Liga de alumínio 5182

What Is 5182 Aluminum Alloy Aluminum?

5182 Aluminum Alloy (AlMg4.5Mn0.4) is a non-heat-treatable aluminum-magnesium (5xxx) alloy. Its strength comes from magnesium in solid solution and strain hardening, not heat treatment. It offers good corrosion resistance—especially in marine and industrial environments—and welds well, which makes it a common choice for structures exposed to water, chemicals, or cycling loads.

Available 5182 Aluminum Alloy Aluminum Products

5182 Aluminum Alloy is supplied in several forms and tempers. Standard size ranges are below; other dimensions can be discussed with our team.

Sheet & Plate

Item	Faixa
Espessura	0.5 – 150 mm
Largura	1000 – 3000 mm
Comprimento	1000 – 6000 mm
Common tempers	O, H111, H32, H34

Bar (Round / Flat / Square)

Item	Faixa
Diameter / side	6 – 400 mm
Comprimento	1000 – 6000 mm
Common tempers	O, H111, H32, H34

Tube & Pipe

Item	Faixa
Outer diameter	6 – 400 mm
Wall thickness	0.5 – 40 mm
Comprimento	1000 – 6000 mm
Common tempers	O, H111, H32, H34

Wire & Coil

Item	Faixa
Diâmetro	0.8 – 12 mm
Peso da bobina	10 – 500 kg
Size tolerance	± 0,05 mm
Common tempers	O, H111, H32, H34

Especificações e Designações Equivalentes

Padrão	Designação
AA (USA)	Liga de alumínio 5182
EN AW	AlMg4.5Mn0.4
Série	5000 (Al-Mg, non-heat-treatable)

Composição química

Elemento	Peso %
Si	0,20 máx
Fe	0,35 máx.
Cu	0,15 máximo
Mn	0.20 – 0.50
Mg	4.0 – 5.0
Cr	0,10 máximo
Zn	0,25 máximo
Ti	0,10 máximo
Al	Equilíbrio

Values are typical AA composition ranges; confirm against the ordered specification and the supplied MTC.

Propriedades Mecânicas por Têmpera

Temperamento	Tração (MPa)	Limite de Escoamento (MPa)	Alongamento (%)	Brinell
O	275	125	21	65
H111	300	180	16	70
H32	315	235	12	75
H34	330	255	10	80

Mechanical values are representative room-temperature typicals for plate, sheet, or bar and should be confirmed against the ordered thickness and the supplied MTC.

Guia de Seleção de Tempero

• O (annealed): softest, best formability and corrosion resistance; for deep drawing and welding.
• H1xx / H2xx / H3xx: strain-hardened tempers with increasing strength and decreasing ductility.
• H116 / H321: stabilized tempers for marine plate with good exfoliation-corrosion resistance.

Choose the softest temper that meets the strength need to keep forming and welding straightforward.

Principais características

High magnesium content

At about 4.5% Mg, 5182 delivers good strength while staying formable in soft tempers.

Formabilidade

Commonly used for drawn and formed parts such as automotive body panels and can stock.

Resistência à corrosão

Good resistance in atmospheric and mildly corrosive environments.

Aplicativos

• Automotive body panels and structures
• Beverage can and packaging stock
• Marine and transport fabrications
• Welded containers and enclosures

**Notas sobre Processamento e Acabamento de Superfície**

5182 Aluminum Alloy is a non-heat-treatable 5xxx alloy, so strength comes from strain hardening (H-tempers), not heat treatment. It cuts, drills, and welds well with standard aluminum tooling.

• Corte: CNC machining, laser cutting, and sawing are supported.
• Soldagem: TIG and MIG welding with matching or compatible 5xxx filler.
• Conformação: good cold formability in O and soft H-tempers.
• **Acabamento de superfície:** mill finish, anodizing, polishing, powder coating, or PVC film protection.

Note: anodized color of 5xxx alloys can differ slightly from 6xxx alloys; confirm the finish on a sample if color match matters.

Documentos de Qualidade e Inspeção

Every 5086 order ships with a Mill Test Certificate (MTC) that reports the actual chemical analysis and mechanical results for the supplied material. Third-party SGS or equivalent test reports can be arranged on request for project or tender requirements.

• MTC (EN 10204 3.1 or 3.2) with every order
• Dimensional inspection against the agreed tolerance
• Surface and visual check before packing
• Material traceability by heat / lot number

Why Choose Linsy for 5182 Aluminum Alloy

Linsy Aluminum is a Shenzhen-based aluminum supplier with more than 20 years of experience serving marine, transport, and general engineering customers. We supply 1000–8000 series material in plate, bar, tube, wire, coil, profile, and block forms.

• ISO 9001, ISO 14001, and ISO 45001 certified management systems
• MTC with every order and SGS test reports available on request
• CNC machining, laser cutting, welding, and surface finishing support
• Typical custom lead time 10–60 days, with low minimum order quantities

For a quote, share your alloy, temper, dimensions, quantity, and any certificate requirements.

**Recursos Relacionados**

• Liga de alumínio 5182: Benefícios para seus projetos
• Mastering 5182 Aluminum Use
• 5083 Marine-Grade Aluminum
• Liga de alumínio 5052

5182 Aluminum Alloy Aluminum FAQ

Is 5182 heat treatable?

No. 5182 is a non-heat-treatable 5xxx alloy; strength is set by magnesium content and strain hardening.

What tempers are typical for 5182 sheet?

O, H111, H32, and H34 are common for formed and welded parts.

5182 vs 5083?

5182 is a medium-strength forming alloy (Mg ~4.5), while 5083 is a higher-strength marine plate alloy. Pick based on forming needs versus required strength.

FAQ Geral de Pedidos

Qual é o prazo de entrega típico?

Custom sizes are usually produced within 10–60 days depending on alloy, temper, and quantity. Confirm the schedule when you request a quote.

Do you provide mill test certificates?

Yes. An MTC is provided with every order, and third-party test reports can be arranged on request.

What surface finishes are available?

Mill finish, anodizing, polishing, powder coating, and PVC film are available depending on the form.

Qual é a quantidade mínima do pedido?

We support low MOQs for custom requests. Share your required size and quantity for a quote.