7049 aluminum is a high-strength 7xxx series alloy with high zinc and copper content, formulated primarily as a forging grade. It offers excellent resistance to stress-corrosion cracking and good machinability, which makes it a frequent choice for critical structural forgings in aerospace and missile applications. It is generally considered non-weldable and is best supplied as forged or machined parts. Linsy supplies 7049 in plate, bar, and forging stock with mill test certificates on every order.
Dostępne formularze: plate, bar / rod, forging stock
Typowe temperamenty: F, H112, O, T352, T6, T651, T73, T7451
Wsparcie w zakresie przetwarzania: CNC machining, laser cutting, TIG/MIG welding, anodizing, polishing, powder coating
Dokumenty dotyczące jakości: Raport MTC dołączany do każdego zamówienia
7049 aluminum is a high-strength 7xxx series alloy with high zinc and copper content, formulated primarily as a forging grade. It offers excellent resistance to stress-corrosion cracking and good machinability, which makes it a frequent choice for critical structural forgings in aerospace and missile applications. It is generally considered non-weldable and is best supplied as forged or machined parts. Linsy supplies 7049 in plate, bar, and forging stock with mill test certificates on every order.
Available tempers: F, O, T6, T651, T7451, H112
| Temperament | Grubość (mm) | Szerokość (mm) | Długość (mm) |
|---|---|---|---|
| F, O, T6, T651, T7451, H112 | 0.5 – 200 | 500 – 2600 | 500 – 16000 (cut-to-length) |
Available tempers: T73, T352
| Temperament | Średnica (mm) | Długość (mm) |
|---|---|---|
| T73, T352 | 3 – 300 | 500 – 12000 |
Available tempers: T73, T352
| Temperament | Available forms | Note |
|---|---|---|
| T73, T352 | Bloom, billet, disc | Custom forging on request |
7049 aluminum (EN AW-7049, AlZn8MgCu) is supplied to common wrought-alloy specifications. Typical standards by form: ASTM B209 (sheet and plate), ASTM B221 (extruded tube, bar, and profiles), ASTM B211 (bar and rod), and ASTM B313 (welded tube). Forging stock follows ASTM B247. Always confirm the exact specification and temper with our team for your order.
| Element | Procent (%) |
|---|---|
| Si | maks. 0,40 |
| Fe | 0.35 max |
| Cu | 1.2 – 1.9 |
| Mn | 0,20 maks. |
| Mg | 2.1 - 2.9 |
| Cr | 0.10 – 0.22 |
| Zn | 7.6 - 8.4 |
| Ti | 0,10 maks |
| Zr | 0,25 maks |
| Inni (każdy) | 0.05 |
| Inne (łącznie) | 0.15 |
| Al | Równowaga |
| Temperament | Wytrzymałość na rozciąganie (MPa) | Granica plastyczności (MPa) | Wydłużenie (%) | Wytrzymałość na ścinanie (MPa) |
|---|---|---|---|---|
| T73 | 483 – 517* | 414 – 448* | 7 – 12* | 150 – 340* |
| T352 | 483 – 517* | 414 – 448* | 7 – 12* | 150 – 340* |
Values are typical for the indicated condition. An em dash (—) means the value was not available in the source data; confirm with the mill certificate. Asterisked values are estimates pending verification — see the audit report.
Among the strongest 7xxx forging alloys.
T73 / T7451 tempers resist cracking in aggressive environments.
Cuts cleanly on CNC equipment.
Design as forged or machined parts; welding is not recommended.
Linsy supplies 7049 as plate, bar, and forging stock, then CNC-machines and laser-cuts to print. It is not recommended for welding. For corrosion protection, anodizing or painting is advised, and the T73 / T7451 tempers should be specified where stress-corrosion resistance is critical.
Linsy is a Shenzhen-based aluminum supplier with more than 20 years of experience. Our quality system is certified to ISO 9001, ISO 14001, and ISO 45001. Every order ships with a mill test certificate (MTC). SGS third-party test reports are available on request. Typical custom lead time is 10–60 days depending on temper, size, and quantity.
For deeper reading on 7xxx selection and fabrication, see our guides on aluminum alloy selection and welding 7000-series alloys. (Internal links to be connected to published Linsy blog articles.)
No, 7049 is generally considered non-weldable and is supplied as forged or machined components.
The overaged T73 and T7451 tempers give the best resistance to stress-corrosion cracking; use them for critical aerospace structures.
The source mechanical data for 7049 was partially corrupted. Values shown are typical and must be verified against the mill certificate before release.
Every order ships with an MTC, and SGS third-party test reports are available on request.
Custom aluminum orders typically ship in 10–60 days depending on alloy, temper, size, and quantity. Stock or standard sizes may be faster — ask our team.
Yes. Every order includes an MTC. SGS third-party test reports are available on request.
Yes. We provide CNC machining, laser cutting, welding, anodizing, polishing, and powder coating so parts can be delivered closer to finished form.
Send your alloy, temper, dimensions, quantity, and required standard. Our team will confirm availability, lead time, and pricing.
Zalety Linsy
Linsy Aluminium jest wiodącym dostawcą produktów do obróbki aluminium, obsługującym różne branże, w tym lotnictwo, inżynierię ogólną, motoryzację, przemysł morski, stoczniowy i inne specjalistyczne zastosowania przemysłowe.
Dążymy do utrzymania najwyższych standardów jakości i odpowiedzialności za środowisko, o czym świadczą nasze certyfikaty: ISO 9001:2008， ISO 14001:2004 oraz SGS.
