting a quote.
3003 is a non-heat-treatable brazing core with lower strength; 6951 is heat-treatable and stronger after brazing, suiting higher-pressure exchangers.
O or T4 are common as-supplied conditions because they form easily before the braze cycle; T6 cores are used where post-braze strength matters.
Custom sizes and tempers usually ship within 10 to 60 days. Confirm the exact window when you request a quote, as it depends on alloy, temper, dimensions, and order quantity.
MOQ is flexible and reviewed case by case. Small lots and prototypes can often be accommodated; larger or standard runs are more economical. Share your required dimensions and quantity for a firm quote.
Every order ships with a Mill Test Certificate (MTC). ISO 9001, ISO 14001, and ISO 45001 certifications apply to our management system. SGS third-party test reports can be arranged on request.
Yes. We provide CNC machining, laser cutting, TIG/MIG welding, and surface treatments including anodizing, polishing, powder coating, and PVC film protection.
Send your alloy/temper, required form, dimensions, quantity, and any processing or certificate requirements. Our team returns a quote with lead time and shipping terms.
林西优势
林西铝业是铝加工产品的领先供应商，服务于航空航天、通用工程、汽车、船舶和其他专业工业应用等多个行业。
我们致力于保持最高标准的质量和环境责任，我们的认证证明了这一点：ISO 9001:2008、ISO 14001:2004 和 SGS 认证。
