6060 铝合金

6060 aluminum is a heat-treatable Al-Mg-Si alloy widely used for architectural extrusions where a clean surface after anodizing matters. It offers moderate strength, good corrosion resistance, and easy fabrication.

可选格式: sheet / plate / extruded profile / bar / tube
常见脾气: O / T4 / T5 / T6
处理支持: CNC machining / cutting / anodizing / powder coating
质量文件: 每笔订单均附有MTC报告

What Is 6060 Aluminum?

6060 is a lower-strength member of the 6xxx (Al-Mg-Si) family, closely related to 6063 but with slightly tighter impurity control. Its main advantage is excellent extrudability and a smooth, bright finish after anodizing, which makes it the default choice for decorative and structural architectural profiles.

Like other heat-treatable alloys, its strength comes from the magnesium-silicide precipitate formed during the T5/T6 aging treatment. In the O temper it is soft and easy to bend; in T5/T6 it reaches moderate structural strength.

Available 6060 Aluminum Products

Extruded Profile & Tube

Custom cross-sections per drawing; typical section size 5–400 mm, tube outer diameter 6–300 mm, wall 0.5–20 mm, length up to 6000 mm (or coil for small sections).

板材与厚板

Thickness 0.5–150 mm, width 500–2600 mm, length 500–12000 mm. Sheet is typically 0.5–6 mm; plate 6–150 mm.

酒吧

Round bar diameter 6–400 mm, length up to 6000 mm; cut to size on request.

规格与等效牌号

牌号体系 等效牌号
AA 6060 EN AW-6060
UNS A96060 ISO Al-MgSi0.5

常用标准: ASTM B221、EN 755、EN 12020、GB/T 6892。.

化学成分

要素 成分(重量百分比)
Si 0.30–0.60
0.10–0.30
最大 0.10
最大 0.10
0.35–0.60
Cr 0.05 最大值
0.15 最大值
Ti 最大 0.10
其他(每项) 0.05 最大值
其他(共计) 0.15 最大值
Al 余量(剩余部分)

不同回火状态下的力学性能

以下数值为挤压或拉制产品的典型值,应针对具体状态和截面与工厂测试证书进行确认。.

脾气 拉伸强度(兆帕) 屈服强度(兆帕) 伸长率 (%)
O 120 55 25
T4 170 90 20
T5 215 180 12
T6 245 215 12

硬度选择指南

  • O — soft, for bending and forming operations.
  • T4 — naturally aged; moderate strength with good formability.
  • T5 — cooled from extrusion and artificially aged; the most common architectural temper, good finish.
  • T6 — solution heat-treated and aged; highest strength of the common 6060 tempers.

主要特点

挤出性

6060 flows well in the extrusion press, allowing thin walls and complex shapes at good press speed.

Surface Finish After Anodizing

It produces a uniform, bright anodized layer, which is why it dominates window, door, and decorative trim.

耐腐蚀性

Good in atmospheric and mild industrial environments; suitable for indoor and most outdoor architectural use.

焊接性

Readily welded by TIG/MIG; post-weld strength in the heat-affected zone is lower than the parent T6, so design accordingly.

中等强度

Enough for architectural and light structural roles, but not for highly loaded structural members (use 6061/6082 instead).

应用

  • 窗户、门及幕墙框架
  • Railings, handrails, and balustrades
  • Furniture tubing and decorative trim
  • Lighting tracks and fixtures
  • Transport interior profiles

加工与表面处理说明

  • 挤压: primary production route; dies made to customer drawing.
  • 阳极氧化: clear or colored anodizing is the standard finish for 6060 trim.
  • 粉末喷涂: available for color-matched architectural parts.
  • 焊接: TIG/MIG with 4043 or 5356 filler; minimize heat input to protect the temper.
  • 机加工: fair machinability; use sharp tools and appropriate speeds for the T temper.

质量文件与检验

  • 材料测试证书 (MTC) 随每份订单提供,按要求可提供符合EN 10204 3.1标准的证书。.
  • 尺寸和外观检验 每批货物均进行;可根据要求提供超声波或涡流检测。.
  • 第三方检测 如需,可安排如SGS等机构进行成分和力学性能验证(SGS提供测试报告,而非公司认证)。.
  • 管理体系: ISO 9001(质量)、ISO 14001(环境)、ISO 45001(职业健康与安全)—— 无年份后缀。.

Why Choose Linsy for 6060 Aluminum

  • 二十年的挤压和加工经验 来自我们的深圳工厂,服务于1000–8000系列合金。.
  • 完整的加工链 — CNC加工、TIG/MIG焊接、激光切割、阳极氧化、抛光和粉末涂层均在内部或与合格合作伙伴共同完成。.
  • 值得信赖的文件: 每份订单均附MTC,并可应要求提供SGS测试报告。.
  • 按尺寸切割和定制尺寸 支持大多数形态,交货期通常为10–60天,具体取决于状态和数量。.

相关资源

以下指南涵盖该合金的选择、状态比较和加工说明。发布前请确认实时链接的有效性——如有可用资源,请将任何外部引用替换为Linsy自有博客链接。.

  • 6060 铝合金:综合指南

6060铝材常见问题解答

Is 6060 heat-treatable?

Yes. 6060 is a heat-treatable 6xxx alloy; its strength develops through T5/T6 aging.

6060 vs 6063 — which should I choose?

They are very similar. 6063 is slightly more common for premium architectural anodizing; 6060 offers comparable finish with marginally different impurity limits. Either works for most trim.

Can 6060 be anodized?

Yes, and it anodizes to a bright, even finish — this is its primary selling point.

What tempers are typically stocked?

O, T4, T5, and T6. T5 and T6 dominate architectural extrusion.

常见订购问题解答

最小起订量是多少?

最小起订量取决于产品形态与状态。标准截面及状态产品起订量可为数百公斤;定制尺寸或特殊状态订单需逐案评估。.

通常的交货周期是多久?

库存状态产品的交货期通常为10–30天。定制挤压或热处理条件产品最长可能需要60天。请于询盘时与销售团队确认。.

能否提供定尺切割及加工服务?

可以。我们提供切割、CNC加工、焊接、阳极氧化及抛光服务。询盘时请提供图纸或尺寸清单。.

随货附带哪些文件?

每批订单均附带材料测试证书。可根据要求安排SGS或其他第三方检测报告。.

生产设备

认证

仓库和库存

订购流程

林西优势

林西铝业是铝加工产品的领先供应商,服务于航空航天、通用工程、汽车、船舶和其他专业工业应用等多个行业。

我们致力于保持最高标准的质量和环境责任,我们的认证证明了这一点:ISO 9001:2008、ISO 14001:2004 和 SGS 认证。

立即注册表格! 林西铝业为您提供优质铝解决方案。

WhatsApp 电话