1060 aluminum alloy (UNS A91060, EN AW-1060/Al99.6) is a commercially pure aluminum grade containing a minimum of 99.6% aluminum. As a 1xxx series alloy, 1060 is non-heat-treatable and offers excellent corrosion resistance, high thermal and electrical conductivity, outstanding formability, and good reflectivity. Widely used in chemical equipment, electrical conductors, food processing, heat exchangers, and general sheet metal work, 1060 is one of the most cost-effective pure aluminum grades for industrial applications. Linsy supplies 1060 aluminum sheet, plate, coil, bar, tube, and wire in tempers O, H12, H14, H16, H18, and H112, with custom sizes, surface finishing, and MTC reports available.
Moduli disponibili: sheet / plate / coil / bar / tube / wire / strip / foil
Temperamenti comuni: O / H12 / H14 / H16 / H18 / H112
Supporto per l'elaborazione: CNC machining / laser cutting / TIG & MIG welding / polishing / anodizing / PVC protective film
Documenti di qualità: Rapporto MTC allegato a ogni ordine; rapporti di prova SGS disponibili su richiesta
1060 aluminum alloy (UNS A91060, EN AW-1060/Al99.6) is a commercially pure wrought aluminum grade in the 1xxx series, containing a minimum of 99.6% aluminum by weight. As a non-heat-treatable alloy, 1060 derives its properties entirely from its high-purity composition and cold working. It is recognized for its excellent corrosion resistance, high electrical and thermal conductivity, outstanding formability, and good reflectivity — making it a preferred material for electrical, chemical, and food-processing applications where strength is secondary to purity and chemical inertness.
1060 accepts both cold and hot forming well, is readily weldable by conventional methods including TIG (GTAW) and MIG (GMAW), and responds well to anodizing and polishing. It is approved under major international standards including ASTM B209 (sheet and plate), ASTM B210 (drawn seamless tube), ASTM B211 (rolled or cold-finished bar, rod, and wire), ASTM B221 (extruded bar, rod, tube, and profiles), ISO 6361, and EN 573-3.
Linsy supplies 1060 aluminum in a full range of standard and custom product forms. Length, width, and dimensional tolerances can be tailored to your project requirements. Custom cut-to-size and cut-to-length options are available on request.
| Forma | Temperamento | Spessore (mm) | Larghezza (mm) | Lunghezza (mm) |
|---|---|---|---|---|
| 1060 Sheet / Coil | O, H12, H14, H16, H18, H112 | 0.3 – 6.0 | 500 – 2600 | 500 – 16000 |
| Forma | Temperamento | Spessore (mm) | Larghezza (mm) | Lunghezza (mm) |
|---|---|---|---|---|
| 1060 Plate | O, H112 | 6.0 – 200 | 500 – 2600 | 500 – 12000 |
| Forma | Temperamento | Diametro (mm) | Lunghezza (mm) |
|---|---|---|---|
| 1060 Round Bar | O, H112 | 3 – 300 | 1000 – 6000 |
| Forma | Temperamento | Diametro esterno (mm) | Spessore della parete (mm) | Lunghezza (mm) |
|---|---|---|---|---|
| 1060 Tube | O, H112 | 6 – 300 | 0.5 – 20 | 1000 – 6000 |
| Forma | Temperamento | Diametro (mm) |
|---|---|---|
| 1060 Wire | O, H14, H18 | 0.2 – 12 |
In addition to the standard forms above, Linsy can supply 1060 aluminum strip and foil for electrical, packaging, and industrial applications. Custom 1060 aluminum profiles can be produced to your drawings. Contact us with your specifications for a quote.
| Standard | Denominazione |
|---|---|
| UNS | A91060 |
| EN / EN AW | EN AW-1060 / Al99.6 |
| AA (Aluminum Association) | 1060 |
| JIS | A1060 |
| GB (Chinese Standard) | 1060 |
| ISO | Al 99.6 |
Applicable ASTM standards for 1060:
The chemical composition of 1060 aluminum alloy conforms to ASTM B209 and EN 573-3 standards. Values are weight percent (%).
| Elemento | Min % | Max % |
|---|---|---|
| Alluminio (Al) | 99.60 | — |
| Ferro (Fe) | — | 0.35 |
| Silicio (Si) | — | 0.25 |
| Zinco (Zn) | — | 0.05 |
| Rame (Cu) | — | 0.05 |
| Manganese (Mn) | — | 0.03 |
| Magnesio (Mg) | — | 0.03 |
| Titanio (Ti) | — | 0.03 |
| Vanadio (V) | — | 0.05 |
| Altri, Ciascuno | — | 0.03 |
| Altri, Totale | — | 0.10 |
Note: Aluminum content is the balance. Individual element maximums are per ASTM and EN standards. Full composition per your ordered ASTM grade will be confirmed on the MTC.
The following mechanical properties are typical for 1060 aluminum sheet and plate per ASTM B209 at room temperature. Actual values depend on product form, thickness, and processing history. Please refer to the MTC for your specific order.
| Proprietà | Valore tipico |
|---|---|
| Resistenza alla trazione (finale) | 70 – 95 MPa |
| Tensile Strength (Yield, 0.2% offset) | 20 – 35 MPa |
| Allungamento a rottura | 25 – 40% |
| Proprietà | Valore tipico |
|---|---|
| Resistenza alla trazione (finale) | 85 – 120 MPa |
| Tensile Strength (Yield, 0.2% offset) | 70 – 105 MPa |
| Allungamento a rottura | 5 – 15% |
| Proprietà | Valore tipico |
|---|---|
| Resistenza alla trazione (finale) | 125 – 150 MPa |
| Tensile Strength (Yield, 0.2% offset) | 115 – 140 MPa |
| Allungamento a rottura | 2 – 8% |
1060 is a non-heat-treatable alloy in the 1xxx series. Its strength and formability are controlled entirely by the work-hardening condition (H temper) or the annealed state (O temper). There are no T tempers for 1060.
| Temperamento | Descrizione | Il migliore per |
|---|---|---|
| O (ricotto) | Fully annealed — softest condition, maximum ductility | Deep drawing, spinning, stamping, and complex forming operations |
| H12 | Strain-hardened — Quarter-hard | Moderate forming with slightly improved strength |
| H14 | Strain-hardened — Half-hard | General sheet metal work, moderate bending and forming |
| H16 | Strain-hardened — Three-quarter hard | Parts requiring higher strength with limited forming |
| H18 | Strain-hardened — Full-hard, maximum strength from cold work | Flat parts, chemical equipment panels, nameplates |
| H112 | As-fabricated — suitable for products with no special strain hardening or thermal treatment control | Plates and thicker sections used as-supplied |
Important: H22, H24, and H26 tempers (strain-hardened and partially annealed) may also be available for 1060 aluminum. Contact us if you need these intermediate tempers.
With a minimum aluminum content of 99.6%, 1060 offers excellent resistance to atmospheric corrosion, fresh water, and many chemical environments. The high purity minimizes intermetallic particles, reducing susceptibility to pitting and galvanic corrosion. 1060 is commonly used in chemical storage tanks, food processing equipment, and marine atmospheric environments where corrosion resistance is the primary requirement.
1060 aluminum has an electrical conductivity of approximately 61% IACS (International Annealed Copper Standard) — among the highest of all aluminum alloys. Its thermal conductivity is approximately 234 W/m·K at 25°C. These properties make 1060 the material of choice for electrical bus bars, conductor wire, heat exchanger fins, and heat sink components in power electronics.
Pure aluminum 1060 exhibits excellent cold and hot formability. In the O temper, it can be deep-drawn, spun, stamped, and bent to tight radii without cracking. The alloy is readily weldable by TIG (GTAW) and MIG (GMAW) welding processes, as well as by resistance welding. Filler metal 1100 or 4043 is typically recommended for fusion welding of 1060. Note that weld zones will be in the annealed condition; if post-weld strength is required, consider the application context — 1060 is generally selected for corrosion resistance and conductivity rather than structural strength.
1060 aluminum can be cold-formed in the O (annealed) temper to tight bend radii. H tempers offer progressively higher strength but reduced formability — choose the temper based on the severity of your forming requirements. For deep drawing operations, the O temper is recommended.
Like most pure aluminum grades, 1060 is relatively soft and tends to be gummy during machining. Use sharp carbide or high-speed steel tools, adequate clearance angles, and proper lubrication or coolant for best results. For applications requiring extensive machining, consider if a harder alloy such as 5052 or 6061 may be more suitable.
1060 is highly weldable by TIG (GTAW) and MIG (GMAW). Filler metal 1100 or 4043 is recommended. Resistance welding (spot and seam welding) also performs well on 1060 due to its high electrical conductivity. Note that the heat-affected zone (HAZ) reverts to the annealed (O) condition — if the application requires full temper strength after welding, post-weld cold working is typically not practical, and a different alloy selection may be more appropriate.
Linsy offers the following surface finishing options for 1060 aluminum:
Every order of 1060 aluminum from Linsy includes a Mill Test Certificate (MTC) issued in our name, documenting the heat number, chemical composition, and mechanical properties for your specific lot. No order is shipped without its MTC.
For projects requiring independent third-party verification, SGS test reports are available on request at additional testing cost. The following SGS report types are available for 1060 products:
Linsy Aluminum is a Shenzhen-based aluminum factory with more than 20 years of industry experience, specializing in full-spectrum aluminum supply across the 1000–8000 series alloys. We supply 1060 aluminum sheet, plate, coil, bar, tube, and wire from broad inventory, supported by low-MOQ custom production for non-stock sizes and specifications. Our factory-direct model means competitive pricing, responsive communication, and end-to-end quality control from raw material selection to finished product inspection.
Linsy holds ISO 9001 (Quality Management), ISO 14001 (Environmental Management), and ISO 45001 (Occupational Health & Safety) certifications. Our in-house processing capabilities — CNC machining, TIG and MIG welding, laser cutting, polishing, anodizing, and PVC protective film application — allow us to deliver 1060 aluminum material in ready-to-use condition, reducing your downstream handling and processing costs. Typical custom lead time is 10–60 days, depending on dimensions and processing requirements.
1060 aluminum is a commercially pure wrought aluminum alloy containing at least 99.6% aluminum. It belongs to the 1xxx series and is non-heat-treatable. It is valued for its excellent corrosion resistance, high electrical and thermal conductivity, and outstanding formability.
No. 1060 is a 1xxx series pure aluminum and cannot be strengthened by heat treatment. Its mechanical properties are controlled entirely by cold working (strain hardening) — the H tempers (H12, H14, H18, etc.) indicate the degree of cold work. The softest condition is the O (annealed) temper.
Both are pure aluminum grades in the 1xxx series. 1060 has a minimum aluminum content of 99.60%, while 1100 has a minimum of 99.00%. 1060 is purer, which means better corrosion resistance, higher electrical conductivity, and slightly softer mechanical properties. 1100 has slightly more alloying elements (primarily iron and silicon), giving it marginally higher strength. For most applications, they are functionally similar, and the choice often comes down to availability and cost. A detailed comparison blog post is available in our Related Resources section.
Linsy supplies 1060 aluminum in O (annealed), H12 (quarter-hard), H14 (half-hard), H16 (three-quarter hard), H18 (full-hard), and H112 (as-fabricated) tempers. H22, H24, and H26 tempers (strain-hardened and partially annealed) may also be available. Note that 1060 does not have T tempers — if you see “T” temper designations for 1060, they are incorrect. Refer to the Temper Selection Guide above for temper descriptions and recommended applications.
Yes. 1060 is highly weldable by TIG (GTAW), MIG (GMAW), and resistance welding methods. Recommended filler metals are 1100 (for matching purity) or 4043 (for improved fluidity). The weld heat-affected zone will be in the annealed condition — if post-weld strength is critical, evaluate whether a different alloy is more appropriate for your application.
1060 aluminum in the O temper has an electrical conductivity of approximately 61% IACS at 20°C — one of the highest among aluminum alloys. This makes it a preferred material for electrical bus bars, conductors, and transformer components where aluminum weight savings are desired compared to copper.
Yes. Every order of 1060 aluminum from Linsy includes a Mill Test Certificate (MTC) documenting the heat number, full chemical composition, and mechanical properties for your specific production lot. SGS third-party test reports are also available on request for additional verification.
Typical custom production lead time for 1060 aluminum at Linsy is 10–60 days, depending on the specific temper, dimensions, processing requirements, and order volume. Stock items can ship within days. Contact us with your specifications for a project-specific lead time estimate.
Yes. Linsy supports low-MOQ custom production for non-stock items and accepts mixed-specification orders for project-based purchasing. Contact our sales team with your requirements for a quote.
Linsy is certified to ISO 9001 (Quality Management Systems), ISO 14001 (Environmental Management Systems), and ISO 45001 (Occupational Health & Safety Management Systems). These certifications apply to our company operations. SGS test reports for individual orders are available on request at additional testing cost.
Send your material specifications — alloy, temper, product form, dimensions, quantity, surface finish requirements, and any processing needs — through our contact form or directly to our sales team. We respond with pricing and lead time within one business day.
Yes. We supply 1060 aluminum in both standard and custom dimensions. Length, width, thickness, and diameter can be tailored to your project. We also offer cut-to-size and cut-to-length services.
Yes. Linsy ships aluminum products globally, including to Europe, North America, Southeast Asia, the Middle East, Africa, and South America. Export packaging compliant with international shipping standards is used for all overseas orders.
Vantaggi Linsy
Linsy Aluminum è un fornitore leader di prodotti per la lavorazione dell'alluminio, che serve diversi settori, tra cui quello aerospaziale, dell'ingegneria generale, automobilistico, marittimo, navale e altre applicazioni industriali specializzate.
Ci impegniamo a mantenere i più alti standard di qualità e responsabilità ambientale, come dimostrano le nostre certificazioni: ISO 9001:2008, ISO 14001:2004 e SGS.
