5052 aluminum round tubes are a non-heat-treatable magnesium-alloyed product renowned for exceptional corrosion resistance in marine and saltwater environments. Supplied in O, H32, and H34 tempers, they offer excellent weldability, good formability, and moderate strength for structural, transportation, and industrial applications. Linsy provides seamless and welded 5052 round tubes with custom dimensions, MTC with every order, and comprehensive processing services.
Moduli disponibili: seamless round tube / welded round tube
Temperamenti comuni: O / H32 / H34
Supporto per l'elaborazione: cutting / bending / deburring / anodizing / powder coating
Documenti di qualità: MTC with every order, SGS reports on request
5052 aluminum is a non-heat-treatable 5xxx series alloy primarily alloyed with magnesium (2.2–2.8%) and a small amount of chromium (0.15–0.35%). It is one of the most widely used marine-grade aluminum alloys, valued for outstanding corrosion resistance in saltwater and chemical environments, excellent weldability, and good formability. Unlike 6xxx series alloys such as 6061, 5052 cannot be strengthened by heat treatment; instead, it is strengthened through strain hardening (cold work), producing tempers such as H32 and H34.
In round tube form, 5052 is commonly supplied in O (annealed), H32, and H34 tempers. The combination of moderate strength, high fatigue resistance, and superior corrosion resistance makes 5052 aluminum round tubes a preferred choice for marine, transportation, and structural applications where exposure to harsh environments is a concern.
Linsy supplies 5052 aluminum round tubes in seamless and welded configurations, with custom outer diameters, wall thicknesses, and lengths available to meet project-specific requirements. Below are the standard ranges; dimensions outside these ranges can be produced upon request.
Seamless 5052 round tubes are produced by extrusion or drawing, offering uniform wall thickness and excellent pressure resistance. They are ideal for hydraulic lines, marine fittings, and precision structural applications.
| Temperamento | Diametro esterno (mm) | Spessore della parete (mm) | Lunghezza (mm) |
|---|---|---|---|
| O, H32, H34 | 6 – 120 | 0.5 – 10 | 1,000 – 6,000 |
| Custom dimensions available upon request | |||
Welded 5052 round tubes are formed from rolled plate or sheet and welded along the seam. They offer a cost-effective solution for larger diameters and are suitable for general structural, architectural, and non-pressure applications.
| Temperamento | Diametro esterno (mm) | Spessore della parete (mm) | Lunghezza (mm) |
|---|---|---|---|
| O, H32, H34 | 20 – 300 | 1.0 – 15 | 1,000 – 6,000 |
| Custom dimensions available upon request | |||
In addition to round tubes, Linsy supplies 5052 aluminum in the following forms. Contact our team for specifications and pricing:
| Sistema di Designazione | Equivalent |
|---|---|
| AA (USA) | 5052 |
| EN (Europa) | EN AW-5052 |
| JIS (Giappone) | A5052 |
| GB/T (China) | 5052 (GB/T 3190) |
| ISO | AlMg2.5 |
| DIN (Germania) | AlMg2.5 / 3.3523 |
Applicable standards for tubes: ASTM B221 (Extruded Tubes), ASTM B210 (Drawn Seamless Tubes), GB/T 4437 (Extruded Tubes), EN 754 (Drawn Tubes).
The following composition meets ASTM B221 / GB/T 3190 requirements for 5052 aluminum.
| Elemento | Contenuto (%) |
|---|---|
| Si | 0,25 max |
| Fe | 0,40 max |
| Cu | 0,10 max |
| Mn | 0,10 max |
| Mg | 2.2 – 2.8 |
| Cr | 0.15 – 0.35 |
| Zn | 0,10 max |
| Altri, ciascuno | 0,05 max |
| Al | Equilibrio |
The mechanical properties of 5052 aluminum vary significantly with temper. The values below are typical for round tube products and are provided as reference. Actual properties may vary with production method and tube dimensions.
| Proprietà | 5052-O | 5052-H32 | 5052-H34 |
|---|---|---|---|
| Resistenza alla trazione, ultima (MPa) | 195 | 230 | 260 |
| Resistenza alla trazione, snervamento (MPa) | 90 | 195 | 215 |
| Allungamento a rottura (%) | 25 | 12 | 10 |
| Hardness (Brinell, HB) | 47 | 60 | 68 |
| Modulo elastico (GPa) | 70.3 | 70.3 | 70.3 |
Note: The above values are typical reference values based on ASTM standard data. Actual mechanical properties should be confirmed with the mill test certificate (MTC) for each production batch.
Choosing the right temper depends on the balance between formability and strength required for your application:
If your application involves significant bending or forming, O or H32 temper is recommended. For maximum strength with minimal post-forming, H34 is the preferred option.
5052 aluminum exhibits outstanding resistance to corrosion, particularly in marine and saltwater environments. The magnesium content provides a protective oxide layer that performs significantly better than 2xxx or 7xxx series alloys in chloride-containing environments. This makes 5052 round tubes ideal for boat components, dock hardware, and coastal structures.
5052 is readily welded using MIG (GMAW) and TIG (GTAW) processes with 5356 or 5554 filler wire. Unlike 6xxx series alloys, 5052 does not suffer from solidification cracking in most welding conditions. Welded joints typically retain 80–90% of the base metal strength in the annealed condition.
As a non-heat-treatable alloy, 5052 can be cold-formed into complex shapes without cracking. In the O temper, it offers excellent bendability and can be readily drawn, spun, or roll-formed. Even in H32 and H34 tempers, 5052 maintains good formability compared to other medium-strength aluminum alloys.
With a tensile strength range of 195–260 MPa depending on temper, 5052 provides moderate strength suitable for many structural and non-critical load-bearing applications. For higher strength requirements, 6061-T6 or 5083 may be more appropriate alternatives.
5052 aluminum demonstrates good fatigue resistance, making it suitable for applications subject to cyclic loading, such as vehicle frames and vibration-exposed structures. The strain-hardened tempers (H32, H34) offer improved fatigue performance over the annealed condition.
5052 aluminum round tubes are used across a wide range of industries where corrosion resistance, weldability, and moderate strength are required:
Linsy provides a range of processing and surface finishing services for 5052 aluminum round tubes:
Processing availability may vary with tube dimensions and order volume. Contact our engineering team to confirm specific processing requirements.
Every order of 5052 aluminum round tubes from Linsy is accompanied by the following quality documentation:
Certificazioni: Linsy operates under ISO 9001 (Quality Management), ISO 14001 (Environmental Management), and ISO 45001 (Occupational Health & Safety) certified systems. Products conform to applicable ASTM, EN, GB/T, and JIS standards.
With over 20 years of experience in aluminum manufacturing, Linsy Aluminum is a Shenzhen-based factory supplying 5052 aluminum round tubes to customers in 20+ countries. Our production capabilities cover both seamless and welded tube manufacturing, with full custom dimension support and low minimum order quantities.
We provide MTC with every order, SGS test reports on request, and comprehensive processing services including cutting, bending, and surface finishing. Our engineering team works closely with buyers to ensure material specifications, temper selection, and dimensional tolerances meet project requirements.
Whether you need 5052 round tubes for marine hardware, structural frames, or industrial piping, Linsy offers competitive pricing, reliable lead times, and responsive after-sales support. Contact us for a quick quote today.
Learn more about 5052 aluminum properties, comparisons, and applications through our knowledge hub:
5052 round tubes are commonly supplied in O (annealed), H32 (quarter-hard), and H34 (half-hard) tempers. H32 is the most popular for general-purpose applications, while O is preferred when maximum formability is needed.
Yes. 5052 has excellent weldability using MIG (GMAW) and TIG (GTAW) processes. Recommended filler wires include 5356 and 5554. The alloy is highly resistant to solidification cracking, making it one of the most weldable aluminum alloys available.
H32 is a quarter-hard temper with lower strength but better formability (UTS ~230 MPa, elongation ~12%). H34 is a half-hard temper with higher strength but reduced formability (UTS ~260 MPa, elongation ~10%). Choose H32 for applications requiring bending or forming; choose H34 for maximum strength.
Yes. 5052 is one of the best aluminum alloys for marine environments. Its high magnesium content provides excellent resistance to saltwater corrosion, making it ideal for boat railings, marine fittings, and dock hardware.
Seamless 5052 round tubes are available up to approximately 120mm OD. Welded tubes can be produced up to 300mm OD. Larger diameters may be available as custom orders — please contact our team with your specific requirements.
Yes. Custom lengths from 1,000mm to 6,000mm and custom wall thicknesses from 0.5mm to 15mm are available. Dimensions outside standard ranges can be discussed with our engineering team.
MOQ varies by product specification and form. Please contact our sales team with your requirements for a specific MOQ quote. We support low-MOQ orders for many standard sizes.
Standard sizes are typically ready for shipment within 10–30 days. Custom-produced items may require 30–60 days depending on specifications and order volume. Exact lead times are confirmed at quotation.
We accept T/T (telegraphic transfer), L/C (letter of credit), and other negotiated payment methods. Payment terms are discussed and agreed upon during the quotation process.
Yes, samples of standard 5052 aluminum round tubes can be provided for evaluation. Sample fees and shipping costs may apply. Contact our team to arrange samples.
Tubes are packaged in bundles with protective wrapping to prevent surface damage during transit. Custom packaging requirements, such as wooden cases or individual sleeve protection, can be accommodated upon request.
Linsy ships to 20+ countries worldwide, including North America, Europe, Southeast Asia, and the Middle East. We can arrange FOB, CIF, or DDP shipping terms per customer preference.
Vantaggi Linsy
Linsy Aluminum è un fornitore leader di prodotti per la lavorazione dell'alluminio, che serve diversi settori, tra cui quello aerospaziale, dell'ingegneria generale, automobilistico, marittimo, navale e altre applicazioni industriali specializzate.
Ci impegniamo a mantenere i più alti standard di qualità e responsabilità ambientale, come dimostrano le nostre certificazioni: ISO 9001:2008, ISO 14001:2004 e SGS.
