Linsy A357 is a premium aluminum-silicon-magnesium casting alloy known for its outstanding combination of high strength, excellent weldability, and superior pressure tightness. Its fine microstructure and low iron content minimize porosity and deliver high integrity in thin-walled, highly stressed castings. Commonly supplied in the T6 temper, A357 is a preferred choice for aerospace and high-performance automotive components where fatigue resistance matters.
Dostępne formularze: ingot / die casting / sand casting / permanent-mold casting / CNC-machined cast parts
Typowe temperamenty: T6 / T5
Wsparcie w zakresie przetwarzania: CNC machining / polishing / anodizing / heat treatment
Dokumenty dotyczące jakości: Raport MTC dołączany do każdego zamówienia
Linsy A357 is a premium aluminum-silicon-magnesium casting alloy known for its outstanding combination of high strength, excellent weldability, and superior pressure tightness. Its fine microstructure and low iron content minimize porosity and deliver high integrity in thin-walled, highly stressed castings. Commonly supplied in the T6 temper, A357 is a preferred choice for aerospace and high-performance automotive components where fatigue resistance matters.
Linsy supplies A357 in the forms most useful for foundries and component buyers. Standard and custom dimensions are available; contact our team for non-listed sizes.
| Formularz | Typical Size / Specification | Common Use |
|---|---|---|
| Ingot | Standard ingot weights; remelt stock | Foundry remelting |
| Die casting | Per drawing; wall 1.5–8 mm | Complex thin-wall parts |
| Sand casting | Up to ~600 mm envelope | Aerospace / pump housings |
| Permanent-mold casting | Per drawing | Structural components |
| CNC-machined casting | Tolerances per ISO 2768 | Finished parts |
The tables below list the alloy’s common commercial and standard designations. Cross-references follow widely used naming systems; verify the exact designation required for your target market.
| System | Oznaczenie |
|---|---|
| Former / trade style | A357 |
| AA (Stowarzyszenie Aluminium) | A357 |
| PL | EN AC- series (market dependent) |
| ASTM | ASTM B26 / B85 (castings), B179 (ingot) |
Composition limits below follow common casting-alloy standards. Values are weight percent, balance aluminum. Confirm exact limits against your required specification.
| Element | Content (wt.%) |
|---|---|
| Si | 6.5–7.5 |
| Fe | 0,15 maks |
| Cu | 0,10 maks |
| Mn | 0,10 maks |
| Mg | 0.45–0.70 |
| Ti | 0.10–0.20 |
| Być | 0.04–0.07 (grain refiner) |
| Sr | 0.02–0.04 (modifier, optional) |
| Zn | 0.05 max |
| Inni, każdy | 0.03 max |
| Pozostałe, ogółem | 0,10 maks |
| Al | Reszta |
The values below are typical room-temperature properties for the indicated condition and should be confirmed against mill test data for your specific casting and heat treatment. Casting method, section thickness, and cooling rate affect results.
| Temperament | Wytrzymałość na rozciąganie (MPa) | Granica plastyczności (MPa) | Wydłużenie (%) |
|---|---|---|---|
| T6 | 310–330 | 245–265 | 3.5–5.0 |
| T5 | 240–290 | 180–220 | 3.0–5.0 |
Choose the temper based on your priority between strength, ductility, and dimensional stability:
| Temperament | When to Use |
|---|---|
| T6 | Solution heat treated and artificially aged. Highest strength and fatigue resistance; use for highly stressed structural castings. |
| T5 | Artificially aged only (no solution treatment). Improved strength with lower cost and distortion than T6. |
A357-T6 delivers among the highest strengths available in a cast Al-Si-Mg alloy, suitable for structural aerospace and automotive parts.
Low iron and fine microstructure reduce porosity, making A357 ideal for impellers, pump bodies, and housings under pressure.
Good weldability combined with high fatigue strength supports fabricated and dynamically loaded assemblies.
A357 is typically solution heat treated and aged to T6. Welding is feasible with care; post-weld heat treatment may be required to restore properties. Machining follows standard aluminum practice. Anodizing and polishing are supported for appearance and corrosion protection.
Every A357 shipment is delivered with an MTC (material test certificate) covering chemical composition and mechanical properties as ordered. Dimensional inspection and third-party verification (e.g. SGS report, available on request) can be arranged. Our production system is managed under ISO 9001, ISO 14001, and ISO 45001.
Linsy operates a Shenzhen-based aluminum manufacturing facility with over 20 years of experience across the 1000–8000 series and a broad range of casting grades. We support both ingot supply and finished cast components with in-house CNC machining, polishing, and anodizing.
For A357 we emphasize melt cleanliness and low-iron practice to protect fatigue life in aerospace-grade castings.
A357 has a tighter silicon range and tighter impurity control than A356, giving more consistent strength and better weldability. Choose A357 when fatigue and pressure tightness are critical.
Specify T6 for maximum strength and fatigue resistance. Use T5 where moderate strength with lower distortion is acceptable.
For standard ingot and common sand/permanent-mold castings, typical lead time is 10–60 days depending on temper, quantity, and any required machining or surface finishing. Confirm exact timing with our sales team when requesting a quote.
Yes. Every shipment is supplied with an MTC (material test certificate / inspection report) covering chemical composition and mechanical properties as ordered.
We support custom dimensions, casting method selection, heat treatment (F, T4, T5, T6 as applicable), and downstream CNC machining, polishing, and anodizing. Share your drawing or spec and we will quote against it.
Our casting alloys are produced and inspected against widely recognized standards such as ASTM B26/B85 and EN 1706. Specific designation cross-references are listed on each product page; confirm the exact standard requirement for your market when ordering.
Use the RFQ form or contact our sales team with alloy, temper, form, dimensions, quantity, and required certificates. Our engineers will respond with availability and pricing.
Zalety Linsy
Linsy Aluminium jest wiodącym dostawcą produktów do obróbki aluminium, obsługującym różne branże, w tym lotnictwo, inżynierię ogólną, motoryzację, przemysł morski, stoczniowy i inne specjalistyczne zastosowania przemysłowe.
Dążymy do utrzymania najwyższych standardów jakości i odpowiedzialności za środowisko, o czym świadczą nasze certyfikaty: ISO 9001:2008， ISO 14001:2004 oraz SGS.
