5182 Aluminium-Legierung

What Is 5182 Aluminum Alloy Aluminum?

5182 Aluminum Alloy (AlMg4.5Mn0.4) is a non-heat-treatable aluminum-magnesium (5xxx) alloy. Its strength comes from magnesium in solid solution and strain hardening, not heat treatment. It offers good corrosion resistance—especially in marine and industrial environments—and welds well, which makes it a common choice for structures exposed to water, chemicals, or cycling loads.

Available 5182 Aluminum Alloy Aluminum Products

5182 Aluminum Alloy is supplied in several forms and tempers. Standard size ranges are below; other dimensions can be discussed with our team.

Blech & Platte

Item	Bereich
Dicke	0.5 – 150 mm
Breite	1000 – 3000 mm
Länge	1000 – 6000 mm
Übliche Härtegrade	O, H111, H32, H34

Bar (Round / Flat / Square)

Item	Bereich
Diameter / side	6 – 400 mm
Länge	1000 – 6000 mm
Übliche Härtegrade	O, H111, H32, H34

Tube & Pipe

Item	Bereich
Außendurchmesser	6 – 400 mm
Wandstärke	0.5 – 40 mm
Länge	1000 – 6000 mm
Übliche Härtegrade	O, H111, H32, H34

Wire & Coil

Item	Bereich
Durchmesser	0.8 – 12 mm
Gewicht der Spule	10 – 500 kg
Size tolerance	± 0.05 mm
Übliche Härtegrade	O, H111, H32, H34

Technische Daten und gleichwertige Bezeichnungen

Standard	Bezeichnung
AA (USA)	5182 Aluminium-Legierung
EN AW	AlMg4,5Mn0,4
Serie	5000 (Al-Mg, non-heat-treatable)

Chemische Zusammensetzung

Element	Gewicht %
Si	0,20 max.
Fe	0,35 max
Cu	0,15 max
Mn	0.20 – 0.50
Mg	4.0 – 5.0
Cr	0,10 max
Zn	0,25 max
Ti	0,10 max
Al	Bilanz

Values are typical AA composition ranges; confirm against the ordered specification and the supplied MTC.

Mechanische Eigenschaften je nach Temperierung

Temperament	Zugfestigkeit (MPa)	Streckgrenze (MPa)	Dehnung (%)	Brinell
O	275	125	21	65
H111	300	180	16	70
H32	315	235	12	75
H34	330	255	10	80

Mechanical values are representative room-temperature typicals for plate, sheet, or bar and should be confirmed against the ordered thickness and the supplied MTC.

Leitfaden zur Auswahl der Härtung

• O (annealed): softest, best formability and corrosion resistance; for deep drawing and welding.
• H1xx / H2xx / H3xx: strain-hardened tempers with increasing strength and decreasing ductility.
• H116 / H321: stabilized tempers for marine plate with good exfoliation-corrosion resistance.

Choose the softest temper that meets the strength need to keep forming and welding straightforward.

Wesentliche Merkmale

High magnesium content

At about 4.5% Mg, 5182 delivers good strength while staying formable in soft tempers.

Verformbarkeit

Commonly used for drawn and formed parts such as automotive body panels and can stock.

Korrosionsbeständigkeit

Good resistance in atmospheric and mildly corrosive environments.

Anwendungen

• Automotive body panels and structures
• Beverage can and packaging stock
• Marine and transport fabrications
• Welded containers and enclosures

Hinweise zur Bearbeitung und Oberflächenveredelung

5182 Aluminum Alloy is a non-heat-treatable 5xxx alloy, so strength comes from strain hardening (H-tempers), not heat treatment. It cuts, drills, and welds well with standard aluminum tooling.

• Schneiden: CNC machining, laser cutting, and sawing are supported.
• Schweißen: TIG and MIG welding with matching or compatible 5xxx filler.
• Formung: good cold formability in O and soft H-tempers.
• Oberflächengüte: mill finish, anodizing, polishing, powder coating, or PVC film protection.

Note: anodized color of 5xxx alloys can differ slightly from 6xxx alloys; confirm the finish on a sample if color match matters.

Qualitätsdokumente und Qualitätsprüfung

Every 5086 order ships with a Mill Test Certificate (MTC) that reports the actual chemical analysis and mechanical results for the supplied material. Third-party SGS or equivalent test reports can be arranged on request for project or tender requirements.

• MTC (EN 10204 3.1 or 3.2) with every order
• Dimensional inspection against the agreed tolerance
• Surface and visual check before packing
• Material traceability by heat / lot number

Why Choose Linsy for 5182 Aluminum Alloy

Linsy Aluminum is a Shenzhen-based aluminum supplier with more than 20 years of experience serving marine, transport, and general engineering customers. We supply 1000–8000 series material in plate, bar, tube, wire, coil, profile, and block forms.

• ISO 9001, ISO 14001, and ISO 45001 certified management systems
• MTC with every order and SGS test reports available on request
• CNC machining, laser cutting, welding, and surface finishing support
• Typical custom lead time 10–60 days, with low minimum order quantities

For a quote, share your alloy, temper, dimensions, quantity, and any certificate requirements.

Weiterführende Ressourcen

• 5182 Aluminium-Legierung: Vorteile für Ihre Projekte
• Mastering 5182 Aluminum Use
• 5083 Marine-Grade Aluminum
• 5052-Aluminium-Legierung

5182 Aluminum Alloy Aluminum FAQ

Is 5182 heat treatable?

No. 5182 is a non-heat-treatable 5xxx alloy; strength is set by magnesium content and strain hardening.

What tempers are typical for 5182 sheet?

O, H111, H32, and H34 are common for formed and welded parts.

5182 vs 5083?

5182 is a medium-strength forming alloy (Mg ~4.5), while 5083 is a higher-strength marine plate alloy. Pick based on forming needs versus required strength.

Allgemeine Fragen zur Bestellung

Wie ist die typische Lieferzeit?

Custom sizes are usually produced within 10–60 days depending on alloy, temper, and quantity. Confirm the schedule when you request a quote.

Stellen Sie Werksprüfzeugnisse aus?

Yes. An MTC is provided with every order, and third-party test reports can be arranged on request.

Welche Oberflächenausführungen gibt es?

Mill finish, anodizing, polishing, powder coating, and PVC film are available depending on the form.

Wie lautet die Mindestbestellmenge?

We support low MOQs for custom requests. Share your required size and quantity for a quote.