Lega di alluminio 1050

What Is 1050 Aluminum Alloy?

1050 aluminum alloy (UNS A91050) is a commercially pure aluminum grade in the 1000 series, with a minimum aluminum content of 99.5%. It is a non-heat-treatable alloy — its strength is developed through strain hardening (H-tempers) rather than heat treatment. The high purity gives 1050 its defining characteristics: excellent corrosion resistance, very high electrical and thermal conductivity, outstanding formability in the annealed (O) temper, and a clean, bright surface finish that takes well to anodizing.

1050 is often specified where electrical conductivity, thermal transfer, formability, or corrosion resistance matter more than tensile strength. Typical applications include electrical busbars and conductors, heat exchangers, lighting reflectors, chemical storage tanks, roofing and cladding, and a wide range of deep-drawn or spun components. Linsy supplies 1050 aluminum in sheet, coil, plate, bar, tube, wire, and custom profiles, with MTC reports provided for every order and SGS test reports available on request.

Available 1050 Aluminum Products

Linsy supplies 1050 aluminum in the full range of standard and custom product forms. Length, width, and dimensional tolerances can be tailored to your project requirements.

1050 Aluminum Sheet & Coil

Forma	Temperamento	Spessore (mm)	Larghezza (mm)	Lunghezza (mm)
1050 Sheet / Coil	O, H111, H112, H14, H18	0.3 – 6.0	500 – 2600	500 – 16000

1050 Aluminum Plate

Forma	Temperamento	Spessore (mm)	Larghezza (mm)	Lunghezza (mm)
1050 Plate	O, H112, H14	6.0 – 80	500 – 2600	500 – 16000

1050 Aluminum Bar

Forma	Temperamento	Diametro (mm)	Lunghezza (mm)
1050 Round Bar	O, H112	6 – 300	1000 – 6000

1050 Aluminum Tube

Forma	Temperamento	Diametro esterno (mm)	Spessore della parete (mm)	Lunghezza (mm)
1050 Aluminum Tube	O, H112	6 – 300	1 – 50	1000 – 6000

Filo di alluminio 1050

Forma	Temperamento	Diametro (mm)	Peso/Coil
Filo di alluminio 1050	O, H14, H18	0.8 – 20	Min. 50 kg

Custom Profiles & Other Forms

1050 aluminum is also available in custom extruded profiles, strips, and cut-to-size blanks. Contact Linsy with your drawing or specification to confirm feasibility and lead time.

1050 Aluminum Specifications & Equivalent Designations

1050 aluminum is produced and ordered against several major international standards. When sourcing or specifying material, the following equivalent designations and standards are commonly used:

Standard / Sistema	Denominazione
AA (Aluminum Association)	1050
UNS	A91050
EN AW (European)	EN AW-1050A
ISO 209	Al99.5
DIN (legacy)	Al99.5
JIS H 4000	A1050

Applicable product standards: ASTM B209 (sheet/plate), ASTM B210 (drawn tube), ASTM B211 (bar/rod), ASTM B221 (extruded bar/rod/tube/profile), EN 485-2, EN 573-3, ISO 6361.

Chemical Composition of 1050 Aluminum

The following composition limits are based on Aluminum Association and ISO 209 specifications for 1050 / Al99.5. These values represent the maximum allowable impurity levels unless shown as a minimum.

Elemento	Symbol	Min (%)	Max (%)
Silicio	Si	—	0.25
Ferro	Fe	—	0.40
Rame	Cu	—	0.05
Manganese	Mn	—	0.05
Magnesio	Mg	—	0.05
Zinco	Zn	—	0.05
Titanio	Ti	—	0.03
Altri (ciascuno)	—	—	0.03
Altri (totale)	—	—	0.10
Aluminum (Balance)	Al	99.50	—

Proprietà meccaniche in base al trattamento termico

1050 is a strain-hardenable alloy. Strength increases as the material is cold-worked through the H-temper series. The following values are typical for 1050 aluminum and are intended for material comparison and preliminary selection. Final design values should be verified against the applicable standard and the MTC for the specific lot.

Temperamento	Resistenza alla trazione (MPa)	Resistenza allo snervamento (MPa)	Allungamento (%)	Uso tipico
1050-O (Annealed)	75 – 95	≤ 35	≥ 35	Deep drawing, spinning, severe forming
1050-H111 / H112	80 – 100	≥ 40	≥ 25	General fabrication, lightly worked parts
1050-H14 (Half Hard)	100 – 120	≥ 80	≥ 6	General structural and formed parts
1050-H18 (Full Hard)	120 – 150	≥ 110	≥ 3	Parts requiring highest strength from cold work

Guida alla scelta della tempra

Because 1050 is non-heat-treatable, temper selection is based on the amount of strain hardening needed for your application. The following guide helps you choose the right temper for common use cases.

Temperamento	Condizione	Caratteristiche principali	Il migliore per
O	Fully annealed	Softest, maximum formability, lowest strength	Deep drawing, spinning, reflective parts, cookware
H111 / H112	Slightly strain hardened	Moderate strength, good formability	General sheet metal work, piping, lightly formed parts
H14	Half hard	Good balance of strength and formability	General fabrication, cladding, roofing, structural panels
H18	Full hard	Highest strength from cold work, low ductility	Rigid parts, stiffeners, non-formed components

Key Characteristics of 1050 Aluminum

Excellent Electrical & Thermal Conductivity

With approximately 61% IACS (International Annealed Copper Standard) electrical conductivity and around 222 W/m·K thermal conductivity, 1050 is widely used in electrical and thermal management applications. It is a cost-effective alternative to copper for busbars, cable sheathing, transformer windings, heat exchanger fins, and heat sinks.

Eccezionale resistenza alla corrosione

Like all high-purity aluminum grades, 1050 forms a strong, self-healing oxide layer that provides excellent resistance to atmospheric, industrial, and marine corrosion. It also resists many chemicals, including nitric acid and hydrogen peroxide, making it suitable for chemical storage and processing equipment.

Superior Formability & Workability

In the O temper, 1050 is exceptionally soft and ductile, excelling in deep drawing, spinning, stamping, and bending operations. This makes it a preferred material for lighting reflectors, cookware, decorative trim, and complex shaped components that require severe forming without cracking.

Weldability & Machinability

1050 is readily weldable using TIG, MIG, and resistance welding processes. The O temper is preferred for welded assemblies to avoid strength loss in the heat-affected zone. Machining 1050 requires sharp tools and proper clearance; it is gummy compared to alloyed grades but produces good surface finish when properly cut. Anodizing produces a bright, decorative finish on 1050 due to its high surface purity.

Applicazioni comuni

1050 aluminum is a versatile, cost-effective material used across a wide range of industries where high conductivity, corrosion resistance, and formability are more important than high strength.

Industria	Applicazioni tipiche	Why 1050 Is Used
Elettrico	Busbars, conductors, transformer windings, cable sheathing	High electrical conductivity, cost-effective vs copper
Gestione termica	Heat exchanger fins, heat sinks, cookware, radiator plates	High thermal conductivity, formability
Architectural & Construction	Roofing sheets, wall cladding, flashing, decorative trim, curtain wall panels	Corrosion resistance, bright finish, formability
Trattamento chimico	Storage tanks, piping, vessels for nitric acid handling	Chemical resistance, weldability, purity
Lighting	Reflectors, lamp housings, LED heat sinks	High reflectivity, formability, thermal conductivity
Automotive & General Engineering	Non-structural body panels, heat shields, gaskets, spacers	Formability, corrosion resistance, light weight
Food & Pharmaceutical	Brewing equipment, food contact tanks, packaging	Non-toxic, hygienic, corrosion resistant

Note sulla lavorazione e sulla finitura superficiale

Linsy’s Shenzhen factory supports a range of processing and value-added services for 1050 aluminum. Because 1050 is soft and gummy, proper tooling and feed rates are important for achieving clean results.

• CNC Machining: 1050 machines well with sharp carbide tooling and appropriate cutting speeds. It produces a fine surface finish but can be gummy at lower cutting speeds.
• Laser Cutting: 1050 cuts cleanly with fiber laser. Edge quality is excellent for a pure aluminum grade. Minimum recommended thickness depends on laser power; consult Linsy for specific limits.
• parti strutturali leggere e decorative 1050 is readily weldable with TIG or MIG. O-temper material is preferred for welded assemblies. Post-weld annealing may be considered if maximum formability is needed after welding.
• Anodizzazione: 1050 produces a bright, clear anodized finish due to its high surface purity. It is commonly specified for decorative trim and reflective surfaces.
• Lucidatura: The pure, silvery surface takes an excellent polish and is often used for decorative applications and lighting components.

Documenti di qualità e ispezione

Linsy Aluminum provides an MTC (Material Test Certificate) for every order, issued under Linsy Aluminum after production. The MTC includes chemical composition and mechanical property results for the specific production lot. For customers requiring additional third-party verification, SGS test reports are available on request at an additional testing cost. Available SGS report types include:

• Rapporto SGS sulla composizione chimica
• Rapporto SGS sulle proprietà meccaniche
• Rapporto di prova a ultrasuoni SGS (per lamiere spesse)
• Rapporto SGS su RoHS e REACH
• Rapporto di ispezione dimensionale SGS

Quality control covers the full process from raw material selection to finished product inspection. Linsy’s management system follows ISO 9001, ISO 14001, and ISO 45001 standards to support consistent product quality and responsible manufacturing practices.

Why Choose Linsy for 1050 Aluminum

Linsy Aluminum is a Shenzhen-based aluminum factory with more than 20 years of industry experience. We focus on factory-direct aluminum supply, inventory support, and low-MOQ custom production for customers who need both standard materials and project-based specifications.

For 1050 aluminum alloy, Linsy offers:

• Broad product form coverage: Sheet, coil, plate, bar, tube, wire, and custom profiles in 1050 aluminum.
• Flexible temper options: O, H111, H112, H14, and H18 tempers available from stock or custom production.
• Custom size support: Cut-to-size, special dimensions, and non-standard tolerances supported with low MOQs for non-stock items.
• Processing integration: In-house CNC machining, laser cutting, TIG/MIG welding, anodizing, and polishing reduce the need for multiple suppliers.
• Documented quality: MTC with every order; SGS third-party testing available on request.
• Responsive lead time: Typical custom lead time 10–60 days depending on alloy, dimensions, processing requirements, and order complexity.

Risorse correlate

The following guides and articles provide deeper technical background on 1050 aluminum alloy and related selection topics:

• Tutto quello che c'è da sapere sulla lega di alluminio 1050

1050 Aluminum FAQ

What is 1050 aluminum alloy used for?

1050 aluminum is commonly used in electrical busbars and conductors, heat exchanger fins, roofing and cladding, chemical storage tanks, lighting reflectors, cookware, and a wide range of deep-drawn or spun components where formability and corrosion resistance matter more than high strength.

Is 1050 aluminum heat-treatable?

No. 1050 is a non-heat-treatable aluminum alloy. Its strength is developed through strain hardening (H-tempers) rather than heat treatment. The common tempers are O (annealed), H111, H112, H14, and H18.

What is the difference between 1050 and 1060 aluminum?

Both are 1000 series pure aluminum alloys. 1050 has a minimum aluminum content of 99.5%, while 1060 has a minimum of 99.6%. The slightly higher purity of 1060 gives it marginally better electrical and thermal conductivity, but the differences are small for most commercial applications.

Can 1050 aluminum be welded?

Yes. 1050 is readily weldable using TIG, MIG, and resistance welding. The O temper is preferred for welded assemblies to preserve maximum ductility in the heat-affected zone. Post-weld stress relief annealing may be considered for severely formed parts.

Does Linsy provide MTC for 1050 aluminum orders?

Yes. Linsy provides an MTC (Material Test Certificate) for every order, issued under Linsy Aluminum after production. SGS third-party test reports are also available on request at an additional testing cost.

What temper should I choose for deep drawing 1050 aluminum?

The O (annealed) temper is strongly recommended for deep drawing, spinning, and other severe forming operations. O-temper 1050 is at its softest and most ductile, minimizing the risk of cracking during forming.

Can 1050 aluminum be anodized?

Yes. 1050 produces a bright, clear anodized finish due to its high surface purity. It is commonly specified for decorative trim, lighting reflectors, and architectural applications where appearance matters.

What is the electrical conductivity of 1050 aluminum?

1050 aluminum has approximately 61% IACS (International Annealed Copper Standard) electrical conductivity and around 222 W/m·K thermal conductivity, making it suitable for electrical busbars, transformer windings, and thermal management components.

Domande frequenti generali sugli ordini

What is the minimum order quantity (MOQ) for 1050 aluminum?

Linsy supports low-MOQ custom production for non-stock items. For in-stock standard sizes, MOQ is typically one piece. Contact us with your requirement for a specific quote.

What is the typical lead time for custom 1050 aluminum orders?

Typical custom lead time is 10–60 days depending on the alloy, dimensions, processing requirements, and order complexity. In-stock standard sizes can be shipped sooner.

Does Linsy ship 1050 aluminum internationally?

Yes. Linsy supplies aluminum products to customers in Europe, South Africa, Brazil, Singapore, Turkey, Japan, South Korea, and across South and Southeast Asia.

Can I request a sample before placing a full order?

Yes. Sample pieces in standard sizes are often available. Contact Linsy to confirm availability for your specific requirement.

What payment methods does Linsy accept?

Linsy accepts standard international payment methods including T/T and L/C. Specific terms can be confirmed during the quotation process.