Lega di alluminio 1090

What Is 1090 Aluminum Alloy?

1090 aluminum alloy (UNS A91090, EN AW-1090) is a high-purity 1000 series aluminum grade with a minimum aluminum content of 99.90%. It is one of the purest aluminum alloys available in commercial form, offering exceptional electrical and thermal conductivity, superior corrosion resistance, and excellent ductility. Because of its high purity, 1090 is softer than most aluminum alloys and is typically supplied in annealed (O) or strain-hardened (H14, H18) tempers.

Linsy supplies 1090 aluminum in sheet, coil, bar, tube, and wire forms, with custom dimensions available. Every order ships with an MTC report, and SGS test reports are available on request. Typical lead time is 10–60 days depending on specification and quantity.

Available 1090 Aluminum Products

Linsy supplies 1090 aluminum in the following standard and custom product forms. Dimensions can be tailored to your project requirements; contact our sales team for non-standard sizes.

1090 Aluminum Sheet & Coil

Forma	Temperamento	Spessore (mm)	Larghezza (mm)	Lunghezza (mm)
1090 Sheet / Coil	O, H14, H18	0.3 – 6.0	500 – 2600	500 – 16000

1090 Aluminum Plate

Forma	Temperamento	Spessore (mm)	Larghezza (mm)	Lunghezza (mm)
1090 Plate	O, H14	6.0 – 80	500 – 2600	500 – 16000

1090 Aluminum Bar

Forma	Temperamento	Diametro (mm)	Lunghezza (mm)
1090 Round Bar	O, H14	6 – 300	500 – 6000

1090 Aluminum Tube

Forma	Temperamento	OD (mm)	Spessore parete (mm)	Lunghezza (mm)
1090 Tube / Pipe	O, H14	6 – 300	0.5 – 20	500 – 6000

1090 Aluminum Wire

Forma	Temperamento	Diametro (mm)	Peso/Coil
1090 Wire / Rod	O, H14, H18	0.8 – 30	Min 50 kg/coil

1090 Aluminum Specifications & Equivalent Designations

Standard	Denominazione
UNS	A91090
EN AW	EN AW-1090 / Al 99.9
ISO	Al99.9
ASTM B209	1090 Aluminum Sheet & Plate
ASTM B211	1090 Aluminum Bar, Rod, Wire
ASTM B221	1090 Aluminum Extruded Bar, Tube, Profiles
GB/T	1090 (L2)

Chemical Composition of 1090 Aluminum

Elemento	Contenuto (%)
Alluminio (Al)	≥ 99.90 (Balance)
Ferro (Fe)	≤ 0.07
Silicio (Si)	≤ 0.05
Rame (Cu)	≤ 0.02
Magnesio (Mg)	≤ 0.01
Manganese (Mn)	≤ 0.01
Zinco (Zn)	≤ 0.03
Titanio (Ti)	≤ 0.01
Other each	≤ 0.01
Other total	≤ 0.03

Values are typical composition limits for 1090 aluminum alloy. Confirm final specification against ASTM B209 or your ordering standard.

Mechanical Properties of 1090 Aluminum by Temper

Proprietà	1090-O	1090-H14	1090-H18
Resistenza alla trazione (MPa)	60 – 95	110 – 130	140 – 165
Resistenza allo snervamento (MPa)	20 – 45	90 – 110	120 – 140
Allungamento (%)	≥ 30	≥ 8	≥ 4
Electrical Conductivity (% IACS)	≥ 62 (typical for 99.9% Al)
Conduttività termica (W/m-K)	~ 230 (typical)

O-temper values from source data; H14 and H18 values are typical references and should be verified against mill test reports for critical applications.

1090 Aluminum Tempers & Selection Guide

Selecting the correct temper depends on your forming requirements and final strength needs:

• O (Annealed): Fully soft, maximum ductility and formability. Recommended for deep drawing, spinning, and applications where maximum electrical conductivity is required. Lowest strength.
• H14 (Half Hard): Strain-hardened to approximately half the full-hard condition. A good balance of formability and moderate strength. Suitable for bent or lightly formed parts.
• H18 (Full Hard): Maximum strength among the common 1090 tempers. Used when high yield is more important than formability. Not recommended for severe forming.

Key Characteristics of 1090 Aluminum

Exceptional Electrical & Thermal Conductivity

With a minimum purity of 99.90% Al, 1090 offers electrical conductivity of approximately 62% IACS or higher, making it one of the best conductive aluminum alloys. This also gives it excellent thermal transfer properties for heat exchanger and reflector applications.

Resistenza alla corrosione superiore

Pure aluminum forms a dense, protective oxide layer that resists atmospheric, chemical, and saltwater corrosion. 1090 performs exceptionally well in harsh chemical environments where alloyed grades may be attacked.

High Purity & Low Outgassing

The minimal impurity content makes 1090 suitable for sensitive electronic and vacuum applications where outgassing or contamination must be minimized.

Excellent Formability (O Temper)

In the annealed condition, 1090 is extremely ductile and can be deep-drawn, spun, or bent without cracking. This makes it ideal for complex capacitor can shapes and reflective housings.

Common Applications of 1090 Aluminum

• Electronics & Electrical: High-voltage electrolytic capacitor foils, busbars, transformer windings, and conductive pads where high purity reduces losses.
• Trattamento chimico: Protective linings for chemical storage tanks, gaskets, and laboratory equipment where contamination from alloying elements must be avoided.
• Illuminazione e ottica: High-end architectural lighting reflectors, optical enclosures, and decorative trim that can be polished to a mirror finish.
• Trasmissione di potenza: Specialized electrical connectors and conductive components requiring low resistance and high purity.
• Gestione termica: Heat sinks and thermal transfer plates where high thermal conductivity is required.

Note sulla lavorazione e sulla finitura superficiale

1090 aluminum is highly formable in O temper but has low strength compared to 2xxx, 5xxx, 6xxx, or 7xxx series alloys. Consider the following when planning processing:

• finiture e rivestimenti visibili dove la finitura è importante Standard laser cutting, waterjet, and shear cutting are suitable. Because 1090 is soft, tooling should be sharp to avoid material buildup.
• involucri e staffe che richiedono un buon aspetto 1090 machines poorly in O temper (gummy, long chips). H14 or H18 tempers machine better. Use sharp tools and ample coolant.
• parti strutturali leggere e decorative 1090 can be TIG or MIG welded using 1xxx series filler wire. Welded joints will have lower strength than the base material. For electrical applications, consider resistance welding to avoid contamination.
• Anodizzazione: 1090 anodizes to a clear, transparent oxide layer. Because of the high purity, the anodized finish appears colorless and may show slight variation. For decorative mirror finishes, polishing before anodizing gives the best result.
• Finitura superficiale: 1090 can be polished to a high reflectivity (up to ~85% reflectance) and is often used in lighting reflectors for this reason.

Documenti di qualità e ispezione

Linsy provides the following quality documentation with every 1090 aluminum order:

• MTC (Mill Test Certificate): Included with every shipment, reporting actual chemical analysis and mechanical test results for the supplied batch.
• SGS test reports: Available on request for third-party verification of composition or properties.
• Dimension inspection report: Upon request, detailing actual vs. nominal dimensions.
• RoHS / REACH compliance: Declaration available on request.

Linsy is certified under ISO 9001 (quality management), ISO 14001 (environmental management), and ISO 45001 (occupational health and safety).

Why Choose Linsy for 1090 Aluminum

Linsy focuses on high-purity and specialty aluminum alloys for demanding industrial applications. For 1090 aluminum, we offer:

• Purity assurance: Every coil or batch can be supplied with spectrographic analysis confirming ≥99.90% Al content.
• Custom dimensions: Non-standard thicknesses, widths, and lengths are available. Discuss your drawing or specification with our technical team.
• Surface quality: For reflector and optical applications, we can supply 1090 with controlled surface roughness and no occlusions.
• Flexible order sizes: Low minimum order quantities available for prototype and R&D runs.
• Export experience: Linsy supplies 1090 aluminum to customers in Europe, East Asia, Southeast Asia, and the Americas, with all export documentation handled in-house.

Risorse correlate

More technical guides and comparison articles are available in our aluminum knowledge base. Contact us if you need help selecting between high-purity and alloyed aluminum grades for your application.

1090 Aluminum FAQ

Q: What is the difference between 1090 and 1060 / 1070 / 1100 aluminum?
A: 1090 has the highest minimum purity (99.90% Al) among these grades. 1100 is the most common commercial pure aluminum (99.0% min Al) and is less expensive. Choose 1090 when electrical conductivity, corrosion resistance, or purity are critical.

Q: Can 1090 aluminum be used for welded assemblies?
A: Yes. 1090 can be welded using 1xxx series filler. Note that the weld zone will not match the base material’s high purity, which may affect corrosion performance in aggressive chemical environments.

Q: What surface finish is available for lighting reflector applications?
A: 1090 sheet can be supplied with a mill finish, bright finish, or pre-polished. For maximum reflectivity, specify bright-rolled or polished sheet. Anodizing after polishing can protect the reflective surface.

Q: Is 1090 available in extruded profiles?
A: 1090 has very low strength and is rarely extruded. Most 1090 products are rolled (sheet/coil/plate) or drawn (wire/tube). If you require a specific profile, contact our engineering team to evaluate feasibility.

Q: What is the typical lead time for 1090 aluminum orders?
A: Standard sizes are typically available in 10–60 days. Custom dimensions or tempers may require additional production time. Your sales contact will confirm the schedule when you request a quote.

Domande frequenti generali sugli ordini

Q: What is the minimum order quantity (MOQ)?
A: MOQ varies by product form and specification. For standard sheet and coil, MOQ typically starts from 500 kg. Contact us with your requirement for a specific quote.

Q: Does Linsy provide samples before bulk order?
A: Yes, sample pieces can be arranged for evaluation. Sample cost and shipping are typically borne by the buyer unless otherwise agreed.

Q: What payment terms are available?
A: Linsy accepts T/T, L/C, and other standard international payment methods. Payment terms can be discussed based on order size and customer profile.

Q: Can Linsy cut to size?
A: Yes, Linsy offers cut-to-length, slitting, and CNC cutting services. Specify your required dimensions when requesting a quotation.